“藏粮于地”战略下高标准农田建设模式研究*

高标准农田建设是我国“藏粮于地”战略的重要抓手,是确保粮食产能的重要支撑。在梳理大量参考文献、政策文件和标准规范的基础上,针对现阶段高标准农田建设存在管理体制不完善、空间潜力不足、投资标准偏低、建设质量不高等问题,总结归纳高标准农田建设模式总体构架,通过对我国高标准农田建设综合评价结果排名靠前和提升较快的省份开展高标准农田建设模式调查研究,围绕管理体制、规划布局、建设标准、资金保障以及实施管理方面,提出系统构建高标准农田建设模式的对策建议,为提高高标准农田建设质量作有益参考。     

基于Netty的农业物联网服务器系统设计

为了方便对温室环境的监控和控制,使用Netty网络框架设计了一个农业物联网服务器系统,能够简化物联网服务器端的开发,实现下位机与上位机的实时通信。本文阐述了该系统的工作原理和总体设计,以期为实现大棚农作物生长的智能化和信息化管理。     

饲养系统和日粮对羔羊屠宰性能和肌肉矿物质含量的影响

文章旨在探讨不同饲养系统和日粮对羔羊生长、屠宰性能及肌肉矿物质含量的影响。试验将平均体重为（13.97±0.55）kg的120只羔羊随机分为3组，每组4个重复，每个重复10只。T1组在室内饲喂基础浓缩料，每天补充100 g稻草，T2组在室内饲喂基础浓缩料，每天补充100 g稻草和锌硒复合矿物质（0.2 mg/d硒，50 mg/d锌），T3组在室外放牧，除了采食苜蓿草外，每天额外补充100 g稻草和100 g燕麦。试验时间为9周。结果：T1和T2组羔羊的末重、日增重、半胴体重、下肢深度、下肢重量、眼肌面积、颈、胸肌、肾重量均显著高于T3组（P＜0.05），但骨盆骨重量显著低于T3组（P＜0.05）。各处理组羔羊的可食用部分和骨盆肌肉重量无显著差异（P＞0.05）。T2组63 d羔羊血液硒含量较T1和T3组分别显著提高了19.83%和25.0%（P＜0.05），血液锌含量较T1和T3组分别显著提高了31.71%和45.91%（P＜0.05）。T3组羔羊肌肉钙含量较T1和T2组分别显著提高了8.79%和5.37%（P＜0.05）。T2羔羊肌肉硒和锌含量较T1和T3组分别显著提高了41.18%、65.52%和38.19%、46.15%（P＜0.05），T2和T3组羔羊肌肉钾含量较T1组分别显著提高了3.27%和4.28%（P＜0.05）。结论：在本试验条件下，放牧羔羊胴体的脂肪含量低于室内饲养的羔羊，室外放牧可以提高肌肉钙和钾含量，但肌肉硒含量降低。 [关键词]饲养系统|羔羊|屠宰性能|矿物质     

茶树叶部害虫——茶橙瘿螨

茶橙瘿螨是茶树上一种常见害螨,以成螨、幼螨和若螨刺吸茶树汁液为害茶树,减弱树势,对茶叶产量和品质产生影响。文章介绍了茶橙瘿螨的分布与为害、形态特征、发生规律和防治措施,以期为生产上该害虫的正确识别和有效防治提供参考。     

我国黄瓜抗病品种选育技术研究进展

黄瓜在我国蔬菜产业中占有重要地位,然而连片种植、重茬栽培等条件下容易滋生病菌,尤其是随着我国保护地蔬菜生产规模的扩大,棚室内的温湿度条件更利于病害的发生与流行,黄瓜生产上面临着严重的病虫害威胁,包括生理性病害、感染性病害及虫害等。本文从抗病品种选育的角度分析了黄瓜病害抗病品种选育技术,并简要介绍了其他防治方法,展望了相关研究的发展方向,为黄瓜病虫害的防治提供参考。     

我国社会救助管理服务体系建设研究

我国社会救助体系不断完善的过程中涉及主体更多元、方式更多样。当前社会救助面临相关部门和组织多、信息复杂、经办分散、分类精准施救难度大等问题。基于我国社会救助模式的合理价值选择，提出管理服务体系建设的重要意义。进而分析社会救助在管理服务上面临的挑战和难题，从组织协调管理、信息网络系统、基层经办机构、社会参与机制四个方面提出构建多层次管理服务体系的思路。力求提高管理服务的效率和效能，促进互助共济社会救助共同体的形成，提升公众满意度，夯实我国民生保障基础。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

校园环境噪声监测与评价--以华中师范大学为例

环境噪声是环境质量评价的重要指标。通过噪声监测实验,记录了华中师范大学校园内的噪声污染数据,根据国家标准评估了校园环境噪声状况。试验采用网络剖分法,分别于昼间7:30~10:00和夜间22:00~22:55两个时间段对等效声级进行了测定。实验结果表明:昼间噪声污染更为严重,平均噪声超标率达到26%,夜间噪声污染相对较轻,但噪声超标率也达到19%。校园内不同功能区的噪声来源不同,工程施工产生的噪声是主要的污染源,影响比重达到58%。根据实验结果,校园声环境质量一般,需要对现状提出合理的改进建议。     

Vitrification of mouse two-cell and blastocyst stage embryos in simplified closed system using either a hemi-straw or a hollow fiber device

Two-cell stage and blastocyst stage mouse embryos were equilibrated in a medium containing 7.5% ethylene glycol (EG) and 7.5% dimethyl sulfoxide (DMSO) for 8–15 min. Vitrification was performed in a medium containing 0.5 M sucrose and either 15% EG + 15% DMSO, 17.5% EG + 17.5% DMSO, or 20% EG + 20% DMSO for 30 s. They were then placed either on a hemi-straw (HS) or a hollow fiber vitrification (HFV) device and vitrified by cooled air inside a 0.5-ml straw. In two-cell embryos, a 100% survival rate was obtained from all groups except the 20% HS group (P > .05). All vitrified two-cell groups showed similar rates of blastocyst development to that of fresh control group (P > .05), except 17.5% and 20% HFV groups, which were significantly lower than the other groups (P < .05). In the blastocyst embryos, the HFV groups were divided into two subgroups (non-collapsed; HFV-NC and collapsed; HFV-C blastocyst). Re-expansion rate in 15% HFV-NC, 17.5% HFV-NC, and 15% HFV-C groups was reduced (P < .05), whereas the rest were similar to control. In conclusion, we established a simplified, reliable, and closed system for HFV vitrification applying hemi-straw, which does not require skilled practitioners.     

Engineered-airlift pumps for aquaculture applications using multiphase flow analysis

Currently, very few aquaculture operations are employing airlift pump technology for water recirculation, aeration, and waste removal. This is likely due to the poor design and lower efficiency of traditional airlift design, the limited amount of research effort that has been invested in improving performance capabilities of air lift pumps and the general lack of awareness of the industry about the inherent advantages of airlift systems. A new efficient airlift pump is hydrodynamically designed by incorporating the Volume of Fluid (VOF) multi-phase model along with the K-ε turbulence model utilizing Computational Fluid Dynamics (CFD) tools. The pump is designed to offer a substantial reduction in total energy usage as well as an improved quality of the culture products in order to make it attractive to aquaculture industry. In this study, both numerical and experimental investigations were carried out for airlift systems operating under two different submergence ratios of 50% and 90% in a lab setting using 2.54 cm diameter pumps. Also, the performance of a large-scale pumps of 10.16 cm diameters were also tested in an aquaculture raceway to determine its effect on the operation. The numerical results were found to be in agreement with the experiments within ±20% which is considered very reasonable for multiphase flow analysis. The present study was found to present a great tool for modelling the airlift pump performance, and potentially proposing new designs.