核桃芽接接穗高效繁殖试验

以5年生早实核桃辽宁1号为试材，通过研究接穗的采集时间，采集长度，可利用芽率，每根枝条可采接穗数等，得出核桃芽接接穗的高效繁殖技术。5月-6月应在新梢长到30cm-50cm时掐头，5天后，留1个-2个芽剪枝做接穗，在管理好的采穗圃，一年每个枝条可采5根-7根接穗，其中2/3用于夏季芽接，1/3用于秋季闷芽接，这些接穗上的接芽多充实，饱满，一株5年生树一年可采集接穗50根-80根，可利用接芽数为250个-400个。     

核桃枝枯病病原菌鉴定及其生物学特性

In May 2018,a new shoot dieback disease was found in several walnut orchards in Rizhao,Shandong Province.The fungal pathogen was obtained on PDA plate from diseased walnut shoots using a tissue isolation method.The purified fungal isolates formed white to grey colonies on PDA plate and three single spore isolates SDWa1-SDWa3 were obtained.Based on morphological characteristics and analysis of rDNA internal transcribed spacer (ITS),calmodulin (CAL),translation elongation factor 1-α (TEF1) and β-tubulin (TUB) sequences,the fungal isolates were identified as Diaporthe nobilis,a new pathogen on walnut.The test of Koch's rule confirmed that D.nobilis was the pathogen of walnut shoot dieback.To determine optimal growing conditions for the pathogen,its biological characteristics test was conducted.The results showed that the optimal growth temperature and pH value were at 25℃ and pH 5-9,respectively.The optimum carbon source was glucose,and favourable nitrogen source was peptone.     

新疆与美国早实核桃(Juglans regia L.)品种生长结实与成花特性比较

以引进的美国核桃品种‘维纳’、‘艾米格’和新疆本地品种‘温185’和‘新新2号’为试材,研究分析不同品种的植物学和生物学特性、花芽分化过程以及相关成花基因的表达。结果显示:4个品种在树体生长、枝芽发育特性、物侯期以及成花率和坐果率方面没有明显差异。在结果枝同一坐果部位形成双果、三果或以上的能力‘新新2号’明显强于‘维纳’,但‘新新2号’的果实大小和单果重都低于‘维纳’,而‘维纳’平均结果母枝上形成侧花芽的数量和坐果率高于‘新新2号’。从萌芽到开花结束直至当年侧芽发育过程中‘维纳’混合芽中的JrFT和JrLFY基因表达也高于‘新新2号’,而同时期的JrFLC基因表达则相对较低,说明‘维纳’在花芽分化和花器官形成过程中通过高表达JrFT和JrLFY基因,低表达JrFLC基因促进结果母枝上形成大量侧花芽,并利用大量侧花芽抽生结果枝坐果,形成较大的果实,使得最终产量并不低于同一个坐果部位大量着生2个或多个果实的‘新新2号’品种。     

Molecular cloning and sequence analysis of an LFY homologous gene from Juglans regia L.

The existence of a long juvenile phase is found seriously to affect the early-stage economic benefits of later mature walnuts (Juglans regia L.). Studies on LFY, a key gene controlling floral transition and flower differentiation, may be helpful in solving the problem. This study reports the identification and characterization of a JrLFY gene from Juglans regia L., a homolog of FLORICAULA/LFY. The gene was isolated from flower buds of precocious walnut cultivar Zhonglin No. 5 by RT-PCR and RACE. The cDNA sequence of JrLFY (GenBank accession no. GU194836) was 1496 bp and contained an ORF of 1158 bp. Its corresponding genomic sequence (GenBank accession no. HQ019159) showed that the JrLFY contained three exons and two introns. The predicted amino acid sequence of the gene consisted of 385 amino acids and had a conserved region in the C-terminal when being aligned with sequences of other LFY homologs. Phylogenetic analysis showed that the LFY protein of walnut was close to those of hickory and chestnut. These studies will lay a foundation for understanding the mechanism of early fruiting and preparation for transfer of the JrLFY as a transgene to later mature walnuts.     

芒果核仁油理化特性及其开发利用研究进展

芒果核仁是芒果加工的副产物,其中脂肪含量达9.0%~13.1%（干基）,从中提取的核仁油是一种优质油脂,具有较高的营养价值及开发利用前景。本文主要从芒果核仁油理化性质、脂质组成及开发利用等方面总结归纳近年来的科学研究进展,并与可可脂、类可可脂的甘油三酯组分进行对比分析,明确了芒果核仁油研究中存在的问题,并给出合理建议。     

新疆核桃腐烂病拮抗菌的筛选及鉴定

为给核桃促生菌群的构建提供菌株材料,通过对新疆核桃拮抗菌的分离纯化,筛选出对核桃腐烂病病原菌具有拮抗作用且能在其根际稳定定殖的优质高效菌株。从阿克苏、和田、喀什等新疆核桃主产区的根际土壤中分离出拮抗菌30株,采用对峙试验法对其拮抗能力进行测定,选出拮抗菌14株。经耐利福平诱导后剩余7株。将其进行大田定殖试验后,最终筛选出7株拮抗菌。经16S r DNA鉴定,这7株拮抗菌属于3个属,分别为假单胞菌属Pseudomonas、芽孢杆菌属Bacillus、链霉菌属Streptomyces,其中假单胞菌属为优势种属,且拮抗效果及稳定性最好。     

The Convergence Rates of Improveed Kernel Estimators for Regression Function

The kernel function of kernel estimator for regression function is often defined with compact support, the moment of Y is bigger than one. The convergence rate of the improved kernel estimator is discussed under the improved kernel function. The result is also discussed under random censorship. The class of applicable kernels include those having unbounded support and even not integral .The condition of moment of Y is discarded under the improved kernel estimator. The results are wholly the same as usual and generalize the relative results of the paper .     

基于KPCA-WLSSVM的建筑能耗预测模型

为降低建筑能耗影响因素间复杂相关性对模型性能的影响,建立了一种基于KPCA-WLSSVM的建筑能耗预测模型。利用核主元分析(KPCA)对输入变量进行数据压缩,消除变量之间的相关性,简化模型结构;进一步采用加权最小二乘支持向量机(WLSSVM)方法建立建筑能耗预测模型,同时结合一种新型混沌粒子群-模拟退火混合优化(CPSO-SA)算法对模型参数进行优化,以提高模型的预测性能及泛化能力。通过将KPCA-WLSSVM模型方法应用于某办公建筑能耗的预测中,并与WLSSVM、LSSVM及RBFNN模型相比,实验结果表明,KPCA-WLSSVM模型方法能有效提高建筑能耗预测精度。