Effect of Completion of Vernalization on Generative Development of Winter Rape (Brassica napus L. var. oleifera) Plants

Germinating seeds and young plants of winter rape var. Górczañski were vernalized for 56–63 days under conditions of 9-hour day, at the temperature 2 and 5 °C and in continuous darkness at the temperature 2 °C. After vernalization the plants grew under conditions enabling to complete vernalization: in a glass-house at the temperature day/night 15/10 °C and in semi natural conditions of open vegetation hall in the period from June till August. After sub-optimal vernalization further growth of the plants at lowered temperature increased its effectiveness (completion of vernalization). Depending on the degree of the vernalization of the plants the completion of their vernalization was both obligatory, i.e. conditioning the acquisition of the ability of generative development, and facultative i.e. accelerating this development. It has been demonstrated that the population of plants of the examined variety is strongly differentiated not only with respect of vernalization requirements in the particular plants, but also what regards the effectiveness of vernalization completion. New observations have been made indicating that the mechanisms controlling the successive phases of generative development, i.e. phase of forming flower buds and the flowering phase are not identical which may be interpreted as indicating that the "flowering factor" is polymorphous.     

Sporulation of Pyrenopeziza brassicae (light leaf spot) on oilseed rape (Brassica napus) leaves inoculated with ascospores or conidia at different temperatures and wetness durations

In controlled environment experiments, sporulation of Pyrenopeziza brassicae was observed on leaves of oilseed rape inoculated with ascospores or conidia at temperatures from 8 to 20°C at all leaf wetness durations from 6 to 72 h, except after 6 h leaf wetness duration at 8°C. The shortest times from inoculation to first observed sporulation ( l ₀), for both ascospore and conidial inoculum, were 11–12 days at 16°C after 48 h wetness duration. For both ascospore and conidial inoculum (48 h wetness duration), the number of conidia produced per cm² leaf area with sporulation was seven to eight times less at 20°C than at 8, 12 or 16°C. Values of Gompertz parameters c (maximum percentage leaf area with sporulation), r (maximum rate of increase in percentage leaf area with sporulation) and l ₃₇ (days from inoculation to 37% of maximum sporulation), estimated by fitting the equation to the observed data, were linearly related to values predicted by inserting temperature and wetness duration treatment values into existing equations. The observed data were fitted better by logistic equations than by Gompertz equations (which overestimated at low temperatures). For both ascospore and conidial inoculum, the latent period derived from the logistic equation (days from inoculation to 50% of maximum sporulation, l ₅₀) of P. brassicae was generally shortest at 16°C, and increased as temperature increased to 20°C or decreased to 8°C. Minimum numbers of spores needed to produce sporulation on leaves were ≈25 ascospores per leaf and ≈700 conidia per leaf, at 16°C after 48 h leaf wetness duration.     

油菜撒播轻型栽培技术研究Ⅵ.油菜撒播轻型栽培技术的大面积示范

2003~2005年度在贵州省安顺市西秀区七眼桥镇用油研7号、油研10号、油研8号等进行油菜撒播高产、高效的轻型配套栽培技术试验示范,面积分别为3.41 hm2和100 hm2,平均单产分别达164.1 kg/667m2和133.2 kg/667m2。其中,2004年验收的10块地(测量面积合计0.685 hm2)的撒播油菜平均产量为158.9 kg/667m2,最高产量达210~230 kg/667m2;2005年验收各类田块19块(面积合计1.159 hm2),单产105~206.3 kg/667m2。除去人工(每个工按15元计)、牛工(每个工按30元计)、物资投入外,667m2纯收入达189.57元,单个劳动力的产值达35.83元,比同地育苗移栽分别高131.11元/667m2和17.83元/个,比当地传统的苦油菜(芥菜型)撒播栽培增收175.72元/667m2。     

稻田免耕直播油菜出苗及杂草发生的研究

研究结果表明,浅耕油菜的出苗高峰期和出苗终止期分别为播后14d和播后49d,而免耕的分别为播后21d和播后63d,浅耕的出苗集中在播后7~21d,而免耕的出苗集中在播后14~28d。杂草发生量浅耕的比免耕的明显减少,杂草以看麦娘为主,发生量最大。     

我国油菜全程机械化现状与技术影响因素分析

从生产与需求、种植区域分布、品种特点和生产机械化等角度出发,概述了我国油菜生产现状,分析了油菜生产全程机械化等技术问题;根据品种特点、种植方式、收获工艺3个方面与机械化的关系,阐述了油菜全程机械化的技术影响因素,指出了推进我国油菜生产机械化的主要技术途径.通过研究分析可知:油菜全程机械化是一个复杂的系统工程,必须从品种培育、规范农艺技术、改进和开发机械装备等3方面协调地解决;必须针对各主产区品种特点、自然条件和经济条件,集成并融合单项技术,建立油菜机械化的区域技术模式和技术体系,系统地推进油菜机械化发展.     

不同复种油菜-轮作模式对马铃薯耗水特征及产量的影响

为探讨马铃薯不同轮作系统复种饲用油菜对马铃薯耗水特征及产量的影响,2017年在长期大田定位试验基础上选取4个处理,即马铃薯连作（CK）、马铃薯-小麦复种油菜-马铃薯（WPRP）、马铃薯-豌豆复种油菜-马铃薯（PPRP）、小麦-豌豆复种油菜-马铃薯（WPPR）,研究不同复种轮作模式对马铃薯耗水特性、水分利用效率和产量的影响。结果表明：马铃薯块茎增长期到收获期,CK 160~200 cm土壤水分含量和播前无差异,而WPRP、PPRP、WPPR 0~200 cm土壤各层含水量均大于播前,其中,块茎增长期到淀粉积累期,各层土壤平均含水量分别提高了43.02%、38.58%、24.63%,淀粉积累期到收获期,分别提高36.47%、33.63%和21.43%; 120~200 cm土壤各层含水量表现为：WPRP＞PPRP＞WPPR＞CK。WPRP、PPRP、WPPR耗水深度和贮水量均大于CK,其中,块茎增长期到淀粉积累期,耗水深度较CK分别增加42.86%、42.86%、42.86%,土壤贮水量较CK分别增加10.36%、12.91%和8.49%;淀粉积累期到收获期,耗水深度较CK分别增加了25.00%、12.50%、12.50%,土壤贮水量分别增加了12.56%、6.78%和2.95%,且WPRP贮水量较CK显著提高12.56%。块茎形成期、块茎增长期和淀粉积累期,WPRP耗水量较CK分别减少了16.2%、25.2%和5.1%。WPRP、PPRP、WPPR较CK产量分别增加33.51%、40.05%、14.47%,WUE分别提高54.83%、52.32%、19.78%。综上,马铃薯轮作系统复种油菜增加了降雨入渗深度、土壤贮水量和耗水深度,降低了阶段性耗水量,提高了马铃薯产量和WUE。且马铃薯-小麦复种油菜-马铃薯为该地区较佳的轮作模式。     

优质油菜施硫效应研究

试验表明,在土壤偏碱性,有效58.75mg/kg条件下,玉米作物施硫具有显著的增产、增值效果。施硫对提高单位面积有效穗数、平均穗籽粒数、千粒质量、叶色深度具有显著的影响,对生育时段影响较小,增产、增值效应随用量不同而异,增产9.33～26.83kg/667m~2,平均产量19.29kg/667m~2,增产率5.76%～16.59%,投产比10.17～4.32,合理用量为纯硫。2.00～4.00kg/667m~2,做底肥施用。     

基于WSN的油菜生长环境数据采集系统

针对传统作物生长环境数据获取手段实时性差、劳动强度大以及部署微型自动气象站和商用Zigbee产品成本高、开放性较差等问题，设计并实现了一种基于WSN的油菜生长环境数据采集系统。提出了轻量级的能量感知路由协议CLFP，并给出了软硬件的相关设计方法。仿真和大田试验结果表明，系统温度采集精度最高可达0.01 ℃，测湿精度达±5%，光强采集范围为1~65 535 lx，可并发的数据传输达到36路，可满足农业现场环境数据的较高测量要求。在标称电源供电情况下，系统实际有效生存周期超过142 d，由于采用AT89C51和nRF2401作为基础硬件平台，成本低廉，有助于大规模部署和应用。     

种植油菜对‘玉露香梨’坐果及果实品质的影响

为明确梨树行间种植油菜在改善梨果品质方面的作用,本试验比较了行间清耕和行间种植油菜处理下梨园土壤养分和访花昆虫情况,分析了梨果实坐果率、脱萼率及果实品质。结果表明,行间种植油菜较行间清耕处理显著提高了梨园土壤中速效磷和速效钾含量,增幅为36.6%和11.2%,此外可以增加昆虫特别是蜜蜂的访问量,减少金龟子的访问量;与行间清耕+自然授粉相比,行间种植油菜+自然授粉与人工授粉处理均可显著提高梨坐果率和脱萼率,增加果实重量和减小果实偏斜率;同时,行间种植油菜+自然授粉处理下梨果实可溶性固形物和总糖含量均最高,达13.83%和9.45%。行间种植油菜可以提高梨园土壤营养和授粉昆虫的数量,增加梨坐果和改善果实品质。     

施氮量和种植密度对中油杂11产量的影响

研究结果表明,随着栽培密度的增加,中油杂11冬前绿叶数、最大叶叶面积、有效分枝数、有效角果数、千粒重等呈下降趋势.该品种在中等肥力水平下的适宜种植密度为每公顷12万株.随着施氮量的增加,其有效分枝数、有效角果数、千粒重、产量呈先上升后下降的趋势,在种植密度为每公顷12万株、施氮量为150kg的条件下可获得最高产量.