插装阀阀芯优化与仿真分析

插装阀在静止状态下，由于静摩擦的原因，导致阀芯与阀套出现卡滞现象；在运动状态下，由于压差和阀芯微偏移的原因造成阀芯与阀套发生磨损；为此提出一种新型的带有导流槽的插装阀阀芯。基于缝隙流动和液压卡紧分析，建立插装阀阀芯与阀套间隙的CFD优化仿真模型，通过N-S方程、伯努利方程和卡紧力方程联立得到阀芯与阀套间卡紧力的推导公式。基于CFD仿真模拟分析，比较新型阀芯与原阀芯不同模型间隙的切线应力、压力分布规律，结果表明：在入口压力为12 MPa时，原阀芯的切线应力在12 000 Pa上下波动，大于新型阀芯切线应力4 200 Pa；在入口压力为8 MPa时，原阀芯的切线应力在7 200 Pa上下波动，大于新型阀芯切线应力3 000 Pa；且原阀芯切线应力的波动范围远大于新型阀芯。新型阀芯在阀套间的受力更加平稳，磨损更小。研究结果为插装阀优化以及减少能量损失和改善润滑条件提供理论指导和依据。     

Influence of soil phosphorus status,texture, pH and metal content on the efficacy of amendments to pig slurry in reducing phosphorus losses

Cost‐effective strategies for using chemically amended organic fertilizers need to be developed to minimize nutrient losses in surface and groundwater. Coupling specific soil physical and chemical characteristics with amendment type could increase their effectiveness. This study investigated how water‐extractable phosphorus (P) was affected by chemical amendments added to pig slurry and how this effect varied with soil properties. A 3‐month incubation study was conducted on 18 different mineral soils, stored at 10 °C and 75% humidity and treated with unamended and amended slurry which was incorporated at a rate equivalent to 19 kg total P (TP )/ha. The amendments examined were commercial‐grade liquid alum, applied at a rate of 0.88:1 [Al:TP ], and commercial‐grade liquid poly‐aluminium chloride (PAC ), applied at a rate of 0.72:1 [Al:TP ]. These amendments were previously identified by the authors as being effective in reducing incidental losses of P. The efficacy of the amendments varied with the soil test P, the degree of P saturation (DPS ) and the Mehlich aluminium, iron and calcium, but not soil texture. Chemical amendments were most effective in soils with DPS over approximately 20%. Due to their high cost, the incorporation of amendments into existing management practices can only be justified as part of a holistic management plan where soils have high DPS .     

浅谈几种概率分布之间的相互关系

本文简述了几种常用的概率分布之间的相互关系     

木材干燥导水系数和换水系数的研究

木材(板、方材)的导水系数和换水系数是反映木材干燥或存放过程中水分迁移的重要物性参数。然而,我国对木材导水系数和换水系数的研究和测定工作十分有限。木材干燥有关的理论计算中,常用原苏联的数据。由于这些数据本身可能存在的误差及用于我国树种的可靠程度难以估计,故使理论结果的实际运用受到限制。本文采用等厚试件系数分离法研究和测定了木材干燥过程动态导水系数和换水系数。     

表面技术在内燃机气缸套中的新进展

论述了气缸套的失效机理，针对这一缺点，较全面地阐述了当前表面技术在气缸套上的应用现状，并提出了未来气缸套的发展方向。为同行提供了参考和启迪，也为拓宽热喷涂技术的应用指明了一个方向。     

TheEstimationofStemTaperCurvefromtheRadialInformationatThreeLocationsontheStem

该文探讨了不用编制削度表直接建立高精度立木干曲线的方法．当采用干曲线是３次多项式时，通常根据１０分法测定树干各部位直径，用最小二乘法求出该方程式的参数．从数学角度，只要知道树干任意３个部位的直径，就可以用最小二乘法或联立方程式求解干曲线参数．本文以樟子松为例，探讨用树干哪３个部位直径拟合的干曲线最接近实际干曲线，为建立立木干曲线提供有效方法．利用９个部位半径（方法Ⅰ）和利用其中３个部位半径（方法Ⅱ，２８种组合）分别拟合干曲线，结果表明方法Ⅱ的６种半径组合的精度良好，其中的３种组合，（ｒ１．３，ｒ０．３，ｒ０．７），（ｒ１．３，ｒ０．４，ｒ０．７）和（ｒ１．３，ｒ０．４，ｒ０．８）是拟合现实干曲线的有效方法．     

平潭县燕下埔沙荒风口综合治理试验初报

对燕下埔沙荒风口地段的综合治理试验结果表明：风口造林要取得成功，除了要采取必要的生物措施，更为重要的是应设置具有一定疏透度的风障以降低风沙危害，提高造林成活率。     

CHANGE OF SURFACE CHARACTERISTICS DURINGOXYGEN BLEACHING OF SULPHATE PULP

INTRODUCTIONAtpresent,oxygenbleachinghasbecomeanlndustrializedtechnolOgy.Uptol989,thistechnologyhadbeenusedin58paPerndlls,and50%ofthemwereinEuroPe,20%inNorthemAmencaand20%inJapan.Inrecentyears,severaloxygnbleachiofequiPmenthadbeenintroducedintoChina.Inaword,oxygenbleachinglsasuccessfulandenviron-mentallyaccePtableprocessfOrPulpbleaching.However,littleworkhadbeendevotedtounderstandingthefundamentalaspectsofthissysten1,sotherewaslittledetailedinfOrmationonthel11echanismsofoxygenbleachi…     

松嫩平原羊草草地水淹干扰恢复过程的群落动态

根据随机取样的测定数据，经过幂函数和多元回归分析及相关检验，揭示了草地水淹干扰对羊草 寸草苔、羊草 杂类草群范数量性状的变化规律。水淹干扰对草地植被的物种组成及其比例有明显的影响。水淹后基本恢复到正常草地的种类数量和生产量配置大约需要6—7年。随着生境水分减少和土壤变干，羊草种群的数量和生物量均以幂函数形式增加，而寸草苔和杂类草的数量和生物量则呈先增后降的变化过程。     

对小麦F1代正反杂交组合的灰色关联度分析

运用灰色系统的理论和方法,对2002～2003年18个小麦F1代正反杂交组合的7个主要性状进行综合分析,计算其灰色关联度,分析正反杂交组合的差异,结果表明:200237品系最好,200212品系次之,200246品系最差.同时只有200237和200238、200213和200214品系的正反杂交组合表现为优良组合.