Nuclear transfer in loach (Paramisgurnus dabryanus Sauvage) by cell-to-cell electrofusion

To study nuclear transfer in the loach (Paramisgurnus dabryanus Sauvage), blastula and gastrula cells were fused with UV-inactivated oocytes by cell-to-cell electrofusion. To facilitate nuclear transfer, blastula and gastrula cells were cultured or incubated at 4 °C in different solutions. TC-199 medium supplemented with 20% calf serum was the best culture solution, and effectively retained the totipotence of blastula or gastrula cells for up to 10 days. It was found that gastrula cells incubated at 4 °C had the same totipotence as blastula cells. The optimal UV dosage for inactivation of the oocyte chromatin was 180–240 mJ cm⁻². Electrofusion was carried out in a cone-shaped fusion chamber, which permitted the recipient oocyte and the donor blastula cell to contact one another. The electrofusion procedure resulted in a 10% success rate of normal-appearing fish. Genetic analysis indicated that the nuclear material originated from the donor cell (blastomere) and the oocyte pronucleus did not take part in development.     

奶牛冷冻胚胎规模化移植效果研究

为了提高奶牛良种化程度,对奶牛冷冻胚胎的规模化移植效果进行了研究。结果表明:PG二次肌注法的发情率显著高于(P<0.05)PG一次肌注法,两种方法的发情同期率均超过85%,受体牛发情时间多集中在肌注PG后48～72h;胚胎解冻后的复苏率达到82.58%,且早期囊胚与囊胚的复苏率要高于桑椹胚(P>0.05);共移植受体牛218头,受胎97头,受胎率为44.5%,且春、秋季的移植效果差异不显著(P>0.05)。为奶牛冻胚的规模化移植研究提供了参考依据。     

波尔山羊胚胎移植影响因素的分析

波尔山羊胚胎移植效果受诸多因素的影响，供体状况、药物、季节等因素使供体超排效果产生较大的差异，而受体状况、胚胎质量等对受体的妊娠率产生较大的影响，这些因素阻碍了波尔山羊胚胎移植的产业化应用。本文对以上影响波尔山羊胚胎移植效果的因素进行了分析，以期为提高胚胎移植效率提供依据，从而促进波尔山羊胚胎移植产业化进程。     

家畜繁殖生物技术研究现状及趋势

牛胚胎移植技术已趋于成熟。我国新疆牧科院用一步细管法移植牛冻胚受胎率达41%;牛和羊鲜胚四分胚移植也产下1头犊牛和6只羔羊。家畜体外受精,因卵子体外成熟和受精卵体外培养尚不过关,目前仍停留在实验室阶段。胚胎性别鉴定,1990年Koopman发现单拷贝基因,该基因是Y染色体的性决定区,命名为SRY,可利用PCR技术制成雄性特异DNA探针盒,进行马、牛、羊、猪早期胚胎性别鉴定。北京农学院等单位用PCR扩增牛SRY序列进行奶牛胚胎性别鉴定准确率达100%。英、日、法等国已获得牛胚胎细胞核移植后代;我国也获得1只核移植兔。北农大和新疆牧科院合作以绵羊精子为载体导入牛生长激素基因rMTbGH DNA成功,外源基因整合率为3%。     

A grower-friendly method to transfer predacious mites to commercial orchards

The establishment of predacious mites in commercial orchards may be accelerated by the transfer of pruned wood in winter and summer from donor orchards to release orchards. Following winter pruning, 3-year-old and older wood is collected and transported as soon as possible in bundles to a release orchard for distribution. If the release orchard is composed of dwarf trees, then one or two bundles of 5 kg each are placed vertically at the base of the trunk of every tree in the block (0.5 to 1 ha); if the trees are of standard size, then four or five bundles used. Following summer pruning, annual shoots and suckers are distributed immediately in a release orchard composed of dwarf trees by placing 12–15 branches on the foliage of fruit-bearing branches; if the release orchard is composed of standard trees, then 50 branches are used. The pruned wood should have 20–25 leaves and not less than one predator per leaf. The release orchard should have a light infestation (two or three mites per leaf) of pest tetranychids. These phytophagous mites would serve as food and help establish the predators. The release orchard grower should develop a pest management program based on the same groups of pesticides used in the donor orchard. http://www.phytoparasitica.org posting Aug. 31, 2005.     

Meiotic competence of mouse oocytes reconstructed by replacing the germinal vesicle with a male pronucleus and somatic nucleus

The present study examines the contribution of the nucleus to meiotic competence in mouse oocytes that were reconstructed using nuclear transfer. Three types of reconstructed oocytes were produced: MP‐GV, by transplanting the male pronucleus (MP) into germinal vesicle (GV) stage oocytes; 3T3‐GV, by transplanting the nucleus of a National Institute of Health (NIH) 3T3 cell into a GV stage oocyte; and 3T3‐MII, by transplanting the nucleus of an NIH 3T3 cell into a metaphase II (MII) stage oocyte. The fusion rates differed, but not significantly, in the MP‐GV, 3T3‐GV, and 3T3‐MII groups (77, 63, 56%, respectively). Then, meiotic competence was compared in MP‐GV, 3T3‐GV and non‐manipulated GV stage oocytes as a control. Nuclear envelope breakdown occurred in all the reconstructed oocytes, as well as the control ones. The percentage of first polar body extrusion differed between the MP‐GV (100%), 3T3‐GV (72%), and control (67%) groups. DNA staining with Hoechst 33342 revealed that in the MP‐GV‐group oocytes that had reached MII stage, the chromosomes were condensed and aligned in a regular array similar to the normal metaphase plate. By contrast, in 3T3‐GV group oocytes, the condensed chromosomes were irregularly scattered in the cytoplasm. These results suggest that the donor nucleus affects meiotic competence in reconstructed oocytes.     

基于NGO-CNN-SVM的高标准农田灌溉工程施工成本预测

为提高高标准农田项目施工成本的预测精度,控制施工成本在合理范围,减少投资风险,该研究从单体灌溉工程施工成本预测角度出发,通过随机森林（random forest,RF）筛选出高标准农田灌溉工程施工成本的关键影响因素,结合卷积神经网络（convolutional neural networks,CNN）和支持向量机（support vector machine,SVM）两种模型的优点,通过北方苍鹰优化算法（northern goshawk optimization,NGO）对模型里的惩罚因子和核参数进行寻优,构建基于NGO-CNN-SVM的施工成本预测模型。通过辽宁省2018—2023年高标准农田工程中灌溉工程的施工成本数据,选取样本决定系数R²、平均绝对误差MAE、平均绝对百分比误差MAPE和均方根误差RMSE作为精度指标进行分析,结果表明：基于NGO-CNN-SVM的施工成本预测模型在渠道工程中MAE低于0.615万元,RMSE低于0.512万元,R²达到0.968以上,相对误差小于4.210%;在进水闸工程中MAE低于0.610万元,RMSE低于0.536万元,R²达到0.966以上,相对误差小于4.410%;在桥涵工程中MAE低于0.494万元,RMSE低于0.477万元,R²达到0.970以上,相对误差小于3.548%,并相比较于反向传播神经网络,CNN和CNN-SVM模型,NGO-CNN-SVM模型的预测结果均最优。通过特征选择、模型融合、算法优化以及不同模型对比表明NGO-CNN-SVM模型具有更高的预测准确率和泛化性,可为高标准农田灌溉工程施工成本预测提供理论依据。     

云南省6县退耕还林农户收益分析及增收对策的案例研究

采取抽样调查的方式,对云南省6个地(市)退耕农户进行调研,对农户的林业收入状况、在退耕地所经营的林业项目以及退耕面积与收益等3方面进行深入剖析,认为农户的林业收入有高型、中高型、中等型、偏低型以及低下型5种类型.对退耕还林发展林业过程中面临的主要问题和促进当地林业发展、增加农户收入的对策进行了探讨.     

落叶松干燥过程水分扩散性的研究-Crank方法与Dincer方法的使用

采用两种改进的多孔固体材料水分扩散偏微分方程分析求解方法,即Dincer方法与Crank方法,分析并计算落叶松干燥过程的水分扩散系数(D)与水分传递系数(k)。使用扩散型微分方程对落叶松干燥过程进行数学模拟,木材试件被理想化为无限大平板状材料,假定木材内部水分的扩散过程是一维的。实验测定了不同干燥介质条件下木材干燥动力曲线。基于取得的实验数据,通过Dincer方法计算了木材水分扩散系数(D)与水分传递系数(k);使用传统的Crank方法分析计算了木材动态水分扩散系数(D)。研究表明,使用Dincer方法计算的木材水分扩散系数(D)均大于相应实验条件下Crank方法计算数值,接近1个数量级。这种结论应该是由于两种分析求解方法间的差异以及水分扩散与热量传递数学求解间的差异。因此相关的水分扩散微分方程的分析求解方法有待改进。随干燥介质温度的升高,木材水分扩散系数(D)与水分传递系数k均显著增大,可以采用Arrhenius方程与木材结合水传递理论来分析解释实验条件下的扩散系数(D)与干燥介质温度(T)间的变化趋势。图2表3参6。