基于经济效益的农业新型经营主体小麦玉米全程机械化农机配备研究

因山东省旱作灌溉区种植模式多样、技术模式不统一，规模化生产下的机械效能未能充分发挥，存在动力机械与机具配套比低、农机动力与资金浪费问题，在对小麦玉米周年轮作下全程机械化技术模式调研后，总结小麦玉米全程机械化技术路线，构建以作业成本最小为目标的农机装备优化配备模型。通过对平度市某小麦玉米种植合作社进行计算，作业成本较实际情况下降10.9%；总动力优化配备结果为23.712 kW，下降51.36%；农机配套比提高50%。研究结果可为山东省旱作灌溉区小麦玉米全程机械化技术模式优选、农机农艺深度融合、农业合作社的农机配备等方面提供技术参考。     

土壤团聚体有机碳研究进展

土壤有机碳是衡量土壤肥力的重要指标,对于促进土壤养分循环、增加养分有效性有重要作用。土壤团聚体是土壤的重要组成部分,是组成土壤结构的最小单元,受到自然因素和人为因素的影响,其形成转化过程与土壤固碳过程息息相关,因而研究团聚体和有机碳的关系及团聚体有机碳影响因素对于土壤结构的改善和土壤质量的提升具有重要意义。本文通过对文献的总结,明晰了土壤团聚体和有机碳的关系,阐述了土壤类型、施肥方式、土地利用和矿区复垦对土壤团聚体有机碳的影响,并从生物质炭的长期定位研究和复垦矿区的土壤修复两方面对土壤团聚体有机碳的研究进行展望,研究结果可为合理的农业生产提供科学依据。     

小麦4B染色体上LOX基因的等位变异及其区域分布

为了解中国不同麦区小麦种质资源籽粒脂肪氧化酶（lipoxygenase,LOX）活性相关基因TaLox-B1的差异和分布,利用小麦4B染色体上的功能标记LOX16和LOX18对7个麦区的436份种质资源进行分子检测。结果表明：在供试材料中共检测到3种TaLox-B1基因等位变异类型,分别为TaLox-B1a（与高LOX活性相关)、TaLox-B1b（与低LOX活性相关）和杂合型,其频率分别为19.0％、70.4％和10.6％。小麦LOX活性基因不同变异类型在各生态区的分布存在明显差异：基因型TaLox-B1a在黄淮冬麦区、北部冬麦区和长江中下游冬麦区分布较多,其比例分别为21.1%、19.8%和17.6%;基因型TaLox-B1b在西南冬麦区和长江中下游冬麦区分布较多,比例分别为87.9%、72.5%;杂合型仅存在于北部冬麦区、黄淮冬麦区与长江中下游冬麦区,比例分别为14.2%、12.4%和9.8%。利用标记LOX16和LOX18对53个自选高代品系进行分子检测,发现自选品系仅有TaLox-B1b与杂合型两种基因型,其中基因型TaLox-B1ab有32个,比例为60.4%。采用分子标记辅助选择,有利于快速鉴定小麦籽粒LOX活性,加速LOX的遗传改良和新品种选育。     

不同施肥处理对马铃薯农田土壤理化性状及产量的影响

为了探究不同施肥处理对马铃薯农田土壤理化性状及产量的影响,试验地采用马铃薯连作模式,设置3个施肥处理,即：单施化肥(T)、有机肥配施化肥(YTF 1/2)、全量有机肥(YTF)。结果表明：在不同施肥处理下马铃薯农田土壤的理化性质和马铃薯产量发生了变化,其中变化最为明显的土壤指标有土壤容重、孔隙度、饱和导水率、有效磷。YTF处理较T处理可分别显著(P<0.05)降低土壤容重16.8%,增加土壤孔隙度12.7%,提升饱和导水率25.3%。YTF处理可显著提升土壤有效磷含量43.0%,但各处理间土壤pH、有机碳、全氮、全磷、碱解氮、速效钾之间差异并未达到显著水平。同时,较之T处理,YTF处理亦可显著提升土壤团聚体含量。YTF和YTF 1/2处理可分别较T处理提升马铃薯产量24.6%和12.8%。因此,施用有机肥不仅可以改善土壤结构,改良土壤物理性状,亦能促产增收。     

天津春稻和麦茬稻品质特性比较

以天津市培育的优质小站稻品种津川1号和隆优619为供试材料,分析了春稻和麦茬稻品质特性的差异。结果表明,津川1号作麦茬稻的整精米率明显低于作春稻,而垩白粒率显著高于春稻;津川1号麦茬稻的蛋白质含量明显偏高,食味值显著低于春稻;隆优619作春稻和麦茬稻无论在外观、加工、食味还是营养品质方面均无显著差异,是较理想的麦茬连作品种。     

Exogenous application of allelopathic water extracts helps improving tolerance against terminal heat and drought stresses in bread wheat (Triticum aestivum L. Em. Thell.)

The allelopathic water extracts (AWEs) may help improve the tolerance of crop plants against abiotic stresses owing to the presence of the secondary metabolites (i.e., allelochemicals). We conducted four independent experiments to evaluate the influence of exogenous application of AWEs (applied through seed priming or foliage spray) in improving the terminal heat and drought tolerance in bread wheat. In all the experiments, two wheat cultivars, viz. Mairaj‐2008 (drought and heat tolerant) and Faisalabad‐2008 (drought and heat sensitive), were raised in pots. Both wheat cultivars were raised under ambient conditions in the wire house till leaf boot stage (booting) by maintaining the pots at 75% water‐holding capacity (WHC). Then, managed drought and heat stresses were imposed by maintaining the pots at 35% WHC, or shifting the pots inside the glass canopies (at 75% WHC), at booting, anthesis and the grain filling stages. Drought stress reduced the grain yield of wheat by 39%–49%. Foliar application of AWEs improved the grain yield of wheat by 26%–31%, while seed priming with AWEs improved the grain yield by 18%–26%, respectively, than drought stress. Terminal heat stress reduced the grain yield of wheat by 38%. Seed priming with AWEs improved the grain yield by 21%–27%; while foliar application of AWEs improved the grain yield by 25%–29% than the heat stress treatment. In conclusion, the exogenous application of AWEs improved the stay green, accumulation of proline, soluble phenolics and glycine betaine, which helped to stabilize the biological membranes and improved the tolerance against terminal drought and heat stresses.     

Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

Determination of critical nitrogen dilution curve based on leaf area index for winter wheat in the Guanzhong Plain,Northwest China

Excessive use of nitrogen(N) fertilizers in agricultural systems increases the cost of production and risk of environmental pollution. Therefore, determination of optimum N requirements for plant growth is necessary. Previous studies mostly established critical N dilution curves based on aboveground dry matter(DM) or leaf dry matter(LDM) and stem dry matter(SDM), to diagnose the N nutrition status of the whole plant. As these methods are time consuming, we investigated the more rapidly determined leaf area index(LAI) method to establish the critical nitrogen(N_c) dilution curve, and the curve was used to diagnose plant N status for winter wheat in Guanzhong Plain in Northwest China. Field experiments were conducted using four N fertilization levels(0, 105, 210 and 315 kg ha-1) applied to six wheat cultivars in the 2013–2014 and 2014–2015 growing seasons. LAI, DM, plant N concentration(PNC) and grain yield were determined. Data points from four cultivars were used for establishing the N_c curve and data points from the remaining two cultivars were used for validating the curve. The N_c dilution curve was validated for N-limiting and non-N-limiting growth conditions and there was good agreement between estimated and observed values. The N nutrition index(NNI) ranged from 0.41 to 1.25 and the accumulated plant N deficit(N_(and)) ranged from 60.38 to –17.92 kg ha~(-1) during the growing season. The relative grain yield was significantly affected by NNI and was adequately described with a parabolic function. The N_c curve based on LAI can be adopted as an alternative and more rapid approach to diagnose plant N status to support N fertilization decisions during the vegetative growth of winter wheat in Guanzhong Plain in Northwest China.     

An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.