Age estimation of different tree species using a special kind of an electrically recording resistance drill

The determination of tree age is an important issue for urban green planning, forestry and dendrology; finding non-destructive and quasi-non-destructive methods for this purpose is of great theoretical and practical importance. The resistance drilling method is quasi-non-destructive because the average diameter of an opening that remains after drilling does not exceed 3 mm. Do electrically recording resistance drills allow precise assessment of tree age? The aim of this study is to assess the accuracy of determining the number of tree rings based on an examination of this special kind of drilling resistance profiles for three tree species, the pine Pinus sylvestris L., the oak Quercus robur L., and the birch Betula pendula ROTH. In 2015 and 2016, 15 pine trees, 15 oak trees, and 15 birch trees were randomly selected. For each studied tree, a measurement was conducted using the electrically recording resistance drill IML-Resi E400 with a flat-tipped 1.5/3 mm steel needle (research sample), and an increment core was taken (reference sample). The drill used was not a real Resistograph^®. The analysis of the E400-profiles underestimated the number of tree rings; the mean bias error (MBE) values were –6.5, –2.5, and –6.0 years for pine, oak, and birch, respectively. The proportion of investigated trees with less than five years difference between the research and reference samples varied from 38.4 (birch) to 66.7 (oak) percent. The accuracy of tree age determination was lowest for birch and highest for oak. The binomial generalised linear model (GLM) revealed that the most accurate tree age assessments were obtained from tree rings wider than 2 mm. The measurements clearly showed that the electrically recording resistance drill IML-Resi E400 enables a quick, although approximate, tree age assessment. Future research should concentrate on electronically regulating and recording drills, providing a higher spatial and signal resolution, and a stronger correlation to wood density.     

耐盐抗旱优质高产棉花新品种‘衡棉1670’的选育研究

抗逆优质丰产棉花新品种的培育及应用是当前棉花生产节水提质增效的关键。‘衡棉1670’是河北省农林科学院旱作农业研究所以中早熟陆地棉品种资源材料‘衡棉210’为母本,以‘衡棉4号’为父本杂交,后代多年南繁北育,经旱棚盐池鉴定选择,在枯黄萎病混生重病地、不防治棉铃虫的高压胁迫下,经过多年连续定向选择育成。其突出表现为抗枯黄萎病、丰产优质、耐盐抗旱节水,适宜在河北省及黄河流域同类生态春播棉区推广种植,2019年8月通过河北省农作物品种审定委员会审定（审定编号为冀审棉20190013）。     

水稻条纹病毒在玉米和水稻上流行差异分析

为了明确水稻条纹病毒(RSV)在水稻和玉米上发生程度差异明显的原因,从一个侧面了解RSV流行本质,2004年在洪泽进行田间试验。采用黄盘诱集、盘扑、盘刮、肉眼计数等方法比较武育粳3号和掖单13上灰飞虱侵入和消长动态,结果表明两者均只有一个成虫侵入高峰,单位面积迁入虫量前者是后者的3.6倍,单株平均虫量相近。Dot-ELISA法测定灰飞虱带毒率为40%,成虫迁移扩散高峰期22d内两者接毒量约为每天百株137头带毒虫。武育粳3号有二代若虫发生,掖单13则无。逐日调查发病进程,结果显示水稻发病率为60%,玉米为0。室内抗性鉴定,掖单13对RSV的抗性比武育粳3号高4个级别。综合以上结果,寄主品种抗性决定了RSV在水稻和玉米上流行状况,二代若虫重复侵染是RSV在水稻上重发的另一主要原因。     

糖槭叶枯病发病规律及防治

糖槭叶枯病 Phyllosticta negundinis病菌孢子放散开始期和高峰期与每年的温、湿度变化有关。病害发生严重程度与降雨量关系密切 ,降雨早且量大时病害严重。病菌以分生孢子器和分生孢子在病叶上越冬 ,通过气流传播成为翌年初侵染源。喷洒 70 %甲基托布津可湿性粉剂 10 0 0倍液和 75%百菌清可湿性粉剂 80 0倍液均能收到较好的效果     

管道对接环焊缝裂纹的防治措施

针对甬沪宁进口原油管道工程开工初期对接环焊缝常出现裂纹的现象,结合射线检测和解剖结果,对裂纹产生的位置和断口特征进行了具体分析.通过对下向焊焊接工艺和焊口的受力分析,解析出其产生裂纹的原因,提出了相应的防止对策.     

准噶尔无叶豆水分生理生态学特性的初步研究

准噶尔无叶豆是我国荒漠的稀有植物,现已被列入国家重点保护的种类。通过对该植物水分生理生态学特性的初步研究得知:其同化枝水势变化幅度较大,日变化进程为双峰型;蒸腾作用不大,日变化表现为单峰型。蒸腾速率同植物表面温度,大气相对湿度及光照等生态因素有密切关系。经观测统计,在一定的温度范围内,均呈线性关系。     

一次防治大豆灰斑病籽粒灰斑

通过室内及田间大豆不同生育期接种试验证明，籽粒感染灰斑病的关键时期是Ｒ３－Ｒ５期．Ｒ２期以前侵染不造成籽粒斑驳，据此提出一次防治大豆籽粒灰斑病的关键时期为Ｒ２－Ｒ４期．     

月季抗白粉病资源的筛选

通过对月季11个品种的抗白粉病鉴定，筛选出5个免疫品种、1个高抗品种（HR）、2个中抗品种（MR）、3个高感品种（HS）。     

Morphological characterization of the interaction between Diplocarpon rosae and various rose species

Blackspot, caused by Diplocarpon rosae , is the most severe and ubiquitous disease of garden roses, but information is lacking about genotype-specific forms of resistance and susceptibility of the host. Macro- and microscopic analyses of 34 rose genotypes with a defined monoconidial culture black spot inoculum identified susceptible and resistant rose genotypes and further genotype-specific subdivisions, indicating the presence of partial forms of resistance and different resistance mechanisms. In total, eight interaction types were characterized, five representing compatible (types 1–5) and three representing incompatible interactions (types 6–8). The incompatible interactions were characterized by the lack of any visible fungal structures beneath the cuticle (type 8), single-cell necroses (type 7) or necroses of larger cell clusters (type 6), the latter two types with penetration hyphae and haustoria in epidermal cells.     

林木抗旱性生理指标及其在干旱区造林中应用研究

<正> 中国干旱半干旱区面积占全国面积的52.5%,半壁河山是以水分胁迫为主导限制因子的特殊生态区。为了提高这一地区的造林质量,选择旱生和抗旱性强的树种造林是主要造林技术之一。对于如何评价和比较林木的抗旱性,传统方法多采用对林木生态环境因子及对林木生