The effects of density and artificial substrate on intensive shrimp Litopenaeus vannamei nursery production

Recirculating aquaculture systems (RAS) can be installed indoors, allowing year-round production of tropical animals in nearly any climate. A nursery phase is commonly used in Litopenaeus vannamei production since it allows for enhanced biosecurity and better quantification of animals while reducing space requirements. However, it is unclear whether animal density and inclusion of artificial substrate may improve shrimp performance during the nursery phase. In this experiment, we compared shrimp production parameters in two stocking densities with or without the use of an artificial substrate by creating four treatments: low-density LD; 1500 PL/m⁻³, low-density with substrate LDS, high-density HD; 3000 PL/m⁻³), and high-density with substrate (HDS). The LDS and HDS treatments included 0.46-m² of high-density polyethylene 2.5-cm mesh as a substrate, which increased the tank surface area by 21 %. Each treatment was randomly assigned to four 160-l culture tanks, each with a biofilter. The shrimp had an initial weight of 4 mg and were grown for 50 days. The low-density treatments had significantly higher dissolved oxygen (DO) and pH than the high-density treatments (P ≤ 0.001). Specifically, LDS had the highest DO and pH followed by the LD, HD, and HDS treatments, respectively. High-density treatments had significantly higher NO₂-N levels than low-density treatments during week 2 of the experiment when an unusually high concentration of nitrite was observed. FCR was significantly lower in both low-density treatments than in high-density treatments. At harvest, the total biomass (kg m⁻³) was significantly higher in high-density treatments than in low-density treatments (P ≤ 0.001), and the HDS treatment had a significantly greater biomass output than HD. Producers should consider artificial substrate and higher densities during nursery production to maximize shrimp production; however, the effects on water quality should also be taken into account.     

关于苗木栽培技术的初步探讨

随着人民群众对生活环境和绿化水平要求的不断提升,苗木行业的市场发展可谓越来越蓬勃,行业前景也是越来越光明。因此与之相关的苗木栽培技术也受到越来越多人的关注。但目前我国苗木行业在栽培技术方面仍存在一定程度的欠缺和不足。基于此,着重对苗木栽培前期的选地、选苗等环节及栽植过程中的技术问题进行分析,希望对今后的工作有所借鉴。     

Glomus-wetland rice mycorrhizas influenced by nursery inoculation techniques under high fertility soil conditions

 We investigated the effect of nursery inoculation techniques on mycorrhizal colonization and sporulation, growth responses, and nutrient (N and P) uptake to determine the suitable nursey inoculation method of wetland rice (Oryza sativa L.) under high-fertility soil conditions. Seedlings were produced in dry-nursery (DN, watered to 60% of –0.03 MPa) and wet-nursery (WN, 3–5 cm water from the soil surface) conditions with or without arbuscular mycorrhizal fungal (Glomus spp.) inoculation. Soil was γ-ray sterilized before use in this experiment. Mycorrhizal fungal colonization was 56% in DN and 23% in WN plants at 6 weeks of growth. The arbuscular mycorrhizal fungal colonization was significantly higher in plants of DN origin than in WN plants after transplantation to the pots, irrespective of growing stages. Mycorrhizal colonization was significantly decreased to 28% in DN plants and to 25% in WN plants at harvest. The grain yield was significantly influenced by nursery conditions. N and P acquisition of wetland rice plants inoculated with Glomus spp. was significantly greater than that of non-inoculated plants at maturity, especially in those originating from DN conditions. P translocation from shoots to grain was accelerated by mycorrhizas. Received: 6 April 1997     

不同基质育秧对水稻秧苗素质的影响

研究营养土、基质、基质＋营养土3种育秧盘土以及盖种土为基质、营养土2种盖种方法对水稻机插秧苗素质的影响。结果表明：不论那种基质、那种配方作盘土,基质含量越高出苗越慢,叶龄相对较小。单株根条数、百株干重也随着基质含量增大而降低的现象。但通过基质与营养土按不同比例配比作盘土,用营养土盖种,能够培育适合水稻机插需要的健壮秧苗,同时随基质配比降低,育秧成本也随之降低。     

Evaluation of ultrasonic sensor for variable-rate spray applications

Automatic variable-rate sprayers require accurate measurement of canopy size. An estimate of canopy size is made by measuring the distance to the canopy at several elevations above the ground; an ultrasonic sensor was used to determine canopy distance in this study. It is sometimes necessary to conduct spray operations during harsh operating conditions. In this study ultrasonic sensors were subjected to simulated environmental and operating conditions to determine their durability and accuracy. Conditions tested included exposure to extended cold, outdoor temperatures, cross winds, temperature change, dust clouds, travel speeds and spray cloud effects. The root mean square (RMS) error in a series of measurements of the distance to a simulated plant canopy was used to test for significant difference among treatments. After exposure to outdoor cold conditions for 4 months, the RMS error in distance measured by the ultrasonic sensor increased from 3.31 to 3.55 cm, which was not statistically significant. Neither the presence of dust cloud nor the changes in cross-wind speeds over a range from 1.5-7.5 m/s had significant effects on the mean RMS errors. Varying sensor travel speed from 0.8 to 3.0 m/s had no significant influence on sensor detection distances. Increasing ambient temperature from 16.7 to 41.6 °C reduced the detection distance by 5.0 cm. The physical location of the spray nozzle with respect to the ultrasonic sensor had a significant effect on mean RMS errors. The mean RMS errors of sensor distance measurements ranged from 2.3 to 83.0 cm. The RMS errors could be reduced to acceptable values by proper controlling the sensor/spray nozzles spacing on a sprayer. In addition, multiple-synchronized sensors were tested for their measurement stability and accuracy (due to possible cross-talk errors) when mounted on a prototype sprayer. It was found that isolating the pathway of the ultrasonic wave of each sensor reduced detecting interference between sensors during multiple sensor operation. Test methods presented herein may be useful in the design of standardized testing protocols for field use distance sensors.     

沈阳月季种质资源圃的建立

自2007年4月建立月季种质资源圃以来,共收集、引进各类型月季2300余种,其中从荷兰、日本等国外引进品种1700余种。这些月季品种主要分为大花类、丰花类、藤本类、地被类、微型类、原始玫瑰类等六大类。该资源圃为我国东北地区最大的集品种资源保存、园林观赏、科学研究、科普教育等多功能于一体的月季种质资源圃。     

Fungicidal Control of Lophodermium seditiosum on Pinus sylvestris Seedlings in Swedish Forest Nurseries

During the 1990s, there were serious outbreaks of the pathogen Lophodermium seditiosum on pine seedlings in Swedish forest nurseries, even though the seedlings had been treated with the fungicide propiconazole. The present experiment was carried out to evaluate two other fungicides, fluazinam and azoxystrobin, as possible alternatives to propiconazole. In the tests, which were all carried out in the same forest nursery, seedlings were treated with either propiconazole, fluazinam or azoxystrobin, and the proportion of needles with ascocarps of L. seditiosum and the number of ascocarps per needle were recorded over the following 2 yrs. Seedlings treated with azoxystrobin already appeared healthier than control seedlings in September of the first year, and by November all azoxystrobin-treated seedlings had fewer ascocarps per needle compared with control seedlings. In autumn of the second year, there were no ascocarps on seedlings treated with fluazinam or azoxystrobin, whereas seedlings treated with propiconazole had similar numbers of ascocarps to non-treated control seedlings.     

霜冻害对苗圃育苗质量的影响分析

分析了苗圃育苗霜冻害产生的原因,提出预防霜冻害的措施。     

Variation in juvenile traits of natural black poplar (Populus nigra L.) clones in Turkey

Natural black poplar (Populus nigra L.) clones sampled from river courses were tested in the arid southeast region of Turkey, using a randomized complete block field design with four replications. Clones were laid out in row plots of eight ramets each. Height and apical dominance were assessed at age one year; diameter, survival, bole straightness and branchiness were measured at age two years. Clones differed significantly in survival, growth and quality traits. The results showed that promising clones exist in natural populations. Two commercial clones out of four did not grow as fast as the top new selection clones. For bole straightness, three commercial clones had significantly lower grading scores than the top best 14 clones. Principal components analysis indicated that growth, apical dominance and branching are the most important traits distinguishing black poplar clones. Diameter had a moderate correlation (0.34) with bole straightness. Relationships between geographic variables (elevation, latitude and longitude) with growth and stem quality traits were weak. Considerable genetic variation was observed among clones for all the traits. Genetic differences among the clones accounted for 27% (survival, bole straightness) to 39% (height) of the total variance. Broad-sense individual heritability ranged from 0.27 (survival) to 0.37 (apical dominance). Clonal mean heritabilities were higher than individual heritabilities and ranged from 0.60 (survival) to 0.82 (diameter), implying considerable gain could be realized via selective improvement methods.     

Effect of Scleroderma Spore Density and Age on Mycorrhiza Formation and Growth of Containerized Eucalyptus globulus and E. urophylla Seedlings

Greenhouse trials with containerized Eucalyptus globulus and E. urophylla seedlings were made to determine effective inoculum spore densities (Scleroderma cepa from temperate Australia, and S. citrinum from sub-tropical China) and spore storage conditions (fresh spores or spores stored for 5 years at room temperature or at 4 °C; S. albidum, S. areolatum and S. cepa from Western Australia). Inoculation with 10⁶ or 10⁸ spores/seedling increased eucalypt growth by up to 46% in height and 42% in dry weight compared to non-inoculated seedlings at 12 weeks after inoculation. Mycorrhizal formation was poor at 10² spores/seeding. Spores stored at 4 °C for 5 years were as effective in forming mycorrhizas as freshly collected spores when a standard density of 10⁶ spores/seedling was applied. It is recommended that spore densities ≥10⁴ be used for inoculation of containerised eucalypts and that spores be stored at 4 °C until use.