右江流域水生态补偿机制研究初探

为保护右江流域生态环境,协调郁江乃至珠江上下游各方经济利益,更好的激励上游地区生态环境保护行为,通过分析右江流域水生态现状、存在问题、现有生态补偿政策环境及其在郁江流域、珠江流域中的地位和作用,利用外部性理论,分析提出了右江流域水生态补偿模式。通过对标对表有关生态保护规划和区划成果,立足百色市实际,提出了右江流域水生态补偿内容、补偿主客体、补偿标准和补偿方式,初步构建右江流域水生态补偿机制框架,并提出有针对性的补偿政策建议,为水生态补偿实施提供了参考。     

蔬菜幼苗叶面积快速测定方法筛选与优化

为得到一种快速且准确测定蔬菜幼苗叶面积的方法,以番茄幼苗为试材,以方格法为对照,研究扫描分析法、叶面积仪法、打孔称重法测定叶面积的准确性、精确性与测定速度,然后采用黄瓜、辣椒叶片及纸片的面积对测定结果进行验证,最后基于不同扫描分辨率对筛选出的方法进行优化。结果表明,相比叶面积仪法和打孔称重法,扫描分析法测定结果更接近真实值,且精度更高,用时更短。扫描分析法不同分辨率下测定结果无显著差异,且扫描分辨率越低所需测定时间越短。扫描分辨率50 dpi下的扫描分析法可作为一种快速准确测定蔬菜幼苗叶面积的方法。     

Sporulation of Pyrenopeziza brassicae (light leaf spot) on oilseed rape (Brassica napus) leaves inoculated with ascospores or conidia at different temperatures and wetness durations

In controlled environment experiments, sporulation of Pyrenopeziza brassicae was observed on leaves of oilseed rape inoculated with ascospores or conidia at temperatures from 8 to 20°C at all leaf wetness durations from 6 to 72 h, except after 6 h leaf wetness duration at 8°C. The shortest times from inoculation to first observed sporulation ( l ₀), for both ascospore and conidial inoculum, were 11–12 days at 16°C after 48 h wetness duration. For both ascospore and conidial inoculum (48 h wetness duration), the number of conidia produced per cm² leaf area with sporulation was seven to eight times less at 20°C than at 8, 12 or 16°C. Values of Gompertz parameters c (maximum percentage leaf area with sporulation), r (maximum rate of increase in percentage leaf area with sporulation) and l ₃₇ (days from inoculation to 37% of maximum sporulation), estimated by fitting the equation to the observed data, were linearly related to values predicted by inserting temperature and wetness duration treatment values into existing equations. The observed data were fitted better by logistic equations than by Gompertz equations (which overestimated at low temperatures). For both ascospore and conidial inoculum, the latent period derived from the logistic equation (days from inoculation to 50% of maximum sporulation, l ₅₀) of P. brassicae was generally shortest at 16°C, and increased as temperature increased to 20°C or decreased to 8°C. Minimum numbers of spores needed to produce sporulation on leaves were ≈25 ascospores per leaf and ≈700 conidia per leaf, at 16°C after 48 h leaf wetness duration.     

滑菇优良品种筛选试验初报

本试验对 6个不同滑菇品种进行了菌丝体生长和制种观察 ;在栽培试验过程中进行了多点小试和中试 ,初选出Ph0 8号和Ph0 6号两个品种。Ph0 8的单盘产量比CK1高出 2 5 8% ,比CK2 高出 35 3% ;Ph0 6的单盘产量比CK1高出 2 1 5 % ,比CK2 高出 30 6 %。它们均属早生品种 ,适合辽宁地区的气候特点 ,在幼菇期菌盖呈半球形、桔红色、附着的粘液多 ,菌柄比对照短 ,菇体健壮 ,符合商品收购和产品加工的要求     

木耳漆酶高产菌株筛选及其发酵条件的研究

通过运用不同检测方法对木耳属中的三个种的 2 7个菌株的产过氧化物酶、漆酶能力的检测 ,筛选得到一漆酶高产菌株毛木耳 (Auriculariapolytricha)AP4。并且对AP4的产漆酶的发酵条件进行了初步研究。摇瓶实验产漆酶的最佳培养基的成分为 :碳源羧甲基纤维素(CMC) 5g/L ,氮源NH4NO3 L -天冬酰胺 (L -As paragine) 2 4mmol/L ,培养基的初始pH4 0 ,培养温度2 5℃。     

普通钢架大棚甜瓜嫁接砧木品种筛选试验

在普通钢架大棚内,以实生苗为对照,对引进的5个甜瓜砧木品种进行甜瓜嫁接比较试验。试验结果表明,5个砧木品种嫁接苗成活率均在90%以上,其植株和瓜的生长特性、产量和品质均没有显著差异,与实生苗之间亦无显著差异,综合性状表现较好的砧木品种为日本青秀和亮丽王。     

一种纤维素酶产生菌的筛选方法

[目的]获得一种简单高效的纤维素酶产生菌的筛选方法。[方法]基于扩散原理,采用滤纸条扩散试验筛选纤维素酶产生菌。[结果]获得2株纤维素酶产生菌菌株X1和X2。经DNS法检验,菌株X1的FPA酶和CMC酶活力分别为12.3和8.3 U,菌株X2的FPA酶和CMC酶活力分别为8.8和7.8 U。[结论]滤纸条扩散试验可作为一种便捷高效的筛选高质量纤维素酶产生菌的方法。     

黑皮冬瓜嫁接砧木的筛选与鉴定

挑选南瓜砧、蒲瓜砧和葫芦砧共10个品种,以佛山市三水黑皮冬瓜为接穗,采用斜顶插接法嫁接,露地栽培管理,比较其产量和农艺性状。试验结果表明,DZ-01冬瓜砧、京欣砧三号和强势作为三水黑皮冬瓜的嫁接砧木,可有效降低枯萎病发病率,增产10%以上,商品性状得到明显改善,商品品质差异不显著,推广应用性强。