筒式结构拆除的力学分析

根据力学原理，分析讨论了钢筋混凝土筒式结构定向倾倒的切口高度和切口角度．     

天山云杉人工幼林树冠结构及其在林分间伐中的应用研究

本文对天山云杉人工幼林树冠结构以及树冠结构与林木之间的关系进行了研究，并基于生物学原理，在确定有效树冠的法础上，通过决定林木能力的树冠特征对其人林分间伐中的应用进行了初步研究。     

Evaluation of Transmittance and Reflectance Pulse Oximetry in a Canine Model of Hypotension and Desaturation

Ten, anesthetized dogs were instrumented with three pulse oximeter probes; two lingual transmittance probes and one rectal reflective probe. Arterial oxygen desaturation was produced by decreasing the inspired oxygen concentration. Hypotension was produced with an infusion of nitroprusside. Simultaneous pulse oximeter readings (SpO₂) were compared to co-oximeter measured arterial saturation (SaO₂) collected over a range of SaO₂ (50–100%) and mean arterial pressures (40–100mmHg). Each of the monitors and means of evaluating SpO₂ studied provided accurate SpO₂ measurements over a range of mean arterial pressure from 40–100mmHg. All of the monitors tested tended to overestimate the SaO₂ when the arterial saturation was less than 70%.     

小麦矮秆育种中性状间关系的多元分析

以7个株高梯度系列的35个系统及5个亲本品种为材料,采用典范分析和逐步回归分析研究了株高及其构成因子与产量因子、产量生理性状间的关系。结果表明:①株高因子通过产量生理性状影响产量因子,一定的生物学产量是获得高产的基础。②矮秆品种的高化对提高产量、千粒重和收获指数有利,对蛋白质含量的影响不明显;高秆品种矮化能显著提高收获指数,对籽粒的蛋白质含量影响不大。③在主要性状符合育种目标的前提下,选择倒二节间较长、第一和第二叶间距略长、穗颈和穗部较长的类型可能对提高产量有利。     

四川的云南松地径胸径相关关系及其应用研究

本文报道了四川的云南松树干在部三个不同部位直径(地表直径d0．00、0.05m高处直径d0.05、0.1Om高处直径d0.10)与胸径(d1．3)的相关关系，利用其编制了四川云南松地径一元材积表，并对其在四川云南松林区进行盗伐木、滥砍乱伐木材积估计和监测森林资源消耗量等方面的应用进行了探讨。四川云南松地径与胸径最佳关系模型为二次抛物线回归方程，相关系数r=0，999217～0．999380，剩余平方和Q=179．3391～226．4480，且d0.10与d1．3相关关系最为紧密。     

SSR-based genetic linkage analysis of resistance to crown rust (Puccinia coronata f. sp. lolii) in perennial ryegrass (Lolium perenne)

Crown rust (caused by Puccinia coronata f. sp. lolii) is a serious foliar disease of the pasture and turfgrass perennial ryegrass (Lolium perenne). Previous genetic studies have detected both qualitative and quantitative resistance mechanisms, and interpretation of the genetic system is complicated by variation within the sexually reproducing pathogen. Resistant and susceptible parental genotypes of ryegrass were identified using a composite urediniospore population collected from three geographically distinct locations. A two-way pseudo-testcross mapping population was obtained as the F₁ progeny of the pair-cross between ryegrass parental genotypes Vedette₆ and Victorian₉. Both parents showed intermediate resistance against a pathogen population collected in a single geographical zone (Hamilton, Victoria), but in the F₁ population, significant variation for a range of resistance-associated characters was detected. Statistical analysis of phenotypic data suggested a major gene effect, hence bulked segregant analysis with map-assigned simple sequence repeat (SSR) markers was used to scan the genome. A marker showing strong association with resistance was assigned to linkage group (LG) 2 of perennial ryegrass. Analysis of 11 LG2 SSR markers defined an interval between loci xlpssrh03f03 and xlpssrk02e02 as containing the gene or genes (LpPc1) conferring crown rust resistance. Resistance gene determinants were inherited from both parents, with up to 80% of the total phenotypic variation explained by markers segregating from Vedette₆ and up to 26% of the variation explained by markers segregating from Victorian₉. The two contributions together resulted in an additive increase in effect, with fully resistant individuals requiring determinants from both parents. A conserved syntenic relationship was observed with linkage group B of Avena strigosa, which is the location of a cluster of resistance genes to the oat form of crown rust. The implications of this study for marker-assisted selection of disease resistance in perennial ryegrass are discussed.     

Prediction of chemical composition and peroxide value in unground pet foods by near‐infrared spectroscopy

The massive development of the pet food industry in recent years has lead to the formulation of hundreds of canine and feline complete extruded foods with the objective of meeting both the needs of the animals and numerous demands from pet owners. In the meantime, highly variable raw material compositions and the industry's new production techniques oblige manufacturers to monitor all phases of the extrusion process closely in order to ensure the targeted composition and quality of the products. This study aimed at evaluating the potential of infrared technology (visible and near‐infrared spectrophotometer; 570–1842 nm) in predicting the chemical composition and peroxide value (PV) of unground commercial extruded dog foods. Six hundred and forty‐nine commercial extruded dog foods were collected. For each product, an unground aliquot was analysed by infrared instrument while a second aliquot was sent to a laboratory for proximate analysis and PV quantification. The wide range of extruded dog food typologies included in the study was responsible for the wide variability observed within each nutritional trait, especially crude fibre and ash. The mean value of the 208 pet foods sampled for PV quantification was 17.49 mEq O₂/kg fat (min 2.2 and max 94.10 mEq O₂/kg fat). The coefficients of determination in cross‐validation of NIRS prediction models were 0.77, 0.97, 0.83, 0.86, 0.78 and 0.94 for moisture, crude protein, crude fat, crude fibre, ash and nitrogen‐free extract (NFE) respectively. PV prediction was less precise, as demonstrated by the coefficient of determination in cross‐validation (0.66). The results demonstrated the potential of NIRS in predicting chemical composition in unground samples, with lower accuracy for moisture and ash, while PV prediction models suggest use for screening purposes only.     

四个紫花苜蓿品种种子萌发期耐盐性研究

在实验室内模拟的盐分条件下,用不同浓度的Na Cl盐溶液对4个紫花苜蓿品种(中苜1号、中苜3号、中草3号和陇东苜蓿)种子萌发期进行盐胁迫处理。结果表明:低浓度(0.2%和0.4%)的盐溶液对苜蓿的发芽率和幼苗苗高抑制作用不显著,对幼根具有一定的刺激作用。0.8%和1.0%的Na Cl溶液处理下发芽率、0.6%的Na Cl溶液处理下的幼苗苗高和幼根生长量可以作为苜蓿种子萌发期耐盐性鉴定指标。对四个紫花苜蓿品种的发芽率、幼苗苗高、幼根生长量、耐盐半致死浓度四个指标进行综合分析,结果表明:中苜1号耐盐性最强,其次是中苜3号和中草3号,陇东苜蓿最弱。     

小兴安岭天然林不同树种的树高曲线模型

选用10种树高曲线模型作为候选模型,以决定系数(R~2)、残差平方和(S_(se))和均方差(M_(se))作为模型优劣的评价指标,对小兴安岭天然林中的云杉(Picea asperata)、红松(Pinus koraiensis)、水曲柳(Fraxinus mandschurica)、椴树(Tilia tuan)4种树种的树高曲线模型进行优选。结果表明:云杉、红松和椴树的最优模型均为Logistic模型,水曲柳的最优模型为抛物线模型;云杉和红松两种针叶树种,最优模型的优势不明显,水曲柳和椴树两种阔叶树种最优模型的优势较明显;比较R~2的大小,得出较适合小兴安岭云杉和红松两种针叶树种的树高曲线模型(R~20.8),对小兴安岭阔叶树种的适用程度不具有普遍性,对椴树的适用性好(R~2最大达0.94),对水曲柳的适用性较差(R~20.8)。对水曲柳的树高进行分段研究得出:水曲柳在树高低于9 m时,树高曲线模型较适宜(R~20.8),其中抛物线模型为最优模型;树高较高时,没有适用的树高曲线模型。