无核葡萄胚发育及早期离体培养的研究:Ⅲ.培养方式对离体胚发育的影响

对5个无核葡萄品种的试验表明,不同培养方式对离体胚发育的影响是很明显的,其中4个品种胚发育率液体培养高于固体培养,‘京早晶’在液体培养中胚发育率高达73.7%,是目前国内外胚发育率最高的报道;液体培养比固体培养胚的发育程度高,发育整齐,无畸形胚,易成苗.     

波尔山羊胚胎数量、质量与受体移植妊娠率的关系

本文就波尔山羊胚胎数量，质量与受体移植妊娠率的关系进行了探讨。结果表明：胚胎质量优劣是直接影响胚胎移植成功率的关键因素。移植胚胎数量因品种不同有差异。移植双胚，奶山羊受体胚胎成羔率53．4％，明显高于成都麻羊胚胎成羔率36．3％，成都麻羊单胚成羔率为66．7％。     

水平连续铸钢凝固过程数值模拟

本文在分析水平连铸传热特征的基础上，给出了一维情况下，计算结晶器出口处铸坯凝固层厚度的解析式，建立了计及轴向传热的连续坯凝固模拟模型。进行了连续坯二维传热的凝固数值模拟，其模拟结果与实验结果吻合较好，具有普遍应用价值。     

金属热防护系统多层隔热材料的传热分析及参数优化

采用能量平衡方程和离散坐标法近似地建立了金属热防护系统多层隔热材料的一维稳态传热的数学模型，并利用遗传算法和纤维隔热材料的有效导热系数试验数据求解传热反问题，从而得到了模型中的纤维隔热材料的辐射衰减系数、反照率和隔热屏表面辐射发射系数。最后，由实验测得了多层隔热材料的有效导热系数，验证了采用优化参数后，多层隔热材料的传热模型的正确性。     

影响体细胞核移植效率的因素

哺乳动物体细胞核移植 (克隆 )是近年来迅速发展起来的一项新技术 ,对濒危动物保护、优良种畜快速扩群以及核质关系的研究、药物试验等诸多领域都具有重大意义。但体细胞核移植是一项程序繁杂的工作 ,每一步操作所采用的试剂、材料和方案等都会影响到核移植效率 ,因而其影响因素十分众多。文章根据目前已有资料 ,论述了卵母细胞来源、卵母细胞与供体细胞的胞质容量、卵母细胞的去核方案、体细胞供体动物的年龄、供体细胞的组织来源与传代次数及供体细胞的冷藏、冷冻和所处的细胞周期阶段对核移植效率的影响。另外 ,对重组胚的融合 -激活方案、核移植方案及重构胚的培养方案对核移植效率的影响也作了简要论述。     

Nutrient digestibility of angling baits for carp, Cyprinus carpio, with implications for groundbait formulation and eutrophication control

Abstract  To evaluate the suitability of angling groundbaits as a fish feed and the potential for nutrient loss, the macronutrient digestibility of four groundbaits was investigated in carp, Cyprinus carpio L., using a sieving method of faeces collection and chromic oxide. Apparent digestibility coefficients (ADCs) of protein and lipids were >80% for all angling baits. ADCs of nitrogen-free extracts and phosphorus (P) differed significantly between the test diets, probably because of divergent feed compositions and ingredient treatments. The generally high digestibility estimates indicated that fish feeding on angling groundbait will benefit from this food source. The differences in nutrient digestibility suggested that type of groundbait and ingredient used will have a major effect on potential eutrophication and fish production caused by groundbaiting. The principle of groundbaits to protect the environment should be to minimise the P-content of the groundaits and maximising P-digestibility and P-retention efficiency.     

直接利用传递函数对分叉结构进行模态综合

建立了一种直接利用传递函数对分叉结构进行模态综合的方法。传统的方法一般都需要对大矩阵进行求逆运算,而此方法只涉及分叉结构结合部的传递函数矩阵的求逆,因此求逆计算量很小,特别是当直接采用传递函数的测量值进行模态综合时,就更体现出它的优越性。     

Nuclear transfer in loach (Paramisgurnus dabryanus Sauvage) by cell-to-cell electrofusion

To study nuclear transfer in the loach (Paramisgurnus dabryanus Sauvage), blastula and gastrula cells were fused with UV-inactivated oocytes by cell-to-cell electrofusion. To facilitate nuclear transfer, blastula and gastrula cells were cultured or incubated at 4 °C in different solutions. TC-199 medium supplemented with 20% calf serum was the best culture solution, and effectively retained the totipotence of blastula or gastrula cells for up to 10 days. It was found that gastrula cells incubated at 4 °C had the same totipotence as blastula cells. The optimal UV dosage for inactivation of the oocyte chromatin was 180–240 mJ cm⁻². Electrofusion was carried out in a cone-shaped fusion chamber, which permitted the recipient oocyte and the donor blastula cell to contact one another. The electrofusion procedure resulted in a 10% success rate of normal-appearing fish. Genetic analysis indicated that the nuclear material originated from the donor cell (blastomere) and the oocyte pronucleus did not take part in development.     

纤维板表面粉末涂料的涂饰工艺

研究一种在纤维板表面进行粉末涂装再转移印花的新工艺.结果表明:纤维板粉末涂装基材预处理采用预热干燥,表面砂光,控制含水率为6%～8%;喷涂上粉量为333.33～388.89 g·m-2;固化条件为180 ℃,15～25 min.采用干燥箱中热转移方式,转移印花温度为(160±10)℃,时间15～20 min.按GB/T 4893-85和GB/T1733-79测试涂膜性能,涂膜附着力等级为2级,耐磨性等级为1级,耐水性合格,耐液性等级为1级.图1表4参9     

奶牛冷冻胚胎规模化移植效果研究

为了提高奶牛良种化程度,对奶牛冷冻胚胎的规模化移植效果进行了研究。结果表明:PG二次肌注法的发情率显著高于(P<0.05)PG一次肌注法,两种方法的发情同期率均超过85%,受体牛发情时间多集中在肌注PG后48～72h;胚胎解冻后的复苏率达到82.58%,且早期囊胚与囊胚的复苏率要高于桑椹胚(P>0.05);共移植受体牛218头,受胎97头,受胎率为44.5%,且春、秋季的移植效果差异不显著(P>0.05)。为奶牛冻胚的规模化移植研究提供了参考依据。