不同阶段猪用颗粒饲料物理性能的对比分析

对某饲料厂不同阶段猪用4种颗粒饲料的物理性能包括直径、长度、硬度、容重、含粉率和耐久性指数（Pellet Durability Index, PDI）等进行测定,对结果进行归类总结并采用统计学的方法参照有关标准进行分析。结果表明,4种颗粒饲料直径在2.87~3.94 mm之间,母猪料直径最大,小猪料最小,两两之间差异显著（P<0.05）,而且随着猪只年龄的增加,颗粒饲料的直径呈递增趋势。颗粒长度在8.62~11.94 mm之间,以大猪料最长,小猪料最短,长径比偏高。颗粒硬度在3.86~6.47 kg之间,以大猪料最大,小猪料最小,中小猪料显著低于大猪料和母猪料（P<0.05）,只有小猪料符合有关要求。颗粒容重在576.7~614.6 g/L之间,母猪料最大,小猪料最小,两两之间差异显著（P<0.05）,与直径呈相同的增减趋势。含粉率以小猪料最大,且只有小猪料与大猪料之间差异显著（P<0.05）。颗粒PDI以大猪料最大,小猪料最小,各阶段猪料的含粉率和PDI均符合有关要求。建议饲料厂家注重颗粒饲料物理性能指标的控制,调整饲料配方和工艺参数,不断改进颗粒饲料的质量。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

Comparison of the microbial communities of alpacas and sheep fed diets with three different ratios of corn stalk to concentrate

The objective of this study was to investigate the characteristics of ruminal microbial communities of alpacas (Lama pacos) and sheep (Ovis aries) fed three diets with varying ratios of roughage (corn stalk) to concentrate, 3:7 (LS), 5:5 (MS) and 7:3 (HS). Six alpacas (one-year-old and weighing 29.5 ± 7.1 kg) and six sheep (one-year-old and weighing 27.9 ± 2.7 kg) were used in this study, in a replicated 3 × 3 Latin square experiment. Total protozoa concentration was determined under the microscope; total fungi and methanogens were assessed using quantitative polymerase chain reaction and expressed as a percentage of total bacterial 16S rRNA gene copies; bacterial communities were investigated by targeted 16S rRNA gene (V3–V4 region) sequencing. The percentage of fungi was significantly higher in alpacas than in sheep under the LS diet, while the concentration of protozoa was significantly lower in alpacas under HS, MS and LS diets. The alpha diversity including Shannon, Chao l and ACE indices of bacterial communities was higher in alpacas than in sheep, under the LS diet. A total of 299 genera belonging to 22 phyla were observed in the forestomach of alpaca and sheep, with Bacteroidetes and Firmicutes dominating both animal species. Phyla Armatimonadetes and Fusobacteria, as well as 64 genera, were detected only in alpacas, whereas phyla Acidobacteria and Nitrospira, as well as 44 genera, were found only in sheep. The abundance of cellulolytic bacteria, including Butyrivibrio and Pseudobutyrivibrio, was higher in alpacas than in sheep under all three diets. These differences in the forestomach microbial communities partly explained why alpacas displayed a higher poor-quality roughage digestibility, and a lower methane production. Results also revealed that the adverse effects of high-concentrate diets (70%) were lesser in alpacas than in sheep.     

Establishing an eyeball-weight relationship for Litopenaeus vannamei using machine vision technology

This study aimed to establish a shrimp eyeball-weight relationship model for Litopenaeus vannamei using machine vision technology. A total of 295 shrimp were sampled from a recirculating aquaculture system (RAS). The long-axis length (d), body length (L), and body weight (W) of each individual was measured. The long axis length of the shrimp eyeball was identified and measured using machine vision technology. Continuous fitting and piecewise fitting models were used to construct the eyeball-weight relationship model for L. vannamei. The continuous fitting relationship model was described as: W = 38.865d^2.7914, while the piecewise model was described as: d < 2 mm, W = 0.0326d^3.7363, R² = 0.9288; 2 mm ≤ d < 3.9 mm, W = 0.0401d^3.104, R² = 0.9629; 3.9 mm ≤ d < 5.8 mm, W = 0.0421d^3.0311, R² = 0.9216; 5.8 mm < d, W = 0.103d^2.6226, R² = 0.9457. The root mean square error (RMSE) of the piecewise fitting model (0.0244, 0.1575, 0.5034, 0.7072) was smaller than the continuous fitting model (0.8229). The correlation coefficient (R²) of the piecewise model (0.9288, 0.9629, 0.9216, and 0.9457) was similar to that of the continuous fitting model (R² = 0.9621). The results indicated that the piecewise fitting model is suitable for calculating the biomass of L. vannamei in RAS and provides a novel way of estimating the biomass of L. vannamei cultured in RAS. The piecewise fitting model can also provide the foundation of evaluating the production of shrimp using underwater image recognition in intelligent aquaculture systems.     

Acclimation abilities of three tropical rainforest seedlings to an increase in light intensity

Current practices in many nurseries involve the germination of tropical rainforest seedlings in shaded conditions and transferral, at a later date, to environments with greater light intensities. Determination of the ability of these seedlings to acclimate to increased light intensities will allow seedling stock to be processed with maximum efficiency within the nursery. The acclimation abilities of three species, Agyrodendron actinophyllum, Cardwellia sublimis, and Flindersia brayleyana, commonly found in north Queensland's rainforests were investigated in this study. These particular species are highly valued for their cabinet timber qualities and are being reared in nurseries for use in reforestation trials and programs in north Queensland. Seedlings were initially raised in greenhouse conditions under two layers of shade cloth (16% of full sunlight) and then transferred into full sunlight at three different ages (3 weeks, 10 weeks, 14 weeks). Upon transfer, organ ratios and the direction of dry matter distribution was determined for each species and age group. Approximately 3 months after the seedlings were transferred, the acclimation ability of each species and age group was then determined. Dry matter distribution was found to change with age, irrespective of light environment. Individuals within a species with larger root systems and thicker or more dense leaves had a greater acclimation ability than those with smaller root systems and thinner or less dense leaves. Furthermore, individuals within a species whose dry matter distribution upon transfer was directed towards developing a large root system, and a small photosynthetic area and mass, had a greater acclimation ability than those whose dry matter distribution was directed away from such morphologies. Awareness of these relationships allows a better understanding of seedling response to gap formation in natural forests, and also allows plant nursery operators to make a more informed decision about when to move seedlings to environments with a higher light intensity.     

永城县土壤养分变化动态与培肥措施

对永城县1982年至1987年土壤养分变化动态进行了定点分析研究.共分析了三十个乡的257个土样。土壤有机质和氮素含量1987年比1982年相应提高25%和41.4%;而速效磷和钾则相应降低36.1%和89.9%;微量元素有效锌、硼、钼含量均属中低级水平。据此提出了相应的培肥措施.     

Physiological Basis of Irrigation Scheduling for Seed Production in Egyptian Clover Syn. Berseem (Trifolium alexandrinum L.) Crop

A field experiment was conducted to find out the critical physiological stages of irrigation schedules inducing better growth, physiological efficiency and seed yield potential of berseem ( Trifolium alexandrinum L., Var. S-99-1). For this purpose eight irrigation treatments were made comprised of four treatments of three irrigation (W₁, W₂, W₃ and W₄), three treatments of four irrigation (W₅, W₇ and W₈) and one treatment of five irrigation (W₆) at various physiological stages i. e. regeneration, flower initiation, full bloom, seed initiation and advance seed development stage.
Thus based on the experimental results the physiological role of watering in berseem seed production could be discussed as:
With-holding of irrigation either at regeneration or at full bloom stage developed potential water stress in plants as indicated by high proline content of irrigation treatments — W₄, W₁ and W₇; and further brought out disturbance on the formation of carotene, synthesis of water soluble sugar and translocation of sugar towards reproductive organs during grain development stage. These stresses adversely affected the plant growth and flowering behaviour. The irrigation at seed initiation stage increased the seed yield. Continuous irrigation did not appear to be useful. Thus it can be concluded that irrigation at three critical physiological stages i. e. regeneration, full bloom and seed initiation was found to be essential for obtaining potential seed yield of berseem.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

苎麻属野生种的光反应类型研究

对苎麻属11个野生种资源进行了10h、13h、16h光照处理，在不同光长条件下，表现出短光照生育期缩短、长光照生育期延长；短光照生育期延长、长光照生育期缩短；长、短光照生育期都延长；长、短光照生育期都缩短四个类型，并且不同光照时间对不同的生殖生长期有不同的影响，生长发育的积温差异较大。     

亚麻工艺长相关性状的通径分析

本试验以6个普通亚麻品种为材料,进行工艺长相关性状的通径分析。结果表明,5个相关性状对工艺长度影响大小顺序为:单株粒重>单株粒数>千粒重>株高>主茎分枝数。降低单株粒重是提高工艺长度的主要途径。在千粒重、单株粒重相对稳定的类型中,选择植株较高、单株粒数较多者,或在株高、单株粒数相对稳定的类型中,选择千粒重较高者是提高工艺长度的重要途径。减少主茎分枝数亦可有效提高工艺长度,但作用较小。