抗青枯病花生种质资源的鉴定与筛选

为筛选适宜河南省信阳市种植的抗青枯病花生品种,对27份花生品种青枯病田间病圃进行鉴定,计算其发病率和病情指数,从而进行抗病性鉴定和筛选。结果表明,27个供试品种中,中高抗品种共10个占总数的37%,3个品种类型各筛选出2个抗病品种。6个抗病品种发病规律表明,7天和14天病情指数增长较快,21天后基本无变化。高油型花生‘远杂9102’和‘信花425’,高油酸型花生‘信花14号’和‘驻花11号’,普通型花生‘远杂21号’和‘豫花149号’为适宜信阳种植的抗病品种。     

以花生为主体作物的立体种植高效农业配置

以覆膜花生为优势布局的小麦     

罐顶对罐壁应力的影响

在大型油罐设计中采用线性理论的方法,分析论述了罐顶对罐壁是否产生影响这一问题。通过对拱顶油罐、浮顶油罐的罐壁边界条件、罐顶边界条件的分析计算,求出各层壁板挠度方程中的待定系数,便可得出其应力。从线性方程中,可看出影响罐壁应力的主要因素是挠度方程中的待定系数。待定系数除受储罐尺寸、液位高度的影响外,还受罐顶重量、罐顶剪力和弯矩的影响。以10万m~3浮顶油罐和拱顶油罐为例,进一步证明,液位是罐壁应力的控制因素,而罐顶重量、罐顶剪力和弯矩对罐壁应力的影响可以忽略不计。     

花生DNA导入大豆育种效果的研究

利用花粉管通道在大豆自花授粉后将花生ＤＮＡ导入栽培大豆受体中，引起受体的结荚习性、株高、成熟期，主茎节数、分枝数、产量性状和化学品质等性状的广泛变异。对变异株进行选择，获得了产量比受体提高１１．９％～２５．１％，蛋白质含量提高３．９％～５．３％的变异株系。实验结果表明：利用外源ＤＮＡ导入技术进行生态性状、产量性状和化学品质方向的育种是可能的。     

花生区组间杂种二代性状鉴定

花生区组四粒红与根茎区组Arachis glabrata杂交果针经离体培养克服了不亲和性,获得杂种。杂种二代性状出现疯狂分离,但有些性状仍分别倾向双亲。经叶片过氧化物同工酶分析,酶带的条数、宽窄、活性强弱及迁移率,杂种与双亲有明显差异,也有共同之处,初步证明了杂种的真实性。     

固支矩形底扁球壳的边界几何缺陷

In this paper, concept of boundary geometrical imperfection during postbuckling process for shallow spherical shell is first presented. The effects of the declination of the rectangular boundary on postbuckling process are also studied by integrated metho     

鸡蛋消毒方法的对比研究

采用5种消毒方法对鸡蛋蛋壳表面细菌进行杀菌效果试验,结果表明,各处理组之间抑菌效果差异显著(P＜0.05),杀菌效果优劣依次为开水浸烫＞甲醛熏蒸＞过氧乙酸熏蒸＞高锰酸钾浸泡＞过氧乙酸浸泡,开水浸烫操作技术难度较大,容易引起蛋壳破裂,适宜实际生产的消毒方法为过氧乙酸熏蒸和甲醛熏蒸.将消毒处理后的鸡蛋在温度25℃,相对湿度60%～80%贮存20天,开水浸烫处理组鸡蛋仍保持较鲜的品质,其余各组鸡蛋品质较差.结果表明,常规消毒方法(除开水浸烫法)只能抑制蛋壳表面微生物的生长繁殖,不能延缓鸡蛋品质下降达到保鲜鸡蛋的作用.     

Assessing exterior egg quality indicators using machine vision

ABSTRACT

1. The objective of this study was to develop a machine vision method for analysing exterior parameters of chicken eggs to automate the stage of primary sorting.

2. The developed algorithm based on predetermined thresholds calculated egg quality indicators, including geometric dimensions, shape index and the mottling grade. The algorithm was implemented with an experimental setup that combined the image-based and the candling methods. A total of 400 egg samples were analysed.

3. Comparison of results of the algorithm with those obtained using the traditional manual method showed that mean value of radii values difference was 0.095 ± 0.058 mm for the sharp and 0.080 ± 0.047 mm for the blunt end of the egg, with standard deviations of 0.58 mm and 0.49 mm, respectively.

4. The correlation coefficient between the shape index values determined by the two methods was 0.93; the standard deviation of absolute differences between corresponding values was 1.05%.

5. The results of mottling grade estimation were compared using F-measure and confusion matrix.

6. The results allow the possibility to perform the assessment of egg exterior quality factors in an automatic mode, independent of the expertise of a grader.     

花生抗黄曲霉相关基因PnLOX2的原核表达及RNAi载体的构建与转化

本研究对利用基因芯片技术从抗、感黄曲霉花生品种中分离出的差异表达基因PnLOX2进行原核表达,得到分子量为121.5 kD的融合表达产物;构建了PnLOX2基因的3'端反向重复结构并转化花生,得到了转基因花生苗,为反向鉴定PnLOX2基因在花生抗黄曲霉侵染过程中的功能奠定基础。     

花生黄曲霉生长预测模型的研究

通过对分离自花生的黄曲霉LYYSS03-3在不同温度(15-35℃)、不同相对湿度(水活度分别为0.5,0.7,0.9)下的菌落生长特性进行检测,采用Boltzmann和Logistic 模型对黄曲霉的生长曲线进行拟合,结果表明,在适宜温湿度阶段,花生黄曲霉的生长曲线更适合用Boltzmann模型拟合.