不同阶段猪用颗粒饲料物理性能的对比分析

对某饲料厂不同阶段猪用4种颗粒饲料的物理性能包括直径、长度、硬度、容重、含粉率和耐久性指数（Pellet Durability Index, PDI）等进行测定,对结果进行归类总结并采用统计学的方法参照有关标准进行分析。结果表明,4种颗粒饲料直径在2.87~3.94 mm之间,母猪料直径最大,小猪料最小,两两之间差异显著（P<0.05）,而且随着猪只年龄的增加,颗粒饲料的直径呈递增趋势。颗粒长度在8.62~11.94 mm之间,以大猪料最长,小猪料最短,长径比偏高。颗粒硬度在3.86~6.47 kg之间,以大猪料最大,小猪料最小,中小猪料显著低于大猪料和母猪料（P<0.05）,只有小猪料符合有关要求。颗粒容重在576.7~614.6 g/L之间,母猪料最大,小猪料最小,两两之间差异显著（P<0.05）,与直径呈相同的增减趋势。含粉率以小猪料最大,且只有小猪料与大猪料之间差异显著（P<0.05）。颗粒PDI以大猪料最大,小猪料最小,各阶段猪料的含粉率和PDI均符合有关要求。建议饲料厂家注重颗粒饲料物理性能指标的控制,调整饲料配方和工艺参数,不断改进颗粒饲料的质量。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

Establishing an eyeball-weight relationship for Litopenaeus vannamei using machine vision technology

This study aimed to establish a shrimp eyeball-weight relationship model for Litopenaeus vannamei using machine vision technology. A total of 295 shrimp were sampled from a recirculating aquaculture system (RAS). The long-axis length (d), body length (L), and body weight (W) of each individual was measured. The long axis length of the shrimp eyeball was identified and measured using machine vision technology. Continuous fitting and piecewise fitting models were used to construct the eyeball-weight relationship model for L. vannamei. The continuous fitting relationship model was described as: W = 38.865d^2.7914, while the piecewise model was described as: d < 2 mm, W = 0.0326d^3.7363, R² = 0.9288; 2 mm ≤ d < 3.9 mm, W = 0.0401d^3.104, R² = 0.9629; 3.9 mm ≤ d < 5.8 mm, W = 0.0421d^3.0311, R² = 0.9216; 5.8 mm < d, W = 0.103d^2.6226, R² = 0.9457. The root mean square error (RMSE) of the piecewise fitting model (0.0244, 0.1575, 0.5034, 0.7072) was smaller than the continuous fitting model (0.8229). The correlation coefficient (R²) of the piecewise model (0.9288, 0.9629, 0.9216, and 0.9457) was similar to that of the continuous fitting model (R² = 0.9621). The results indicated that the piecewise fitting model is suitable for calculating the biomass of L. vannamei in RAS and provides a novel way of estimating the biomass of L. vannamei cultured in RAS. The piecewise fitting model can also provide the foundation of evaluating the production of shrimp using underwater image recognition in intelligent aquaculture systems.     

中国高粱光温类型的初步研究

1、在短光照或温室条件件下高粱品种出苗～抽穗期日数显著缩短,供试品种平均比对照分别缩短12.5天和13.635天,缩短百分率分别为18.8和20.5;伴随苗穗期日数的缩短,叶片数在短光或温室条件下分别减少3.9和4.275片,减少百分数分别为22.24和24.22;株高分别降低60.15和47.65厘米,降低百分数为25.88和20.5,表明光、温直接影响高粱的生育进程和器官建成的数量与结构。 2、高粱品种生育日数变化主要反映在出苗～抽穗期。出苗～抽穗日数在短光或温室条件下分别减少18.8％和20.5％.而抽穗～成熟日数仅减少5.1％和8.3％,表明高粱出苗～抽穗期是光温反应的最大效应期。 3、不同品种在短光或温室条件下性状变化的趋势一致,但程度明显不同;同一品种同一性状在上述条件下变化程度也不同。根据供试品种对光温敏感的程度划为四大类群,其数量与地理分布如下: Ⅰ、光温敏感型,占试验品种总数的20％.分布在长江以北,辽宁以南地区。Ⅱ、温敏感型,包括温敏感光中度敏感型和温敏感光迟钝型,占25%,分布在黄河以北,北纬45℃以南的山西、内蒙、辽宁、河北北部和吉林南部。Ⅲ、光敏感型、包括光敏感沮中度敏感型和光敏感温迟钝型,占12.5％,分布在黄河(北纬35°)以南,南岭(北纬25°)以北地区。Ⅳ、中度敏感型占42.5％,分布广且没有明显的地带性。试验未发现对光、温都迟钝的类型。北方温敏感型品种较多,短日性较弱,南方光敏感型品种较多,短日性强、感温性中等或较弱。不同光温类型的形成、分布与其所处的生态环境即光温条件和栽培制度密切相关。 4、温敏感型和光敏感型中早熟品种较多,占86％,光温敏感型品种既有早熟的,中熟的、也有晚熟的,所以光温敏感的品种不一定全是早熟品种,而晚熟品种也并非对光温反应不敏感。中度敏感型品种也有早熟、中熟和晚熟之分。在不同光温条件和栽培制度下,不同光温类型熟性变化的主导因素不同。 5、光、温在形成高粱不同类型过程中的效应是相互联系而又有区别的,光、温效应对不同环境下的不同类型有主次之分,大小之别;光、温效应在高粱不同发育阶段既是同步性的,又是顺序性的。     

应用极大似然法分析小麦穗长的遗传

采用质量—数量性状遗传的极大似然分析方法,对长穗小麦品系93(220)的主茎穗长进行了质量—数量遗传模型测验和主、微基因效应与变异估计。结果表明:长穗小麦新品系93(220)的主茎穗长为一典型的质量—数量性状,由一个主基因和若干微基因共同控制;一对隐性主基因控制穗长,附合加性——显性遗传模型,F1代表现为部分显性,隐性主基因增加主茎穗长的效应平均为1.47,微基因遗传效应为2.83cm,隐性主基因个体主茎穗长表现为长穗。     

RT-PCR及RFLP分析技术对鸡传染性支气管炎病毒的诊断和S1基因分型的研究

本研究使用分别扩增整个S1糖蛋白基因 (引物A)和S1糖蛋白基因N_端高变区Ⅰ (引物B)的 2对引物对 3个IBV标准株M41、Connecticut、Arkansas及 5个地方分离株 (C60 ,D41A ,D41B ,A112 1,A1171)进行RT_PCR扩增。用引物A时 ,有 5个IBV毒株扩增到目的片段 (172 0bp) ;用引物B时 ,所有 8个IBV毒株均得到与预计大小相符的目的产物 (2 2 8bp)。对 172 0bp的PCR产物用限制性内切酶HaeⅢ进行酶切 ,结果得出 3个不同的RFLP图谱 ,其中M41、Connecticut、D41B具有相同的HaeⅢ酶切图谱。Arkansas和D41A则分别具有互不相同的图谱 ;对 2 2 8bp的PCR产物进行DdeⅠ、RsaⅠ限制性内切酶消化 ,根据它们的RFLP图谱 ,8个IBV毒株可分为 5个基因型。综合 2对引物的PCR产物的RFLP分析结果 ,8个IBV毒株可分为 7个基因型 ,分型的结果与传统的血清学方法吻合。本研究建立的方法和技术具有快速、简单、特异、灵敏等优点 ,为现场流行毒株的定型(基因型 /血清型 )及其S1基因变异的跟踪研究以及更有效防制传染性支气管炎奠定了基础。     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

苎麻属野生种的光反应类型研究

对苎麻属11个野生种资源进行了10h、13h、16h光照处理，在不同光长条件下，表现出短光照生育期缩短、长光照生育期延长；短光照生育期延长、长光照生育期缩短；长、短光照生育期都延长；长、短光照生育期都缩短四个类型，并且不同光照时间对不同的生殖生长期有不同的影响，生长发育的积温差异较大。     

BR农用荧光灯补光育苗的研究

对黄瓜、番茄在育苗前期进行短时间的人工补光有明显促进生长的效果。农用荧光灯(BR)的补光效果优于日光型荧光灯(W)。早春育苗进行人工补光的时间以下午自然光照强度稍高于光补偿点、叶片气孔尚未关闭之前为好,呼和浩特、包头3月份16:00、4月份17:00开始补光为宜。补光的光强度在500～800lx 效果明显。光源距幼苗的距离以10cm 为宜。     

亚麻工艺长相关性状的通径分析

本试验以6个普通亚麻品种为材料,进行工艺长相关性状的通径分析。结果表明,5个相关性状对工艺长度影响大小顺序为:单株粒重>单株粒数>千粒重>株高>主茎分枝数。降低单株粒重是提高工艺长度的主要途径。在千粒重、单株粒重相对稳定的类型中,选择植株较高、单株粒数较多者,或在株高、单株粒数相对稳定的类型中,选择千粒重较高者是提高工艺长度的重要途径。减少主茎分枝数亦可有效提高工艺长度,但作用较小。