Analysis of Heat Transfer and Optimal Parameters of Multi-louvered Fin Condenser

The authors conduct the experimental study and optimal computing for the condenser of automobile air conditioner. The especially the properties of heat transfer and flow at the side of air when using shutter fin. The authors the influence of several combinations of fin's geometry parameter to heat transfer and flow resistance. The maximal heat transfer is used as a criterion relation to select the fin's geometry parameters in the same facing air area of condenser. Furthermore, a program is designed to conduct optimal computing, and the computing results are basically consistent with experimental results. It shows that the optimal method is reasonable and the results can be applied to engineering practice.     

HJ-1卫星延寿期的CCD影像质量评价与可用性分析

HJ-1卫星发射升空投入运行以来,已在灾害与环境的快速监测与预报领域发挥了重要作用。HJ-1卫星目前已经成功运行3a多,属于超期服役状态。为了评价延寿期影像质量,该文从影像的几何校正精度、灰度特征和纹理特征3个方面对延寿期HJ-1A-CCD影像进行分析,并与正常寿命运行期的HJ-1ACCD影像、同时期的Landsat7 ETM+影像进行比较,分析结果表明:延寿期HJ-1A-CCD影像质量虽然有一定程度的下降,但其与正常寿命期影像质量接近,仍能较好地描述丰富的地物类型及地物细节信息,可以像正常寿命期影像一样,有效地用于环境监测、灾害监测、国土资源管理、城市规划、农业应用等方面。     

Drop size dependence of soil-water contact angle in relation to the droplet geometry and line tension

The soil-water contact angle is used as a measure of the surface hydrophobicity of soils. The contact angle for particular solid–liquid combination is considered to vary with the drop size. In this paper, we focused on examining the drop size dependence of contact angle on soil surfaces compared with homogeneous solid surfaces, and determining its relation to the droplet geometry and line tension. The contact angle estimated using geometric parameters of the droplets (θ _G) showed decreasing trend with increasing drop size from 5 to 50?µL irrespective of the deformations in the droplet shape in larger drops. This was considered to be a result of the corresponding deviations of the geometric parameters of the droplets. The directly measured contact angle (θ _A) first decreased and then increased with increasing drop size from 5 to 50?µL. The drop size at lowest θ _A for hydrophobized silica sand with 1?g?kg^–1 stearic acid (SA) and the acryl surfaces was 20?µL, whereas that for hydrophobized silica sand with 5?g?kg^–1 SA and siliconed paper was 30?µL. The decrease in θ _A with increasing drop size was explained as a result of the line tension effect using the modified Young's equation. Despite the surface heterogeneity, all the surfaces tested in this study showed positive line tensions on the order of 10?µJ?m^–1. Irrespective of the heterogeneity of the surfaces, the θ _A in this experiment agreed with the modified Young's equation for drop sizes up to about 20–30?µL, where the θ _A and θ _G were also in good agreement. Drop size dependence of contact angle was independent of the level of surface hydrophobicity. The θ _A on all the examined surfaces started to increase with increasing drop size when the deformation index, I _d, exceeded 5%, where the wetting radius, R exceeded the capillary length. The increase in θ _A with increasing drop size was attributed to the deformations of water drops due to the effect of gravity.     

基于微分几何与EDEM的船型开畦沟装置触土曲面优化

针对长江中下游地区油菜种植时土壤黏重板结、含水率波动大、播种作业需开畦沟避免渍害的农艺要求,考虑开沟犁体的触土曲面复杂、难以通过高速数字化土槽及田间试验方法寻求其减阻设计方法和理论依据的问题,采用微分几何理论并结合EDEM仿真方法,开展了驱动圆盘犁对置组合式耕整机开畦沟装置主要触土曲面结构优化研究。通过对主要触土曲面(开畦沟前犁犁体曲面、船式开沟犁整形曲面)牵引阻力分析和曲面参数分析,确定了触土曲面主要结构参数范围。根据微分几何理论,分别建立了能量化描述不同导曲线类型(直线、抛物线、指数曲线)犁体曲面形状变化差异的微分内蕴几何量E、L、M表达式。阻力特性仿真试验结果表明:在作业速度为0. 9～1. 5 m/s、曲面结构参数一定时,导曲线为抛物线型的开畦沟前犁和船式开沟犁具有较好的减阻特性,其平均牵引阻力相比直线型犁体分别低15. 09%、16. 92%,相比指数线型犁体分别低32. 59%、31. 58%。触土曲面的内蕴几何量E、L、M可分别反映犁体阻力随速度的增长速率、犁体牵引阻力大小、犁体阻力随速度的波动程度。当设计犁体的导曲线形状使曲面内蕴几何量E的变化率较小、L为单调减函数、M的波动较小时,犁体具有较好的减阻性能。参数优化仿真试验表明:在作业速度为1. 2 m/s、抛物线型开畦沟前犁宽度为92 mm、船式开沟犁整形曲面最大元线角为66°时,开畦沟装置牵引阻力最小,为1 042. 52 N。田间试验表明:经参数优化的组合式船型开畦沟装置在作业速度为0. 9、1. 2、1. 5 m/s时测试的平均牵引阻力分别为956. 77、1 101. 33、1 564. 85 N,与仿真试验结果误差在7%以内,作业效果满足油菜播种开畦沟的农艺要求。     

禽蛋基本特性参数分析与试验

为了探讨与禽蛋大小头自动定向排列机理相关的基本特征参数分布和估算模型,测定了禽蛋的几何尺寸、质心位置、体积和质量,研究了禽蛋几何尺寸与体积、质量的关系。结果表明,禽蛋的几何尺寸和质量都呈正态分布;禽蛋质心位于禽蛋长径中点处,相对于长径与短径交点向小头侧偏移3～5 mm,质心位置称重法优于支撑法;用标准椭球体体积计算方法估算的3种禽蛋体积与实测体积相关性均在0.94以上;禽蛋质量与禽蛋估算体积的相关性优于与长径、短径、蛋形指数、禽蛋长径处椭圆面积的三元和一元线性回归,3种禽蛋质量模型的相关系数均在0.95以上。     

基于分维的多尺度植被空间格局分析

植被是一个地区植物群落的总体，是对于生态环境因素的综合反映。植被在空间上的分布是典型的分维数体，它在空间所有尺度上都有细节。在许多情况下分维数具有某种形式的自相似性，即它不随尺度的增加或缩小而变化，它独立于尺度。因此比较不同尺度上树种的空间格局与其对应的分维数值，可以对不同尺度上的空间格局有一个全面的了解。通过变异函数计算出的格局的分维数值可以描述不同尺度上空间格局的拓扑学性状和自相似性，可以很好地揭示植被的空间异质性。     

NMR-Based Configurational Assignments of Natural Products: Gibbs Sampling and Bayesian Inference Using Floating Chirality Distance Geometry Calculations

Floating chirality restrained distance geometry (fc-rDG) calculations are used to directly evolve structures from NMR data such as NOE-derived intramolecular distances or anisotropic residual dipolar couplings (RDCs). In contrast to evaluating pre-calculated structures against NMR restraints, multiple configurations (diastereomers) and conformations are generated automatically within the experimental limits. In this report, we show that the “unphysical” rDG pseudo energies defined from NMR violations bear statistical significance, which allows assigning probabilities to configurational assignments made that are fully compatible with the method of Bayesian inference. These “diastereomeric differentiabilities” then even become almost independent of the actual values of the force constants used to model the restraints originating from NOE or RDC data.     

函数域的Minkowski常数(英)

对有限域Eq上某些函数域K（包括全实函数域和二次函数域）给出Minkowski常数Mk。使K的每个分式理想类包含次数≤Mk整理想AOk。     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Fractal几何的理论形成及应用发展

在阐述Ｆｒａｃｔａｌ几何由来和应用发展的基础上，分析了它在应用过程中对其理论体系的完善过程。着重指出目前Ｆｒａｃｔａｌ几何理论不再局限于对自然形体的形态描述及形成过程的分析上。而已开始用于对抽象表现空间的自然现象及的评价。Ｆｒａｃｔａｌ一词也在理论和应用发展过程中扩展了内涵。这充分说明理论和实践相辅相承共同发展这一哲学观点的正确性。