灵芝胞外多糖高产菌株筛选及其深层发酵培养基的优化

运用反馈抑制理论构建了耐灵芝胞外多糖 (EPS)反馈抑制的筛选模型。添加在筛选培养基中的其指示因子同源胞外多糖浓度为 2 .34g/L。将实验室保藏的 37株灵芝菌株输入该模型 ,即可检出耐灵芝胞外多糖反馈抑制作用最强、产胞外多糖能力最强的菌株GL0 2 9。然后在基础培养基的基础上用正交试验方法优化GL0 2 9深层发酵培养基。结果表明 ,组合碳源和组合氮源培养基最适合该菌株深层发酵生产灵芝胞外多糖。深层发酵培养基配方为 :蔗糖 10 g/L ,玉米粉15 g/L ,蛋白胨 2 g/L ,酵母膏 1g/L ,KCl 0 .5g/L ,KH2 PO4 ·7H2 O 0 .5 g/L ,pH自然。于 30℃、12 0r/min摇瓶培养 9d ,该菌株的胞外多糖产量高达 3.0 7g/L。     

响应面法对鱼肝油微胶囊化复合壁材的优化研究

[目的]优化鱼肝油进行微胶囊化的壁材用量。[方法]以天然鱼肝油为芯材,通过单因素试验研究乳清蛋白、β-环糊精、阿拉伯胶壁材对鱼肝油微胶囊化包埋率的影响,再结合中心组合响应面设计优化复合壁材用量,建立3种壁材用量与包埋率的数学模型。[结果]试验表明,在乳液浓度为25%时,鱼肝油微胶囊化3种壁材乳清蛋白、β-环糊精、阿拉伯胶的最佳使用比例为0.217、0.217、0.217,3种壁材比例为1∶1∶1。在此条件下,鱼肝油微粉的包埋率可达85.44%。[结论]研究可为鱼肝油的高效利用和产品开发提供技术支持。     

水地胡麻密肥高产栽培模型研究

在宁夏半干旱地区立地条件下,采用二次正交旋转组合回归设计,研究了种植密度和施肥水平对水地胡麻产量的影响。结果表明,参试的密肥因素对胡麻产量的作用由大到小依次为氮肥施用量、有机肥施用量、播种粒数、磷肥施用量,并通过模拟选优,确定了水地胡麻籽粒产量高于1 950.00 kg/hm2的优化农艺方案。     

响应曲面法优化气体射流冲击锥栗脱壳工艺

为了优化锥栗气体射流冲击脱壳工艺,采用响应曲面法分析了冲击温度（163～197C）、加热时间（109～311 s）及气流速度（6.68～9.73 m/s）对于脱壳锥栗品质（失水率、脱壳率、色泽L＊值）的影响,并建立了相应的预测模型.方差分析的结果表明：冲击温度、加热时间及气流速度对于失水率、脱壳率和色泽L＊值这三项指标都有着极为显著的影响.优化所得的较优工艺参数为：冲击温度1 79℃,加热时间278 s,气流速度7.83 m/s.对应的失水率、脱壳率及色泽L＊值的预测值分别为：4.14%、86.95%和58.65.经试验证明：应用响应曲面法所得到的脱壳工艺参数是可行的.     

小麦秸秆还田机粉碎装置性能影响因素试验与优化

利用设计的秸秆还田机粉碎装置进行了粉碎试验。以壳体包角、喂入速度、动定刀间隙为试验因素,秸秆的粉碎质量、粉碎功耗为试验指标,建立了粉碎质量和粉碎功耗的数学模型。随着喂入速度、壳体包角的增加和动定刀间隙的减小,粉碎功耗增大,粉碎质量提高。利用回归方程和主目标法,进行了参数的优化设计,结果为:粉碎室包角为70°、喂入速度为46.5m/s、动定刀间隙为10mm。     

A dynamic, optimal disease control model for foot-and-mouth disease: I. Model description

A dynamic optimization model was developed and used to evaluate alternative foot-and-mouth disease (FMD) control strategies. The model chose daily control strategies of depopulation and vaccination that minimized total regional cost for the entire epidemic duration, given disease dynamics and resource constraints. The disease dynamics and the impacts of control strategies on these dynamics were characterized in a set of difference equations; effects of movement restrictions on the disease dynamics were also considered. The model was applied to a three-county region in the Central Valley of California; the epidemic relationships were parameterized and validated using the information obtained from an FMD simulation model developed for the same region. The optimization model enables more efficient searches for desirable control strategies by considering all strategies simultaneously, providing the simulation model with optimization results to direct it in generating detailed predictions of potential FMD outbreaks.     

一般6R机器人的高精度逆运动学优化算法

为提高一般6R机器人逆运动学算法的精度和效率,提出一种基于符号运算和矩阵分解的优化算法。对6个基础逆运动学方程作变换,采用符号运算预处理得到14个逆运动学方程,避免大量浮点数计算累积误差。利用其中6个方程与关节变量3无关的特点,将目标矩阵从24阶降低到16阶,包含的关节变量从3个增加到4个。把一元16次方程求根问题转换为矩阵特征分解问题,并选取较高数量级的相关数据元素计算关节变量,进一步提高了算法精度。以一般6R机器人为例,求解结果表明,提出的算法能够得到具有任意期望精度的最多16组实数逆运动学解。     

高齿准双曲面齿轮的设计方法与试验研究

通过增加工作齿高和对根切条件的深入研究，提出了高齿准双曲面齿轮的优化设计方法。这种方法可以有效地增大端面重合度，并保证所设计的齿轮不根切、齿顶不变尖，可在现有机床上使用标准系列刀具加工。台架试验表明，这种高齿准双曲面齿轮的噪声和振动量比普通准双曲面齿轮明显降低。     

Determining crop-water production functions using yield–irrigation gradient algorithms

Crop-water production functions (CWPFs) are a useful tool for irrigation planning, but derivation of CWPFs by field experimentation is expensive, and traditional analytical techniques are not well suited to derivation of CWPFs. Physiologically based crop models provide a useful tool for simulation of agricultural experiments, but they have not been extensively applied to the task of CWPF determination. A new algorithm type based upon differential crop yield response to irrigation (“yield–irrigation gradients” [YIG]) is presented that uses these crop models to determine planning-level irrigation schedules and CWPFs. Three specific algorithms are developed within this type, varying in complexity, performance, and computational costs. Performance of the YIG methods is compared against a standard reference evapotranspiration method. In particular, the randomized iterative YIG (RIYIG) algorithm provides near-optimal results but at the highest computational costs of all the methods specified. All of the techniques presented have general applicability and are not limited to any one crop or location.     

灌区计算机监控系统与灌溉优化调度模型集成应用研究

大型灌区实施计算机监控是提高灌区管理水平的重要手段,灌区轮灌分组优化模型旨在求解干渠各出水口运行时调度的最优组合方案,而灌溉优化调度方案在实施过程中往往仍然采用的是计算机远程人工调度.为此研究了一种灌区轮灌分组优化模型,并得出了灌溉优化调度方案,同时采用OPC（即OLE for Process Control）技术,使灌溉优化调度方案数据与计算机控制系统有效地结合起来,提高了灌区灌溉管理自动化水平。