Effect of Low Night Temperatures on Photosynthetic Activity of the Maize Seedlings (Zea mays L.)

Night chilling (5 °C) subsequently lowered photosynthetic intensity in the leaves of maize seedlings at 20 °C through an increase in leaf diffusive resistance brought on by lower tissue water content in morning hours. A more significant increase in leaf diffusion resistance was observed when soil temperature was lowered than in the case of lower air temperature.
The unfavorable effect of soil and air cooling temperature on photosynthesis was limited by air saturated with water vapour. However, as a result of lowering the night temperature from 5 °C to 1 °C, the efficiency of the protective influence of higher atmospheric humidity was decreased. This demonstrates that the participation of factors unrelated to plant water status in inhibiting photosynthesis increases with lower night temperatures.
An additional reason for inhibited photosynthesis following cool nights was a decrease in chlorophyll accumulation, below 50 μg per 1 cm² of leaf area.     

木材干燥导水系数和换水系数的研究

木材(板、方材)的导水系数和换水系数是反映木材干燥或存放过程中水分迁移的重要物性参数。然而,我国对木材导水系数和换水系数的研究和测定工作十分有限。木材干燥有关的理论计算中,常用原苏联的数据。由于这些数据本身可能存在的误差及用于我国树种的可靠程度难以估计,故使理论结果的实际运用受到限制。本文采用等厚试件系数分离法研究和测定了木材干燥过程动态导水系数和换水系数。     

水稻中系8541与中系8240光合特性的比较研究

本文通过光合作用参数的测定,详细的研究了中系8541和8240两种不同产量水平的水稻品种的光合特性.论述了在含等量叶绿素的条件下,中系8541和中系8240之间在对光谱的吸收、叶片的光合作用量子转化效率,叶绿体的PSⅡ(光系统Ⅱ)潜在活性(Fv/F_0)和原初光能转化效率(Fv/Fm等的主要区别.实验结果说明,上述各光合作用参数中系8541都优于中系8240.不仅如此.在Mg~(2+)作用下,Fv/Fo和Fv/Fm比值的提高以及Mg~(2+)对两个光系统激发能分配的调节能力中系8541也强于中系8240.     

亚硫酸氢钠处理减轻低温对温州蜜柑光合作用的影响

 低温胁迫使温州蜜柑叶片的净光合速率(Pn)、光系统Ⅱ的光化学效率(Fv/Fm)及光合电子传递速率(ETR)下降，反映跨膜质子动力势的叶绿素毫秒延迟发光(ms-DIE)减弱，叶片中的ATP含量降低。低温胁迫前，用NaHSO₃ 5 mmol/L涂于叶片表面，可使处理植株叶片的Pn和Fv/Fm分别少下降了11.5%和11.6%，ETR和ATP含量几乎没有下降，ms-DLE的下降幅度减少。可见，在柑橘上施用NaHSO₃能够减轻短期低温对光合机构及光合作用的影响。     

水分条件对巴音布鲁克高寒湿地CO_2排放的影响

在新疆天山中部巴音布鲁克天鹅湖高寒湿地,以苔草(Carex tristachya)为主要建群种的样地为研究对象,利用英国PP-systems公司生产的便携式土壤呼吸测定系统(CIRAS-2-SRC)研究了不同地表水分条件对天鹅湖高寒湿地夏季土壤CO2排放的影响。结果表明,1)湿润区的生物量大于干燥区;干燥区土壤CO2排放高于湿润区,干燥区土壤CO2排放日变化曲线为单峰曲线,CO2排放最高点出现在当地14:00-16:00,最高值为1.185 0g CO2·m-2·h-1;湿润区土壤CO2排放日变化曲线为双峰曲线,两个峰值分别出现在12:00和16:00,最高值为1.024 0g CO2·m-2·h-1。2)不同水分条件下生物量中凋落物含量影响土壤CO2排放。土壤温度是CO2排放的主要限制因子,且地表干燥区CO2排放与土壤温度的相关性更显著(P0.01)。土壤湿度与CO2排放相关性不显著(P湿润区=0.997,P干燥区=0.409)。     

Research on Lead-time Compression of Inventory Integrating Remanufacturing and Manufacturing System for the IOT Environment

The lead time compression is the core of supply chain management with time competition and the powerful source of competitive advantage of supply chain.As an emerging technology,The Internet of things ...     

对我国LULUCF碳计量监测方法的探讨

围绕我国林业编制温室气体清单这一重要工作,介绍了IPCC关于LULUCF温室气体清单编制系列技术指南的技术要点和要求,阐明了我国林业温室气体清单编制工作的进展,提出了林业开展LULUCF碳监测工作未来面临的需求。同时,在分析美国、欧盟、加拿大等发达国家LULUCF温室气体清单编制做法和经验的基础上,提出了"在森林资源清查样地系统上构建"、"新布设LULUCF大样地系统"等2种开展LULUCF碳监测的思路,目的是为推动我国林业LULUCF碳监测达到国际先进水平提供建议。     

Mechanisation of organic fertiliser spreading,choice of fertiliser and crop residue management as solutions for maize environmental impact mitigation

The environmental impact of crop production is mainly related to fossil fuels consumption and to fertilisers application. Emissions arising from the spreading of organic and mineral fertilisers are important contributors for impact categories such as eutrophication and acidification. The choice of the fertilisers and of the spreading techniques as well as the crop residues management can deeply affect the environmental impact related to crop cultivation.In this study, seven scenarios describing fertilising schemes characterised by different organic and mineral fertilisers and by different mechanisation were compared. The aim is to evaluate, using the Life Cycle Assessment (LCA) method, how the environmental performances of grain maize production were affected by these different fertilisers schemes. The study was carried out considering a cradle to farm gate perspective and 1 t grain maize was selected as functional unit. Inventory data were collected on a farm located in Po Valley (Northern Italy) during year 2013 and were processed using the composite method recommended by the International Reference Life Cycle Data System (ILCD). The compared scenarios involved organic and mineral fertiliser distribution and were: pig slurry incorporation after >3 days after spreading (BS), fast pig slurry incorporation within 2 h from spreading (AS1), direct soil injection of pig slurry (AS2), pig slurry incorporation (after >3 days) with straw collection (AS3), digestate spreading instead of pig slurry (after >3 days) (AS4), only mineral fertilisers (i.e. urea and superphosphate) distribution (AS5) and only mineral fertilisers (i.e. calcium ammonium nitrate and superphosphate) distribution (AS6).The results were not univocal, since climate and soil conditions as well as physical and chemical fertiliser characteristics differently affected the environmental load, especially for particulate matter formation, terrestrial acidification and terrestrial eutrophication impact categories. AS1 and AS2 showed the most beneficial results for these impact categories (between ↙67% and ↙73% respect to worst scenario). AS6, on the opposite, showed the highest environmental impact for those impact categories mainly affected by energy and fossil fuel consumption (climate change, ozone depletion, human toxicity with carcinogenic effect, particulate matter, freshwater eutrophication, freshwater ecotoxicity and mineral, fossil and renewable resources depletion), categories on which AS3 and AS4 were the best solutions. AS3 was the most impacting for terrestrial acidification and eutrophicationA sensitivity analysis was carried out varying grain maize yield (mostly affected: marine eutrophication) and ammonia volatilisation losses due to organic fertilisers (mainly affected: terrestrial acidification and eutrophication).The achieved results can be useful for the development of ⬓spreading rules⬽ that drive the application of organic fertilisers in agricultural areas where there is an intense livestock activity.     

港口原油装船VOCs大气环境影响探讨

收集了原油装船VOCs的估算方法，认为原油装船时VOCs排放量为0.012％，VOCs浓度为0.1kg／m3。采用SCREEN3对其环境影响进行分了析，结果表明：下风向最大浓度出现在400m 处，浓度值7.99mg／m3，直到2700m处，浓度值才小于1mg／m3，直到10000m处，浓度值仍为0.14mg／m3，原油装船VOCs的大气环境影响较大。     

干燥器法与穿孔萃取法测定中密度纤维板甲醛释放量的相关性研究

分别采用GB 18580标准中的干燥器法和穿孔萃取法检测中密度纤维板的甲醛释放量，并根据两种方法检测出的结果分析其相关性。结果表明，两种检测方法呈显著线性相关。