Stress parameters and immune response of layers under different cage floor and density conditions

The aim of the experiment was to investigate the effects of cage floor and cage density on stress parameters of laying hens. A total of 162 brown laying hens (Hyline Brown), aged 34 weeks, were used in the experiment. Compact-type battery cages, with three floors, were used. Hens were allocated as one, three or five hens in each of 18 cages to obtain three different cage density groups of 1968, 656 and 393.8 cm² floor area per hen, respectively. The same number of cages with different cage density were allocated to three different battery floors (first floor=top, second=middle, third=bottom) systematically. Values for body weight, mortality rate, egg weight, egg production, egg quality characteristics, egg yolk cholesterol content, the levels of blood plasma corticosterone, serum glucose, total cholesterol and triglycerides, the ratio of heterophils to lymphocytes (H-L ratio), antibody titers, claw length score, foot health score, plumage score and throat skin injuries were taken as indicators of stress. The values for egg weight (P<0.01) at the first floor were greater than the other floor levels. The group with five hens per cage had significantly lower mean estimates (P<0.01) than other groups with respects to body weight (P<0.001), egg production (P<0.001), egg weight (P<0.001) and plumage score (P<0.01), while significantly higher mean estimates for egg albumen index (P<0.01), Haugh unit (P<0.01), serum glucose (P<0.001), and H-L ratio (P<0.001). Serum cholesterol was higher in cages with one hen than that with five hens, whereas plasma corticosterone was lower. Antibody titers in cages with one hen was similar to that with three or five hens; however, those with three hens had higher titers than those with five hens. Values for egg breaking strength, yolk index, egg cholesterol content, and foot health score were not affected by cage density or floor. The results suggest that the allocation of three hens per cage had no measurable effect on health and welfare.     

复合微生物肥料在无公害蔬菜栽培上的效应初报

施用复合微生物肥料使番茄产量提高 7.3 %～ 11.1% ,可溶性固形物含量提高 0 .9%～ 1.3 % ,硝酸盐含量降低 2 7.2 %～ 3 4 .8% ;苦瓜产量提高 10 .7%～ 16.1% ,硝酸盐含量降低 2 8.7%～ 3 6.1% ;菜薹产量提高 7.2 %～ 15.1% ,硝酸盐含量降低 55.6%～ 61.5%。各处理产品中的硝酸盐含量及有害元素的含量 ,均符合无公害蔬菜产品质量标准要求     

涂饰工艺对木质体育地板表面滑动摩擦系数的影响研究

采用正交试验法,研究涂饰工艺对木质体育地板表面滑动摩擦系数的影响,试验因素为面漆涂饰次数、涂料种类和面板砂光目数,试验测试指标为表面滑动摩擦系数。方差分析结果表明,涂料种类与测试指标呈极为显著的影响关系,水性面漆涂饰的试件表面滑动摩擦系数相对较高;其他2个因素与测试指标之间无显著影响关系。砂光目数极可能对表面滑动摩擦系数有一定影响,但这一影响关系被底漆涂饰工艺所覆盖,因此所有试件的表面滑动摩擦系数全部达到了国家标准的要求。     

柴油机燃用复合乳化燃料放热率的计算模型

提出了适用于柴油、甲醇、水三元复合乳化燃料和柴油的热力学放热率计算模型，并利用此模型对直接喷射式2135G型柴油机进行了放热率计算研究，计算结果令人满意。同时分析研究了压力传感通道效率、计算步长；乳化燃料中水的化潜热及示功图光顺程度等因素对复合乳化燃料放热率计算精度的影响。     

多层组合减振结构参数优化的研究

对一种新型的，用于大型履带式车辆的多层管状减振结构的参数特性进行了研究。在分析了参数之间耦连关系后，提出了暂定刚度参数Ｙ和阻尼材料损耗因子β，先求剪切参数Ｘ的解耦观点。把减振结构的几何尺寸作为变量，结构的损耗因子η最大为目标，对结构进行了优化。经对按本文观点优化的橡胶减振器制品的动态实验，表明实验值与理论值有较好的吻合性。     

育肥猪舍用混凝土微缝地板的截面优化

为解决现有混凝土微缝地板因截面设计不尽合理产生的承载力富余过大,导致实际生产中板体自重大、生产和运输成本高等问题。该文通过计算假定、截面和荷载转化的方法,对混凝土微缝地板的结构进行了理论剖析,对其制造材料、板体尺寸、配筋等进行了优化和力学性能计算。在截面面积减少3600mm2、纵向钢筋面积减少213mm2、混凝土的标号由C30调至C25的情况下,单块地板的正截面抗弯值为3.14kN.m,斜截面抗剪值为3.56kN,裂缝宽度值为0.167mm,跨中截面挠度值为3.70mm,均可满足育肥猪安全使用要求。优化后,单块地板混凝土使用量可节省0.01m3,每平米地面铺设成本降低18%。     

发酵床垫料翻耙结合网床养殖改善鸭舍空气质量与鸭生产性能

为解决规模化肉鸭生产中粪污影响鸭健康和污染环境的问题,研发了一种发酵床结合网床架养新技术及其配套的可移动式网床下发酵床垫料翻耙系统,并研究了该模式在控制舍内气载微生物数量和提高鸭生产性能中的优势。结果显示:1)可移动式发酵床垫料翻耙系统实现不同发酵床体共用一台翻耙机。2)与发酵床平养相比,鸭26日龄之前未翻耙垫料时,发酵床网养舍内需氧菌总数(1.531×105 CFU/m3)和大肠杆菌数量(1.298×104 CFU/m3)显著升高(P0.05);鸭27~34日龄时每4 d翻耙垫料,发酵床网养舍内需氧菌总数(2.304×105 CFU/m3)和金黄色葡萄球菌数量(1.353×105 CFU/m3)显著降低(P0.05);鸭35~39日龄时每天翻耙垫料,发酵床网养舍内需氧菌总数(1.255×105 CFU/m3)和"沙门+志贺"氏菌数量(14.13 CFU/m3)显著降低(P0.05)。3)在发酵床平养舍内,与每4 d翻耙1次垫料相比,每天翻耙1次垫料舍内需氧菌总数(2.688×105 CFU/m3)、大肠杆菌(2.038×104 CFU/m3)、金黄色葡萄球菌(8.90×104 CFU/m3)和"沙门+志贺"氏菌(47.11 CFU/m3)数量显著(P0.05)降低,而在发酵床网养舍内,每天翻耙1次垫料舍内需氧菌总数(1.255×105 CFU/m3)和"沙门+志贺"氏菌(14.13 CFU/m3)数量显著降低(P0.05)。4)与发酵床平养相比,发酵床网养增加鸭体质量(P0.05),降低死亡率和上市淘汰率(P0.05)。结果表明研发的肉鸭养殖新模式能更好地减少舍内空气中病原菌浓度,改善鸭舍内空气环境,提高鸭生产性能。该研究为发酵床结合网床架养新模式在规模企业中推广应用提供技术支持。     

化学复合镀Ni-P-PTFE提高冷却液循环泵耐腐蚀性能的研究

简要讨论了化学复合镀的原理及特点，通过改进施镀工艺和配方，获得了镀层厚度可达45-60um，并且在耐腐蚀、耐磨性方面也有明显提高的复合镀层。结果表明，这种工艺对提高在腐蚀性环境中工作的泵、阀的使用寿命方面有良好的应用前景。     

黄糊精/秸秆纤维复合材料弯曲性能分

利用模压方法制备了黄糊精/秸秆纤维复合材料,并利用试验方法研究黄糊精/秸秆纤维复合材料的弯曲性能.研究结果表明:在试验条件下,通过对黄糊精/秸秆纤维复合材料弯曲强度和弯曲弹性模量的极差分析发现最优组合相同,即热压温度A=170℃、热压压力B=9.8 MPa、热压时间C=20 min、黄糊精质量D=30 g,并对最优组合进行了试验验证,得出其弯曲强度为15.34 MPa,弯曲弹性模量为2 522.78 MPa.通过对复合材料的弯曲强度和弯曲弹性模量的方差分析发现,热压时间是不显著因素,而热压压力是显著因素.     

A rapid extensigraph protocol for measuring dough viscoelasticity and mixing requirement

The extensigraph is particularly useful in characterizing dough viscoelastic properties; however, testing throughput for standard method is low due to the prerequisite for farinograph water absorption, long dough resting and milling to prepare large amounts of flour. Therefore, a rapid extensigraph method was developed that reduced sample size (165 g wheat) for milling and more than tripled throughput. Wheat is milled in Quadrumat Junior mill with a modified sieving system. The resulting flour (100 g) was mixed with a pin mixer at constant water absorption to allow the evaluation of wheat genotypes at the absorption level they are expected to perform. Dough was subsequently stretched by an extensigraph after 15 min of floor time and 30 min resting. Strong correlations for extensigram R_max (r > 0.93), extensibility (r > 0.64) and area (r > 0.88) were found for the proposed method compared to the standard method. Mixing parameters (time and energy) obtained during dough preparation provided further information about dough strength and mixing requirement. By significantly reducing sample size requirement and increasing testing throughput, this rapid extensigraph method can be widely adopted in milling and baking industry and meets the need for a fast evaluation of dough strength in breeding trials.