排序方式: 共有60条查询结果,搜索用时 15 毫秒
1.
Dry heat parboiling is a unique paddy processing technique that has been scarcely exploited. Dry heat parboiling at high temperature for short time and low temperature for long time on physical and physicochemical properties of three rice varieties differing in amylose content were studied. Hardness of the kernels increased from 66.4 N, 68.8 N and 59.8 N in raw samples to 89.1 N, 86.9 N and 59.8 N in parboiled high amylose, low amylose and waxy rice samples respectively. Rapid migration and evaporation of water from severely heated kernels caused cavity formation at the centre. Irreversible damage of amylopectin structures to leachable fractions caused continuous rise of the pasting curve. Crystallinity was thereby reduced. Parboiled high amylose samples gave X-ray diffraction patterns with peaks characteristic of A, B and V-type starch crystallinity. Crystalline starch-lipid complexes were observed in low amylose and waxy rices. The significant increase in the amount of rapidly digestible starch from 56.7%, 61.7% and 66.6% in raw samples to 92.1%, 90.8% and 94.8% respectively in severely processed rice samples and subsequent reduction in resistant starch from 24.5%, 21.2% and 18.4% to 0.4%, 1.9% and 0.1% indicated possibilities for targeted food use of the dry heat parboiled samples. 相似文献
2.
贡嘎山海螺沟冰川退缩区土壤序列矿物组成变化 总被引:1,自引:1,他引:1
阐明土壤中矿物随时间变化的机制是理解矿物风化和土壤发育的基础。利用X射线衍射法对贡嘎山海螺沟冰川退缩区土壤矿物组成随成土作用时间变化进行了定量分析。结果表明,冰川退缩区成土母质的矿物组成同质性较高,以硅酸盐矿物为主(约90%),包括:斜长石(28.5%)、石英(24.5%)、黑云母、钾长石、普通辉石、角闪石、绿泥石、蛭石;并有少量碳酸盐矿物,如方解石(8%)、白云石(2.3%);以及磷酸盐矿物磷灰石(2.1%)。退缩区土壤的矿物组成总体呈新发育土壤特征,随着成土年龄的增加,方解石逐渐被风化成为草酸钙石,角闪石、黑云母、磷灰石和绿泥石含量逐渐降低,长英质矿物的相对含量有所增加。成土作用中矿物组成的变化受植被原生演替和土壤p H的影响,快速发育的植被导致土壤p H迅速降低,风化程度增强。 相似文献
3.
H本文以内蒙古鄂尔多斯地区常见树种小叶杨为试材,饱和蒸汽为传热介质,饱和蒸汽温度为160℃ (0.6MPa)、170℃ (0.8MPa)和180℃(1.0MPa),处理时间为1h、2h和3h对试材进行不同条件的热处理,通过X射线衍射仪研究和分析热处理温度、热处理时间对处理材结晶特性的影响,结果表明:处理材的相对结晶度随温度的升高和时间的延长而增大;当饱和蒸汽温度为180℃(1.0MPa)、时间为3h时,处理材的相对结晶度最高为68.51%,比对照组高24.35%. 相似文献
4.
Mohammed F. Aldawsari Mohammed Muqtader Ahmed Farhat Fatima Md. Khalid Anwer Prakash Katakam Abdullah Khan 《Marine drugs》2021,19(8)
The objective of this work was to develop sustained-release Ca-alginate beads of apigenin using sodium alginate, a natural polysaccharide. Six batches were prepared by applying the ionotropic gelation technique, wherein calcium chloride was used as a crosslinking agent. The beads were evaluated for particle size, drug loading, percentage yield, and in vitro drug release. Particle size was found to decrease, and drug entrapment efficiency was enhanced with an increase in the polymer concentration. The dissolution study showed sustained drug release from the apigenin-loaded alginate beads with an increase in the polymer proportion. Based on the dissolution profiles, BD6 formulation was optimized and characterized for FTIR, DSC, XRD, and SEM, results of which indicated successful development of apigenin-loaded Ca alginate beads. MTT assay demonstrated a potential anticancer effect against the breast cancer MCF-7 cell lines. The antimicrobial activity exhibited effective inhibition in the bacterial and fungal growth rate. The DPPH measurement revealed that the formulation had substantial antioxidant activity, with EC50 value slightly lowered compared to pure apigenin. A stability study demonstrated that the BD6 was stable with similar (f2) drug release profiles in harsh condition. In conclusion, alginate-based beads could be used for sustaining the drug release of poorly water-soluble apigenin while also improving in vitro antitumor, antimicrobial, and antioxidant activity. 相似文献
5.
6.
A comparative study on conventional and microwave-assisted liquefaction of corn stover has been carried out using ethylene glycol (EG) as liquefacient and sulfuric acid as catalyst. Microwave dramatically increased the liquefaction extent and rate compared to conventional heating. The liquefied products and residues in both methods have been investigated using gel permeation chromatography (GPC), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). The GPC results show that the molecular weight of liquefied products with conventional heating is significantly greater than those of microwave-assisted liquefaction. The FTIR spectra indicate that there are significant differences in the hydroxyl and carbonyl group contents in the liquefied products with the two methods. The residue from microwave-assisted liquefaction mainly consisted of mineral matter. Many granules appeared on the surface of microwave liquefied residue according to SEM observation. 相似文献
7.
[目的]为了探讨重庆地区紫色土母岩的矿物组成特性和差异性。[方法]对重庆地区主要紫色母岩进行了XRD分析。[结果]重庆地区主要紫色母岩的层状硅酸盐矿物组成种类相对一致,除沙溪庙组母岩中未检出绿泥石外,其余各母岩中层状硅酸盐矿物都为蛭石、绿泥石、伊利石、高岭石和云母;在不同种类紫色母岩中,各层状硅酸盐矿物相对含量存在0.05水平显著差异;各紫色母岩中,伊利石结晶度不存在显著差异。[结论]紫色母岩中的层状硅酸盐矿物的种类、相对含量以及伊利石结晶度随地理位置改变未发生明显的变化。 相似文献
8.
应用显微硬度、光学显微镜、X射线衍射、SEM及 AES等,分析与研究了大型铁路轴承(197 726)表面变质层的成分、组织与残余应力,发现变质层中硬度的变化与磨削热产生的相变及表层碳量下降有关,表面存在很大残余压应力,但分布不均匀。 相似文献
9.
10.
Crystallinity is an important property of woody materials; it responds to tree growth traits, structure, and chemical composition,
and has a significant effect on Young’s modulus, dimensional stability, density, and hardness, etc. The ability of near-infrared
(NIR) spectroscopy coupled with multivariate analysis to rapidly predict the crystallinity of slash pine (Pinus elliotii) plantation wood was investigated. The results showed that the NIR data could be correlated with the X-ray diffraction (XRD)-determined
crystallinity of slash pine wood by use of partial least squares (PLS) regression, producing excellent coefficients of determination,
r
2, and root mean square error of calibration, RMSEC. The use of either reduced spectral ranges or the selection of certain
wavelengths consistent with known chemical absorptions did not have any detrimental effect on the quality of PLS models allowing
the use of inexpensive, small, and portable spectrometers. These studies show that NIR spectroscopy can be used to rapidly
predict the crystallinity of slash pine wood. 相似文献