镍－碳化硅复合电镀的研究

报道了瓦特型镍－碳化硅复合电沉积过程，研究了ＳｉＣ微粒的表面活性剂处理，粒子浓度阴极电流密度，搅拌和ｐＨ值等因素对镀层硬度和耐磨性的影响。结果表明，在最佳的工艺条件下，可制备出性能优良的复合镀层（９％～１０％ＳｉＣ含量）其硬度是纯Ｎｉ的４～５倍，耐磨性是纯Ｎｉ的５～６倍。     

高效预应力混凝土框架的试验研究

通过２榀预应力混凝土叠合框架１：３比例的模型试验，了解了叠合梁框架在竖向荷载作用下的受力性能。讨论了叠合梁截面应变分布特点，并分析了梁的配筋率这一主要参数对框架极限承载力和破坏形态的影响。     

Effect of a 1800 MHz electromagnetic field emitted during embryogenesis on chick development and hatchability

The level of artificial electromagnetic field (EMF) has steadily increased with the development of human civilization. The developing chicken embryo has been considered a good model to study the effects of EMF on living organisms. The aim of the study was to determine the effect of a 1800 MHz electromagnetic field during embryogenesis on the frequency of chick embryo malformations, morphometric parameters of the heart and liver and concentration of corticosterone in blood plasma, lipid and glycogen content in the liver of newly hatched chicks. A 1800 MHz EMF was found to shorten the duration of embryogenesis (earlier pipping and hatching of chicks) while having no effect on the quantity and quality of chicks and on increasing the incidence of embryo malformations. Exposure of chick embryos to EMF caused decreases in relative heart weight and right ventricle wall thickness. The pipping and hatching of chicks can be accelerated by stressful impact of EMF, which is confirmed by a significant increase in plasma corticosterone concentrations and decrease in fat and glycogen in the liver of chicks exposed during embryogenesis on the electromagnetic field with a frequency of 1800 MHz.     

绿色环保型循环冷却水处理技术

分析了当前绿色环保的循环冷却水的处理工艺、现状、机理和应用情况，指出了绿色环保型循环冷却水的重要性，以期引起业内的重视并提供参考。     

Time‐lapse monitoring of soil water content using electromagnetic conductivity imaging

The volumetric soil water content (θ) is fundamental to agriculture because its spatiotemporal variation in soil affects the growth of plants. Unfortunately, the universally accepted thermogravimetric method for estimating volumetric soil water content is very labour intensive and time‐consuming for use in field‐scale monitoring. Electromagnetic (EM) induction instruments have proven to be useful in mapping the spatiotemporal variation of θ. However, depth‐specific variation in θ, which is important for irrigation management, has been little explored. The objective of this study was to develop a relationship between θ and estimates of true electrical conductivity (σ) and to use this relationship to develop time‐lapse images of soil θ beneath a centre‐pivot irrigated alfalfa (Medicago sativa L.) crop in San Jacinto, California, USA. We first measured the bulk apparent electrical conductivity (EC_a – mS/m) using a DUALEM‐421 over a period of 12 days after an irrigation event (i.e. days 1, 2, 3, 4, 6, 8 and 12). We used EM4Soil to generate EM conductivity images (EMCIs). We used a physical model to estimate θ from σ, accounting for soil tortuosity and pore water salinity, with a cross‐validation RMSE of 0.04 cm³/cm³. Testing the scenario where no soil information is available, we used a three‐parameter exponential model to relate θ to σ and then to map θ along the transect on different days. The results allowed us to monitor the spatiotemporal variations of θ across the surveyed area, over the 12‐day period. In this regard, we were able to map the soil close to field capacity (0.27 cm³/cm³) and approaching permanent wilting point (0.03 cm³/cm³). The time‐lapse θ monitoring approach, developed using EMCI, has implications for soil and water use and management and will potentially allow farmers and consultants to identify inefficiencies in water application rates and use. It can also be used as a research tool to potentially assist precision irrigation practices and to test the efficacy of different methods of irrigation in terms of water delivery and efficiency in water use in near real time.     

吉安市两系杂交早稻株两优175晚春抛栽高产制种技术

从合理安排生产进程与选好播差期、抓好各个生育时期的技术措施2个方面总结了吉安市两系杂交早稻株两优175晚春抛栽高产制种技术,以供参考。     

Mapping soil salinity and pH across an estuarine and alluvial plain using electromagnetic and digital elevation model data

Increasing pressures from agriculture and urbanization have resulted in drainage of many floodplains along the eastern Australian coastline, which are underlain by sulphidic sediments, to lower water tables and reduce soil salinity. This leads to oxidation of the sediments with a rapid decline in pH and an increase in salinity. Accurately mapping soil salinity and pH in coastal acid sulphate soil (CASS) landscapes is therefore important. One required map is the extent of highly acidic (i.e. pH < 4.5) areas, so that the application of alkaline amendments (e.g. lime) to neutralize the acid produced can be specifically targeted to the variation in pH. One approach is to use digital soil mapping (DSM) using ancillary information, such as an EM38, digital elevation models (DEM – elevation) and trend surface parameters (east and north). We used an EM38 in the horizontal (EM38h) and vertical (EM38v) modes together with elevation data to develop multiple linear regressions (MLR) for predicting EC_1:5 and pH. For pH, best results were achieved when the EM38 EC_a data were log‐transformed. By comparing MLR models using REML analysis, we found that using all ancillary data was optimal for mapping EC_1:5, whereas the best predictors for pH were north, log‐EM38v and elevation. Using residual maximum likelihood (REML), the final EC_1:5 and pH maps produced were consistent with previously defined soil landscape units, particularly CASS. The DSM approach used is amenable for mapping saline soils and identifying areas requiring the application of lime to manage acidic soil conditions in CASS landscape.     

海绵体式复合植被毯及屋顶绿化技术

屋顶绿化是改善城市生态环境的重要途径,具有良好的生态和社会效益,但对建设投资方来说一次性投入增加较大,推广难度较大。为此,该文从海绵体式复合植被毯工艺与屋面施工流程等方面进行系统的介绍,突破传统的植被毯屋顶绿化形式,形成了一套造价低、维护简易,又有良好生态效益的海绵体式复合植被毯屋顶绿化形式。     

Current Status of DIMOX in Synthesizing Al/Al2O3 by Aluminum Alloy

The processes, microstructures, properties and mechanisms of DIMOX in synthesizing Al/Al 2O 3 by Al-Mg-Si alloy are reviewed and their problems are considered mainly as following:non_homogeneous oxidation growth of Al/Al 2O 3 at the surface of melts and the porosity of Al/Al 2O 3 limites structural application of Al/Al 2O 3 composite. The mechanisms and models of microchannel,magnesium action,silicon action,and induction are outlined. Several problems which need to be noticed are pointed out,which are diffusion and transfer of oxygen in aluminium melts;the role of MgO and MgAl 2O 4 at outer layer;the reaction feature of solid_gas in the oxidation microstructures of Al_Mg_Si alloy;SiO 2 induction mechanism of silicon and its correlation with the mechanism of magnesium action in Al_Mg_Si alloy.