液压液用聚醚研究

Polyethers is one of the main components of water-glycol-base non-inflammble hydraulic fluid. This paper describes an optimized technique synthesizing polyether from ethylene oxide and epoxypropane. The synthetic polyethers meets the technical requirement     

Effect of the Silicic Acid Polymerization Degree on the Coagulating Property of Polyalumium Silicate Chloride

Polyaluminum silicate is a new type of inorganic macromolecular flocculants, which is developed as a complex product in recent years on the base of polyalumium flocculant and polysilicic acid flocculant. Sodium silicate is diluted to the concentration of 3.0% SiO 2 with distilled water. The solution was adjusted to pH 4.5 with sulphate acid and kept at quiescency for different time to get polysilicic acid with different polymerization degrees. Using polysilicic acid prepared and aluminium chloride as materials, a series of polyaluminium silicate chlorides(PASC) with different basicities(B), Al/Si molar ratios and polymerization degree of silicic acid are prepared by copolymerization technique. The Al-Ferron timed complex colorimetric method is applied to characterize species distribution of PASC and to study its influence factors. The interaction between hydrolyzed aluminum species and polysilicic acid with different polymerization degrees in PASC is discussed.The flocculant prepared is applied to the treatment of commercial concrete wastewater. The turbidity removal of commercial concrete wastewater is up to 97% when a PASC, prepared with polysilicic acid of 145 min polymerization degree.     

Dynamics of Actin Polymerization

The process of actin polymerization and depolymerization have some relation with its function,the activation of such process is compatible to its functions. The polymerization progress is divided into four steps: The first step is the activation of the monomer actin. The nucleation of actin nucleus forms in the second step which limits the polymerization speed. The elongation of the F-actin filaments happens in the following step. In the last step, a steady-state is attained, the length of the filament does not change because the polymerizing rate in the barbed end is the same with the depolymerizing rate in the pointed end. Some factors which affect the polymerizing process, such as nucleotide, actin related proteins are discussed. The aim is to know more about how to assemble the complicated system with biomacromolecule and what to function.     

论碾压混凝土坝上游面喷丙乳砂浆的防渗作用

碾压混凝土具有施工速度快，水泥用量少，投资省等明显的优点。国内的理论研究和工程实践都取得了突飞猛进的进展，在防渗问题方面也进行了卓有成效的探索，如福建省几座已建成的碾压混凝土坝均采用不同的防渗类型。文章结合福建省重点工程连江山仔水利枢纽工程碾压混凝土坝的施工情况，介绍了能够充分发挥碾压混凝土坝快速施工特点的悬臂钢模、改性混凝土的施工方法，论述了喷丙乳砂浆作为碾压混凝土坝上游主防渗体与这一施工特点相统一所具有的优越性。     

SPI凝胶颗粒制备及其Pickering高内相乳液特性研究

制备了大豆分离蛋白（Soy protein isolate,SPI）凝胶颗粒,并使用该颗粒制备了稳定的Pickering高内相乳液。通过粒径和ζ 电位测定、冷冻扫描电镜和光学显微镜观察以及外观分析,以流变特性为指标,对SPI凝胶颗粒和Pickering高内相乳液特性进行研究。结果表明,SPI凝胶颗粒的粒径和ζ 电位随pH值的变化而变化,当SPI凝胶颗粒pH值为4.0～5.0时,临近SPI等电点,ζ 电位的绝对值最小,此时凝胶颗粒相互聚集,不能成功制备稳定的高内相乳液。在pH值为 9.0时,大豆分离蛋白凝胶颗粒紧密结合在一起,呈凝胶网络状结构。在碱性条件下,蛋白质质量分数为1.00%、内相体积分数为78%～82%时,可以制备稳定的Pickering高内相乳液。通过增加内相体积分数,使大豆分离蛋白凝胶颗粒稳定的Pickering乳液体系分布更加均匀,不易发生聚集,形成更加致密稳定的多孔结构,且具有更强的弹性凝胶乳液特性。     

蒙脱土改性尿素醛肥料的制备及性能研究

[目的]研制氮缓释性能优异且制备工艺简单的缓控释肥料.[方法]采用溶液聚合法将具有纳米层状结构的蒙脱土(MMT)穿插在含有营养元素的聚合物缓释肥料尿素醛(UF)中,制备得到一种具有插层结构的新型生物降解高分子缓控释肥料.采用FTIR、XRD对制备肥料的结构进行表征,通过SEM观察肥料的表面形貌,研究原料配比对肥料加工性...     

注射含HCG和CPE的W／O／W复乳诱导日本鳗鲡性腺发育成熟的研究

用含HCG及鲤脑垂体（PG）匀浆液提取物（CPE）的W／O／W复乳，对塘养雌鳗进行注射催熟实验，雌鳗平均GSI达35．18％，最高达56．5％，其催熟效果较常规注射方法（平均GSI 27．9％，最高50．4％）好，用含LHRH－A，HCG，CPE的复乳和DOM生理盐水混悬剂对部分达到性成熟的鳗鲡进行催产，用W／O／W复乳诱导成熟的鳗鲡，排卵率为75％，用常规方法催熟的鳗鲡排卵率为55％，注射复乳制剂后，鳗鲡血清GtH含量可较长时间的保持较高水平，血清GtH的变化较常规注射方法缓和，注射乳剂还可使鳗鲡脑垂体GtH含量升高。     

花生乳状液体系中蛋白质的酶解动力学研究

采用碱性蛋白酶Alcalase 2.4L水解花生乳状液体系中蛋白质,研究了蛋白酶在乳状液体系中的水解特性。结果表明：蛋白质水解度随着初始酶浓度的增加而提高,在酶浓度一定的情况下水解度随着初始底物浓度的提高而降低。蛋白质水解度与乳状液的破乳率存在显著正相关(r=0.983)。在花生乳状液体系中Alcalase 2.4L的水解动力学参数Km=0.0698mol/L,Vmax=3.71×10-4mol/(min·L)。由实验数据推导出蛋白质酶解初级阶段的动力学方程,确定蛋白质水解和乳状液破乳的临界初始底物质量浓度为8.73g/L（加酶量为0.05%）。在酶和底物初始浓度以及反应时间确定的前提下,通过动力学方程可预测破乳过程中蛋白质的水解度及破乳率。     

20%高效氯氰菊酯水乳剂的配方研究

研制了一种环境友好型农药制剂——20%高效氯氰菊酯水乳剂。按照水乳剂性能指标进行测试,筛选了一系列乳化剂、助剂;采用反相乳化法的加料顺序,用高速剪切乳化法配制水乳剂。结果显示,20%高效氯氰菊酯水乳剂的最佳配方为高效氯氰菊酯原粉20%、复合溶剂2号10%、复合乳化剂8号8%、助剂6%、去离子水加至100%,用该配方所制备的20%高效氯氰菊酯水乳剂各项指标均符合GB/T1603—2001。     

Inhibition study of red rice polyphenols on pancreatic α-amylase activity by kinetic analysis and molecular docking

This study sought to investigate the possible inhibition mechanism of red rice polyphenols (RRP) on pancreatic α-amylase (PA) activity. RRP showed strong inhibition against PA activity and the half-inhibitory concentration (IC₅₀) value was 3.61 μg/mL. The fluorescence quenching of PA by RRP was a combination of static quenching and dynamic quenching. RRP could aggregate with PA and the physiochemical properties of the aggregates were closely related to the concentration of RRP. Kinetic analysis suggested that the inhibition mode of RRP on PA was reversible inhibition, which was a mixing of competitive inhibition and noncompetitive inhibition. Molecular docking speculated that RRP could form hydrogen bonds with PA by binding to the catalytic active sites (ASP197, GLU233 and ASP300) and the microenvironments of TRP58 and TRP59 were altered, thus inhibiting PA activity.