Acclimation abilities of three tropical rainforest seedlings to an increase in light intensity

Current practices in many nurseries involve the germination of tropical rainforest seedlings in shaded conditions and transferral, at a later date, to environments with greater light intensities. Determination of the ability of these seedlings to acclimate to increased light intensities will allow seedling stock to be processed with maximum efficiency within the nursery. The acclimation abilities of three species, Agyrodendron actinophyllum, Cardwellia sublimis, and Flindersia brayleyana, commonly found in north Queensland's rainforests were investigated in this study. These particular species are highly valued for their cabinet timber qualities and are being reared in nurseries for use in reforestation trials and programs in north Queensland. Seedlings were initially raised in greenhouse conditions under two layers of shade cloth (16% of full sunlight) and then transferred into full sunlight at three different ages (3 weeks, 10 weeks, 14 weeks). Upon transfer, organ ratios and the direction of dry matter distribution was determined for each species and age group. Approximately 3 months after the seedlings were transferred, the acclimation ability of each species and age group was then determined. Dry matter distribution was found to change with age, irrespective of light environment. Individuals within a species with larger root systems and thicker or more dense leaves had a greater acclimation ability than those with smaller root systems and thinner or less dense leaves. Furthermore, individuals within a species whose dry matter distribution upon transfer was directed towards developing a large root system, and a small photosynthetic area and mass, had a greater acclimation ability than those whose dry matter distribution was directed away from such morphologies. Awareness of these relationships allows a better understanding of seedling response to gap formation in natural forests, and also allows plant nursery operators to make a more informed decision about when to move seedlings to environments with a higher light intensity.     

卷边板件屈曲分析的半能量法

A semi-energy method to analyse the buckling behaviour of edge-stiffened plates under combined compression and bending is presented in this paper, One unloaded edge of the plate is restrained elastically against rotation and the other is stiffened by a st     

电机护环钢在硝酸盐溶液中应力腐蚀开裂的控制过程研究

本文在文献［１］基础上，运用金相，电化学方法研究了５０Ｍｎ１８Ｃｒ４电机护环钢依照ＱＨＪ－７９试验标准在硝酸盐介质中应力腐蚀开裂（即ＳＣＣ）的性质，结果指出，此体系中ＳＣＣ的控制过程为阳极溶解。     

哈尔滨市工农兵钢箱索梁桥模型试验研究

对哈尔滨市工农兵钢箱索梁桥的模型进行了试验和分析。结果表明,该桥设计采用的理论与试验结果基本相符,为桥梁的修复设计提供了可靠依据。     

超级稻“三定”栽培法研究Ⅲ．不同栽培方式对超级杂交稻产量形成的影响

超级杂交稻的优化(稀植、结构施肥)栽培试验于2002-2004年在长沙进行,以比较不同栽培方法对超级杂交稻产量及物质生产的影响。以两优培九为材料,并以汕优63作为对照。结果表明,两种栽培法,两个供试品种的产量表现不同,其中两优培九采用优化栽培单产为8.20～10.37t/hm2,比传统栽培增产显著。主要表现为有效穗多,而结实率、千粒重、穗实粒等产量因子差异不明显。汕优63采用优化栽培单产比传统栽培减产0.37%～8.8%。两种栽培方法间的茎蘖发生动态和单株分蘖数存在极显著差异,两组合单株分蘖数优化栽培比传统栽培分别多110.36%和110.64%,但由于移栽密度不同,两种栽培方式间的单位面积分蘖数没有明显差异。两优培九采用优化栽培的在各个生育时期,植株体内的含氮量比传统栽培的高。     

开口薄壁结构弯扭屈曲能量原理的有限变形理论分析

The formulas of the total potential energy of arbitrary thin- walled open cross section member counting in the geometric non-linear factors is deduced. The deductions are based on the most general finite deformation theory and the two assumptions that"the     

履带板用高锰钢强韧化研究

本文根据履带板的失效特征和机理,提出了高锰钢的铬、钼再合金化,稀土、钛变质处理和重结晶热处理工艺综合强韧化方案.经实验证实,综合机械性能显著改善.     

茭白主茎地上部养分积累和转运规律

以两个有代表性的茭白品种为试材,测定了植株主茎生育过程中地上各部位干、鲜质量的积累及叶片净光合速率的变化。结果表明在田间封行前,植株主茎叶和短缩茎的干、鲜质量持续缓慢增加;封行后至肉质茎快速膨大前,短缩茎的物质积累超过叶片和叶鞘;肉质茎快速膨大期间,干物质积累主要在其前期,同时短缩茎等其余部位干、鲜质量明显下降;之后肉质茎干、鲜质量增加趋缓,叶片、叶鞘质量仍持续下降,而短缩茎质量回升,进入新一轮物质积累期;主茎的总干物质量在封行后迅速提高,在肉质茎充分膨大后下降。功能叶片净光合速率在生育进程中总体呈持续缓慢下降的趋势,肉质茎快速膨大期间迅速大幅上升,紧接着又快速回落。     

黑木耳简单快速组织分离新法

利用酒精、镊子对黑木耳耳片进行组织分离,方法方便、快捷,分离成功率100%。     

轻钢结构抗震节能体系在“塞上农民新居”中的应用

针对宁夏地区农民传统住宅抗震性差，建筑外围护结构保温性能差，采暖系统能源消耗量大，环境污染严重等问题，提出采用轻钢结构配以轻质保温板材的轻钢结构抗震节能体系，以期为宁夏农村住宅设计提供指导性建议。