An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.     

Studies on Tomato Seedling Quality Indices Under Simulated Shipping and Storage Conditions

Indices of the tomato seedling quality maintenance level after production before field planting were studied through simulated experiments, small--scale operation, indoor analyses and measurements, and field observation. The results showed that under simulated shipping and storage conditions, seedling quality change following different durations (days) of shipping and storage was correlated significantly or even very significantly with certain physiological and morphological indices. With various measured indices following different periods of shipping and storage treatment subjected to multinomial successive regressive correlation analysis, the principal factors influencing seedling quality maintenance level are identified to be chlorophyll content→dry short weight→ leaf freshness index in order of their importance. Significance analysis with multinomial fitted equation indicated that correlations between any one of above three factors and the growth index after field planting reached very significant difference level.     

恩肥对平菇菌丝生长,产量及品质的影响

本文报道了恩肥的施用浓度、施用时期对平菇菌丝生长、产量和品质的影响。试验结果表明,施用恩肥可促进平菇菌丝生长和子实体发育,有利于提高产量及改善品质。用肥量为每1000ml PDA或每公斤干培养料0.2～0.3ml时,菌丝生长速度显著加快,长满袋的时间可缩短4～5d,子实体产量可提高45.7％～55.9％,蛋白质、必需氨基酸和非必需氨基酸分别增加25.8％、14.94％和11.32％。在不同施肥时期中,又以现蕾期喷施效果最佳。     

钾肥施用量对脐橙产量和品质的影响

１９９６～１９９９年连续４年在湖北省秭归县进行了脐橙钾肥施用量田间试验。结果表明，尽管各处理脐橙产量年度变化很大，但施钾显著提高产量和经济效益，１９９７～１９９９年施钾平均增产２６．３％～４１．８％，施钾（Ｋ２Ｏ）１２５、２５０、３７５ｋｇ／ｈｍ２年均增加纯利 １０１１０、１５８４０、９９７０元／ｈｍ２，产投比分别为 １９．３８、１５．４０和７．０４；在试验条件下施钾（Ｋ２Ｏ）２５０ｋｇ／ｈｍ２增产效果最好；施钾有提高脐橙外观品质和内在品质的趋势，例如施钾提高或保持单果重、增加果皮厚度、提高维生素Ｃ含量等；但施钾对品质的影响年度间差异较大，尚需进一步研究。     

蛋鸡低饲养标准饲粮配方的研究

为适应本地区当前生产需要,用低饲养标准饲粮配方,对莱杭鸡的生长与产蛋性能进行了比较试验。结果表明,在整个试验期内,补加鱼粉(1—5%)的试Ⅰ组,和含2种饼类(2—14%)的试Ⅱ组,在体重、料重比(试Ⅰ组—5.87,试Ⅱ组—6.07,对照6.66),产蛋量,料蛋比(试Ⅰ组—3.83,试Ⅱ组—3.88,对照—4.28)和盈利(元/只:试Ⅰ组—1.03,试Ⅱ组—1.23,对照—0.75)等方面较好:但因试Ⅰ组中鱼粉价高而盈利较低;加菜籽饼(2%)和豌豆粉(3—6.7%)的第Ⅲ组与选自生产配方中的对照组,在生产性能与效益方面较低,但仍可盈利,属于低标准、低效益配方,适于在饲养条件差和经营水平低的养鸡场、户采用。     

兴安落叶松育苗容器质地及规格的研究

1988～1990年通过一年生苗的高生长、地径与合理密度的观察。兴安落叶松育苗容器材料和规格的研究结果表明,纸容器的苗木无论在苗高、地径上与其它容器比较都具有显著性差异,容器规格选择φ3.8×12.5cm为宜,较理想密度为910株/m~2。     

果树技术经济效益评价的程序与方法研究

本文结合果树生产实际,阐述了果树生产技术经济效益评价研究的基本方法、基本程序步骤和各步骤实施的要求,对评价结果的分析方法进行了较为详细的说明。其中包括对比分析法、试算分析法、边际分析法在果树生产技术经济效益评价研究上的应用。同时本文对该课题中所涉及的几个果树技术的经济效益评价方法程序进行了各论。     

苎麻／涤Sirofil纱的性能研究

对苎麻/涤Sirofil纱的性能进行了研究，并与苎麻环锭纱、Siro纱、包芯纱、plyfil纱进行了比较。结果显示，苎麻/涤Sirofil纱的性能要优于对照纱。     

MapInfo在基准地价评估成果图中的应用实践

本文以MapInfo7.5作为GIS的平台软件,将MapInfo用于基准地价评估成果图的信息管理,利用创建、修改或更新的相关表格,建立相应的专题地图,使成果图中的信息更加直观明了。实践证明,MapInfo为基准地价评估成果图的及时更新、科学管理、有效利用提供了可靠的途经。     

千分尺测量结果不确定度的计算

以用千分尺测量长度为L=45mm的工件为例,阐述了千分尺的测量不确定度的来源及计算方法,并给出用千分尺测量该工件的测量结果。