镍－碳化硅复合电镀的研究

报道了瓦特型镍－碳化硅复合电沉积过程，研究了ＳｉＣ微粒的表面活性剂处理，粒子浓度阴极电流密度，搅拌和ｐＨ值等因素对镀层硬度和耐磨性的影响。结果表明，在最佳的工艺条件下，可制备出性能优良的复合镀层（９％～１０％ＳｉＣ含量）其硬度是纯Ｎｉ的４～５倍，耐磨性是纯Ｎｉ的５～６倍。     

Boundary-fitted grid in landscape modeling

Landscape modeling requires the delineation of system boundaries and interior features. Quite often, these components are complex and difficult to accurately represent. A rectangular grid is used to represent the study and adjacent non-study areas in most cases. When the non-study area occupies a large portion of the grid, computer memory is wasted, and computational time increases. An elliptical grid generator for non-orthogonal curvilinear coordinates is used to generate a boundary-fitted grid for a landscape model. In a boundary-fitted grid coordinate system, one coordinate axis follows the landscape domain boundary and is non-orthogonal to the second axis. The boundary-fitted grid uses elliptic partial differential equations to distribute grid points inside the landscape domain. Although the boundary-fitted grid follows the domain boundary, the grid pattern and point allocation remain structured. Thus, a landscape model can use a boundary-fitted grid without changing the model’s data structure or the computational scheme. In this study, a boundary-fitted grid and a raster-based grid were applied to the Everglades Landscape Fire Model. Use of the boundary-fitted grid decreased model simulation time by about one fifth and computer storage by 58% relative to the raster-based grid. Also, the linear characteristics of interior geographical features such as rivers and airboat trails were preserved by the boundary-fitted grid, but not by the raster-based grid. This preservation provided a more reasonable base map for simulating ecological processes, such as fire across heterogenous landscapes.     

电导法测定林木种子活力的研究

本文研究了林木种子电导法测定条件和测定电导率或相对电导率,通过回归分析建立电导率或相对电导率与种子活力指数的相关方程,找出了电导法测定林木种子活力的方法。     

三阶时滞泛函微分方程解的渐近性

本文讨论一类三阶时滞泛函微分方程解的渐近性质,给出了若干解的有界性及解趋于零的判定准则.     

高效预应力混凝土框架的试验研究

通过２榀预应力混凝土叠合框架１：３比例的模型试验，了解了叠合梁框架在竖向荷载作用下的受力性能。讨论了叠合梁截面应变分布特点，并分析了梁的配筋率这一主要参数对框架极限承载力和破坏形态的影响。     

二阶拟线性椭圓型Euler方程组解的Pohozaev型恒等式及其应用

本文对于二阶椭圆型Euler方程组 -∑D_αF_(q_α~i)(x,u,Du)+F_(ui)(x,u,Du)=0得到了一些积分恒等式,利用这些恒等式证明了某些方程组非平凡解的不存在性。     

河南省杨树材种出材率表的研编

用削度方程和单株带皮—去皮胸径的转换关系式两个模型对河南省杨树进行计算机理论造材．经精度检验，满足要求，方法可行，依此编制了河南省杨树材种出材率表。     

某类高阶非线性偏微分方程组弱解的正则性

本文研究一类2k阶非线性偏微分方程组之解的正则性,没有假定通常的椭圆性条件而只假定所谓"无穷远处"的椭圆性条件,证明了解的k-1阶导数为李普希兹连续的.     

以电导法配合Log istic方程确定茶梅‘小玫瑰’的抗寒性

 摘　要: 以不同处理时间、不同低温处理下茶梅‘小玫瑰’叶片的电解质外渗率(REC) 变化作曲线,并结合Logistic方程分别计算茶梅的半致死温度(LT50 ) , 结果发现在低温处理6 h以上, 茶梅叶片的REC均随着处理温度的降低而呈“S”形上升, 由此计算出“S”形拐点对应的温度即为茶梅叶片的LT50 , 其温度值在- 1215℃至- 14℃之间, 这可认为是茶梅抗寒能力的重要指标。关键词: