土壤团聚体有机碳研究进展

土壤有机碳是衡量土壤肥力的重要指标,对于促进土壤养分循环、增加养分有效性有重要作用。土壤团聚体是土壤的重要组成部分,是组成土壤结构的最小单元,受到自然因素和人为因素的影响,其形成转化过程与土壤固碳过程息息相关,因而研究团聚体和有机碳的关系及团聚体有机碳影响因素对于土壤结构的改善和土壤质量的提升具有重要意义。本文通过对文献的总结,明晰了土壤团聚体和有机碳的关系,阐述了土壤类型、施肥方式、土地利用和矿区复垦对土壤团聚体有机碳的影响,并从生物质炭的长期定位研究和复垦矿区的土壤修复两方面对土壤团聚体有机碳的研究进行展望,研究结果可为合理的农业生产提供科学依据。     

马尾松叶表微生物多样性

为发掘对林木生长发育有利的优良微生物资源,并筛选适合叶表微生物的收集方法,以马尾松针叶为试验材料,分别用悬摇法和超声波法收集马尾松叶表微生物,用扩增子高通量测序技术、MUSCLE和Qiime软件研究马尾松叶表微生物的多样性。结果表明:扫描电镜观测结果显示,马尾松针叶表面定殖有大量微生物,包括真菌(菌丝及孢子)和细菌。扩增子高通量测序结果表明,马尾松叶表微生物物种丰富,包含细菌运算分类单位(OTUs)490个,真菌OTUs 1273个。马尾松叶表细菌以未分类的蓝细菌属(unidentified_Cyanobacteria)(36.53%)、未分类的拜叶林克氏菌属(unidentified_Beijerinckia)(28.60%)、鞘氨醇单胞菌属(Sphingomonas)(2.35%)为优势属;叶表真菌以枝孢属(Cladosporium)(2.45%)、拟盘多毛孢属(Pestalotiopsis)(0.92%)、无头孢菌属(Capnobotryella)(0.91%)为优势属。针对叶表细菌多样性的研究表明,悬摇法和超声波法均有较高的物种检出度;在叶表真菌多样性的研究中超声波法优于悬摇法,但超声波法样品间数据变异性较大,测定结果不稳定。     

数值模型结构不确定性对模拟结果的影响分析

以内蒙古鄂托克旗为例,基于GMS中的MODFLOW模块构建了地下水流数值模拟模型,分析了模型结构(含水层厚度、参数分区)与模型参数不确定性因素对模拟结果的影响.研究结果表明:含水层不确定情景(含水层下边界概化为隔水底板平均值870 m)与实际情况水头差值绝对值的累计和最大为701 m,对模拟结果起了主控作用;当含水层下边界概化为910,940 m时,累计和分别增加为1 013,1 593 m;与仅考虑单个不确定性因素相比,同时考虑模型参数与含水层不确定情景累计和最大为738 m,同时考虑参数分区与含水层不确定情景累计和最大为791 m.因此,在构建地下水流数值模拟模型时,应优先考虑含水层空间结构概化的合理程度,同时考虑多个不确定性因素对模拟结果的综合影响,使地下水数值模拟模型能更精确地反映真实的地下水流状况.     

黑果枸杞茎叶生长及其生态化学计量特征对灌水施肥的响应

在石羊河中游田间条件下,通过灌水和施肥调节黑果枸杞生长。测定不同时期黑果枸杞茎、叶生长量及其化学计量学特征变化,分析器官水平生长速率与化学计量学特征的关系,验证生态化学计量学理论"生长速率假说"。灌水施肥显著促进了茎长、基径和叶片长、宽及叶干重的生长(P<0.05),而茎长、基径、叶面积和叶干重的相对生长速率与对照之间无显著差异。各处理下黑果枸杞新梢C含量及C∶N、C∶P随生育期进程呈增加趋势,而N、P及N∶P呈降低趋势;灌水和施肥处理后茎C含量及C∶N、C∶P、N∶P低于对照,茎N、P含量高于对照。各处理叶片C、N、P含量在生育期内呈降低趋势,而C∶N、C∶P及N∶P呈增加趋势;灌水和施肥后叶片C含量及C∶N、C∶P、N∶P低于对照,叶片N、P含量高于对照。茎C含量及C∶N、C∶P显著高于叶片(P<0.05),而N、P含量及N∶P显著低于叶片(P<0.05)。生长速率假说认为,生物个体的生长速率与体内的N∶P、C∶P具有负相关关系,与N、P含量呈显著的正相关关系。各处理黑果枸杞茎、叶的生长速率与其N、P含量及C∶P、N∶P总体相关性不显著。表明施肥灌水调节下黑果枸杞茎叶生长及化学计量学特征不支持生长速率假说。     

Determination of critical nitrogen dilution curve based on leaf area index for winter wheat in the Guanzhong Plain,Northwest China

Excessive use of nitrogen(N) fertilizers in agricultural systems increases the cost of production and risk of environmental pollution. Therefore, determination of optimum N requirements for plant growth is necessary. Previous studies mostly established critical N dilution curves based on aboveground dry matter(DM) or leaf dry matter(LDM) and stem dry matter(SDM), to diagnose the N nutrition status of the whole plant. As these methods are time consuming, we investigated the more rapidly determined leaf area index(LAI) method to establish the critical nitrogen(N_c) dilution curve, and the curve was used to diagnose plant N status for winter wheat in Guanzhong Plain in Northwest China. Field experiments were conducted using four N fertilization levels(0, 105, 210 and 315 kg ha-1) applied to six wheat cultivars in the 2013–2014 and 2014–2015 growing seasons. LAI, DM, plant N concentration(PNC) and grain yield were determined. Data points from four cultivars were used for establishing the N_c curve and data points from the remaining two cultivars were used for validating the curve. The N_c dilution curve was validated for N-limiting and non-N-limiting growth conditions and there was good agreement between estimated and observed values. The N nutrition index(NNI) ranged from 0.41 to 1.25 and the accumulated plant N deficit(N_(and)) ranged from 60.38 to –17.92 kg ha~(-1) during the growing season. The relative grain yield was significantly affected by NNI and was adequately described with a parabolic function. The N_c curve based on LAI can be adopted as an alternative and more rapid approach to diagnose plant N status to support N fertilization decisions during the vegetative growth of winter wheat in Guanzhong Plain in Northwest China.     

Identification and quantification of anthocyanins in different coloured cultivars of ornamental kale (Brassica oleracea L. var. acephala DC)

Anthocyanins are responsible for the colour of many fruits, vegetables, flowers, and coloured-leaved trees. Ornamental kale (Brassica oleracea L. var. acephala DC) is widely cultivated for its colourful inner leaves. To investigate the relationship between the degree of colouration and anthocyanin distribution, content, and composition in ornamental kale, the authors studied the pigment characteristics of five cultivars with different coloured leaves (white, pink, red, purple, and purple-black). Microscopy observation, spectrophotometer, and high-performance liquid chromatography-mass spectrometry (HPLC-MS) analysis of fresh inner leaves revealed that pink, red, and purple colourations were associated with high levels of anthocyanin, while purple-black was the result of the combination of anthocyanins and chlorophyll. In the coloured cultivars, anthocyanins were abundant mainly in the first and second cell layers below the epidermis in both the hypocotyls and inner leaves. No anthocyanin was found in the white-leaved phenotype cultivar. Anthocyanin content increased as leaf colour deepened from pink, red, to purple cultivars, which had little chlorophyll and carotenoid. The authors identified eight anthocyanins in the four coloured cultivars, including one non-acylated, four monoacylated, and three diacylated cyanidin glycosides. Cyanidin-3-(sinapoyl)(feruloyl)-diglucoside-5-glucoside was the most abundant anthocyanin in the four coloured cultivars followed by cyanidin-3-(sinapoyl)-diglucoside-5-glucoside. The analysis of anthocyanin accumulation characterisation provides important information on evaluating colouration patterns in coloured plants, and will be helpful for breeding desired leaf colours in ornamental kale.     

菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。     

Detect unique molecular structure associated with physiochemical properties in CDC varieties of oat grain with unique nutrient traits [Feed Type vs. Milling Type] in comparison with barley grain using advanced molecular spectroscopy as a non-destructive biological tool

The objective of this study was to determinate grain unique protein inherent molecular structure that are related physiochemical and nutrient profiles in CDC developed oat varieties [CDC Nasser (Feed Type) and CDC Seabiscuit (Milling Type)] grown in cool climate condition in western Canada in comparison with conventional barley variety of CDC Meredith as a control using advanced molecular spectroscopy. Multivariate analyses, including an agglomerative hierarchical cluster analysis (CLA) and principal component analysis (PCA), were performed to identify protein molecular structural differences among the grains. The results revealed that CDC Seabiscuit contained greater (P < 0.05) protein structural Amide I and II than CDC Nasser and CDC Meredith, while the greater (P < 0.005) structural Amide I to II area and height ratios was detected in CDC Meredith. New oat grains had greater (P < 0.05) β-sheet height than barley grains, however, there was no difference in α-helix to β-sheet ratio values among the varieties. In conclusion, CDC Nasser and CDC Meredith had no difference in protein molecular structural features, while CDC Seabiscuit contains different protein structural characteristics as compared to CDC Meredith grain. The molecular structure features are highly associated with physiochemical and nutrient profiles in grains, which indicate that it also affect nutrient utilization and availability.     

An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.