镍－碳化硅复合电镀的研究

报道了瓦特型镍－碳化硅复合电沉积过程，研究了ＳｉＣ微粒的表面活性剂处理，粒子浓度阴极电流密度，搅拌和ｐＨ值等因素对镀层硬度和耐磨性的影响。结果表明，在最佳的工艺条件下，可制备出性能优良的复合镀层（９％～１０％ＳｉＣ含量）其硬度是纯Ｎｉ的４～５倍，耐磨性是纯Ｎｉ的５～６倍。     

Effect of ruminal dosing of mechanical stimulating brush on rumination time, ruminal passage rate and rumen fermentation status in Holstein steers fed a concentrate diet

This experiment was conducted to determine the effect of ruminal dosing of a mechanical stimulating brush on rumination time, ruminal passage rate and rumen fermentation status in steers fed a concentrate diet at maintenance level. Animals were dosed three Rumen Faibu (RF) per head through the rumen fistulae (RF treatment) and not dosed (control) in a change‐over design. The organic cell wall content of the concentrate diet was 12.7% of dry matter. Daily time spent on rumination was very short in both treatments with 24 min in RF treatment and 15 min in control. The turnover rate of ruminal fluid in RF treatment was higher than that in control. There were no differences in ruminal pH and total volatile fatty acid concentration between RF treatment and control. Acetic and butyric acid concentrations were not different between the treatments. Propionic acid concentration tended to be higher in the animals on RF treatment than in control animals. The RF dosing in Holstein steers fed a low fiber diet did not affect the rumination time, but increased rumen digesta passage rate and ruminal propionic acid production.     

Development of a semi-selective medium and an immunofluorescence colony-staining procedure for the detection of Clavibacter michiganensis subsp. sepedonicus in cattle manure slurry

Various compounds and basal media were tested for their suitability to create a semi-selective medium for isolation ofClavibacter michiganensis subsp.sepedonicus (Cms) from cattle manure slurry containing c. 10⁸ colony forming units (cfu) per ml.Plating efficiency of Cms in yeast glucose mineral medium (YGM) was 104% compared with yeast peptone glucose medium. Nalidixic acid, polymyxin B sulphate and the experimental disinfectant S-0208 inhibited colony growth of cattle slurry bacteria as compared with Cms in YGM. The optimal concentration of these inhibitors in combination was determined by modified agar diffusion tests and by pour plating in 24-well tissue culture plates. The semi-selective medium YGMI consisted of YGM supplemented with nalidixic acid (2 mg/l), polymyxin B sulphate (30 mg/l) and S-0208 (125 mg/l). Plating efficiency varied for Cms between 50.9 and 69.6%, for cattle slurry bacteria between 1.8 and 2.5% and for saprophytes from potato heel end extracts between 11.5 and 27.4%.Differentiation of Cms colonies from other colonies was based on their small and bluish colony morphology in pour plates and on immunofluorescence colony-staining (IFC). IFC of a pure culture of micro colonies of Cms in YGM was possible after one day incubation (colonies c. 5 cells). Green background fluorescence in the agar gels was prevented by addition of Tween 20 (0.1%) to the washing buffer and the use of 1% agar gels. IFC of macro colonies of Cms in YGMI, visible with 4x objective magnification, was possible after 4 days. The detection level of the target organism in artificially inoculated cattle slurry in YGMI based on colony morphology varied between 1.4×10³ and 2.3×10⁴ cfu per ml of cattle slurry. Miniaturized plating combined with IFC, using wells in tissue culture plates (=16 mm), proved suitable for detection, but was c. 30 times les sensitive. The recovery of Cms was negatively correlated with the number of saprophytic colonies in the agar plates (R ²=0.74).     

两种血清抗性检测方法的比较分析

采用流式细胞术法对大肠杆菌的血清抗性进行检测,并与传统涂板法相比较,探讨流式细胞术在血清抗性检测方法中的应用。结果表明,两者呈正相关关系(P=0.0340.05),流式细胞术法可以代替涂板法对大肠杆菌的血清抗性进行检测。该方法可以减少由于涂板不均匀、人工计数等造成的误差,且易操作、计算少、耗时少,数据更准确。     

粉煤灰磁粉表面化学镀铜的研究

粉煤灰磁粉是热电厂生产过程产生的固体废弃物粉煤灰中的一种成分,由于其有内在的磁性和微导电性,通过表面金属化后,能用于制备电磁屏蔽和吸波材料。笔者采用置换反应法在粉煤灰空心磁粉表面进行了化学镀铜的研究。扫描电镜(SEM)和能谱(EDX)分析结果表明,该化学镀方法能在其表面获得良好性能的金属镀层。     

发动机曲轴的损伤及修复

介绍了发动机曲轴的运行环境,分析了发动机曲轴的损伤形式、损伤部位及特点,简述了曲轴技术状况的检查方法.针对发动机曲轴的损伤程度和不同的损伤类型,给出了修理尺寸法、堆焊、电弧喷涂、电刷镀和手工电弧焊修复工艺,并对堆焊和电刷镀修复工艺进行了详尽地介绍和分析.     

Maturation of the pancreatic and intestinal digestive functions in sea bass (Dicentrarchus labrax): effect of weaning with different protein sources

The maturation of the digestive functions in sea bass (Dicentrarchus labrax) larvae was evaluated by the enzymatic profile of pancreas and intestine brush border membranes. Sea bass larvae were weaned at day 25 with three simplified diets different by their protein nature: 100% fish meal (FP), 100% casein mixture (CP) and 50% fish meal-50% casein mixture (CFP). The casein mixture contained 35% of hydrolysate. The control group was fed live preys. The specific activity of amylase decreased with age irrespectively of the diets whereas the specific activity of trypsin was enhanced. The casein mixture reduced pancreatic secretion in amylase and trypsin. The CFP group differed from the other groups fed on compound diets, exhibiting as soon as day 32 high activities of brush border enzymes, similar to controls. This sharp increase between day 25 and 32 appeared to be crucial for larval survival. The addition of a protein hydrolysate in a weaning diet seems to facilitate this maturation process.     

盘刷式矮密栽培落地红枣集条装置研制

针对新疆落地红枣人工集条劳动强度大、机械化程度低的问题,研制一种与落地红枣捡拾机配套的红枣集条装置。重点设计避障系统和仿形机构等关键部件,确定盘刷、液压缸行程和仿形机构的工作参数,结合避障工况需求,设计扫盘避障液压系统并对液压元件进行计算选型。以盘刷转速、盘刷前倾角和前进速度为影响因素,集条率和破损率为评价指标,开展三因素三水平正交组合试验,结果表明：各因素对集条率影响显著性顺序为盘刷前倾角、前进速度、盘刷转速,各因素对破损率影响显著性顺序为盘刷转速、前进速度、盘刷前倾角;采用多元统计分析方法得出最优水平组合为前进速度08 m/s、盘刷转速200 r/min、盘刷前倾角15°,此时集条率为97.54%、破损率为1.11%;在最佳参数组合下进行田间验证试验,集条率为96.64%,破损率为1.13%,试验值与理论预测值相对误差分别为0.93%、1.77%,各项指标符合设计要求。     

化学镀镍单板的导电性和电磁屏蔽效能

为了实现单板的导电性和电磁屏蔽效能,对单板进行了化学镀镍研究,通过表面电阻率和电磁波网络分析仪测量方法对化学镀镍单板的导电性和电磁屏蔽效能进行了分析。结果表明：化学镀镍单板的导电性随着金属镍沉积量的增加而增加,但单板的导电性具有各向异性,平行于纤维方向的导电性要好于垂直于纤维方向的导电性。此外,这种各向异性在金属镍沉积量较少的情况下表现得更加明显,化学镀镍单板的电磁波屏蔽效能随着由于金属镍沉积量的增加而引起导电性的增加而增大,在本研究中化学镀镍单板的电磁波屏蔽效能可以达到30～60dB。     

割灌机安全性能抛射物体检测试验及其试验台设计

GB19725—2005《便携式割灌机和割草机安全要求》中，附录C抛物试验是GB／T14176—2003《便携式割灌机和割草机技术条件》3．6安全要求中重要的检测项目。根据抛射物体的形状和抛射物体试验的要求，开发设计了抛射物体试验台，以完善割灌机安全性能试验项目的检测。