A novel approach to studying the effects of temperature on soil biogeochemistry using a thermal gradient bar

The temperature dependence of chemical reaction rates and microbial metabolism mean that temperature is a key factor regulating soil trace gas emissions and hydrochemistry. Here we evaluated a novel approach for studying the thermal response of soils, by examining the effects of temperature on gas emissions and hydrochemistry in (a) peat and (b) soil from a Sitka spruce plantation. A thermal gradient was applied along an aluminium bar, allowing soil to be incubated contemporaneously from 2 to 18 °C. The approach demonstrated clear differences in the biogeochemical responses of the two soil types to warming. The peat showed no significant emission of CH₄ at temperatures below 6 °C, while above 6 °C, a marked increase in the rate of release was apparent up to 15 °C (Q₁₀ = 2.5) with emissions being similar between 15 and 18 °C. Conversely, CH₄ emissions from the forest soil did not respond to warming. Nitrate availability in the peat decreased by 90% between 2 and 18 °C (P < 0.01), whereas concentrations in the forest soil did not respond. Sulphate availability in the peat decreased significantly with warming (60%, P < 0.01), while the forest soil showed the opposite response (a 30% increase, P < 0.01). Conventionally, thermal responses are studied by incubating individual soil samples at different temperatures, involving lengthy preparation and facilities to incubate samples at different temperatures simultaneously. Data collected on a given thermal response is usually limited and thus interpolated or extrapolated. The thermal gradient method overcomes these problems, is simple and flexible, and can be adapted for a wide range of sample types (not confined to soil). Such apparatus may prove useful in the optimization of management practices to mitigate the effects of climate change, as thermal responses will differ depending on land use and soil type.     

CVT起步离合器模糊控制算法研究

探讨了汽车无级变速器控制的关键技术之一———汽车起步离合器的控制技术,并针对汽车起步时条件的多样性以及驾驶员意图的不确定性,研究了适用于复杂条件的模糊控制算法.在离合器的滑磨阶段,把动态跟踪发动机转速的油压作为控制目标,离合器结合的控制便转化为一闭环控制.结果表明汽车能在任意工况下平顺快速起步.因此,本研究为控制CVT(Continuously Variable Transmission)起步离合器这种时变、非线性系统提出了一种简单可行的解决方法.     

Relative bioavailability of organic bis-glycinate bound copper relative to inorganic copper sulfate in beef steers fed a high antagonist growing diet

To assess the relative bioavailability of bis-glycinate bound Cu, 90 Angus-cross steers (265 ± 21 kg) were blocked by body weight (BW) to pens with GrowSafe bunks and randomly assigned to dietary treatments (14 to 18 steers/treatment): 0 mg supplemental Cu/kg dry matter (DM; CON), 5 or 10 mg supplemental Cu/kg DM as Cu sulfate (CS5; CS10) or bis-glycinate bound Cu (GLY5; GLY10). Steers received a high antagonist growing diet (analyzed 4.9 mg Cu/kg DM, 0.48% S, and 5.3 mg Mo/kg DM). Steers were weighed at the beginning (days 1 and 0) and end (days 125 and 126) of the trial to determine average daily gain (ADG) and gain:feed (G:F). Blood was collected from all steers on days 0, 28, 56, 84, and 126. Liver samples were collected on days −3 or −2 and day 123 or 124. Data were analyzed using ProcMixed of SAS (experimental unit = steer; fixed effect = treatment and block). Plasma Cu was analyzed as repeated measures (repeated effect = day). Plasma and liver Cu concentrations were regressed against total Cu intake using ProcGLM to calculate relative bioavailability of GLY. Final BW and overall ADG were greatest for CS5 and CS10 and least for CON and GLY5 (P = 0.01). Overall, DMI was not affected by treatment (P = 0.14), but overall G:F tended to be greatest for CS5, CS10, and GLY5 and least for CON (P = 0.08). Total and supplemental Cu intake was greatest for steers supplemented either source at 10 mg Cu/kg DM and least for CON (P < 0.01). However, total and supplemental Cu intake was greater for CS5 than GLY5 (P < 0.01). Final liver Cu concentrations were greatest for CS10, least for CON, CS5, and CS10, and intermediate for GLY10 (P < 0.01). Final plasma Cu was greatest for steers supplemented either source at 10 mg Cu/kg DM (P < 0.01). Relative bioavailability of GLY was 82% compared to CS based on liver Cu (P < 0.01) but did not differ based on plasma Cu (P = 0.60). The lesser bioavailability of GLY relative to CS could be due to a high concentration of dietary antagonists and lower solubility of GLY (68.9% relative to CS) in pH conditions (5.2) similar to the ruminal pH of a beef animal consuming a high concentrate diet. Future studies should examine the effects of bis-glycinate bound Cu fed in blended combination with inorganic Cu sulfate to determine the most effective blend of sources for feedlot cattle experiencing varying amounts of dietary Cu antagonists.     

微肥Zn和Mn在苜蓿生产中的应用试验

针对河南省气候土壤特点,Zn、Mn肥的生理功能以及牧草生产利用中存在的问题,对Zn、Mn微肥在优质牧草紫花苜蓿Medicago sativa生产中的配施技术进行了研究.结果表明:Zn肥对紫花苜蓿的有效范围为400～500 mg/kg,最佳浓度为430 mg/kg.430 mg/kg的Zn肥与380 mg/kg的Mn 肥结合使用,效果更好,可使牧草产量提高10.7%,种子产量提高13.7%.     

Evaluation of immobilizing agents as soil quality conditioners in addition to their metal(loid) immobilizing effect

In trace metal (TM)-contaminated agricultural soils, management of TM availability is important for safe crop production. In addition, maintenance or improvement of soil quality is vital for sustainable crop cultivation. Decreased TM phytoavailability and increased soil quality can be achieved by the application of various immobilizing agents to soil, which can supply both macronutrients and organic matter. This study investigated the long-term influences of four common immobilizing agents on so...     

RFID技术在畜产品追踪中的应用

为使射频识别(RFID)技术在畜产品追踪中得到更好的应用,从RFID技术及应用原理构想了采用RFID技术对畜产品进行追踪的安全监控平台。     

开垦年限对黑土氮初级转化速率和净转化速率的影响

以东北黑土区开垦2 a和开垦30 a的典型旱作土壤为研究对象,采用15N同位素成对标记技术开展室内培养试验,利用数值计算模型(FLUAZ)计算不同开垦年限土壤的氮初级转化速率,以比较不同开垦年限黑土氮初级转化速率和净转化速率的差异,明确开垦年限对黑土氮转化过程的影响。结果表明,与开垦2a土壤相比,开垦30a土壤的有机碳和水溶性有机碳含量显著降低,导致土壤氮初级矿化速率和初级固定速率也显著降低。但开垦30a土壤的初级硝化速率、净硝化速率和净氮矿化速率却显著高于开垦2a土壤。两个开垦年限土壤的初级硝化速率分别为净硝化速率的1.15倍和1.02倍,说明土壤微生物对硝态氮的固定很少。开垦30a土壤的m/i值(氮初级矿化速率与初级固定速率之比)和n/ia值(初级硝化速率与初级铵态氮固定速率之比)均显著大于1,而开垦2 a土壤的m/i值和n/ia值均接近1。表明开垦2 a土壤的氮矿化与固定过程紧密偶联,氮素损失的风险较小,而开垦30 a土壤中氮矿化量超过了固定量,这为硝化作用的进行提供了底物,增加了硝酸盐反硝化和淋溶风险。     

污泥农用对痕量元素在小麦-玉米轮作体系中的积累及转运的影响

利用田间试验初步研究了污泥农用对小麦、玉米大田作物及土壤环境影响以及污泥中痕量元素在土壤与植物可食部分之间转移规律。结果表明,施用污泥后,尤其是36t·hm^-2施用量时,土壤中Zn、Cu、Cd、Pb、As和№的含量均显著增加,但是施用污泥4．5至36t·hm^-2后,除小麦籽粒中Zn、Cu含量和玉米籽粒中Zn、Cr含量显著增加外,其他痕量元素在小麦和玉米籽粒中的含量没有显著增加。作物籽粒中Zn含量与土壤中污泥施加量之间存在着显著的线性回归关系,土壤中增施1t·hm^-2之污泥,小麦和玉米籽粒中Zn的含量分别增加0．570和0．118mg·kg^-1。小麦和玉米籽粒除M和Pb的富集系数相近外,对其他痕量元素而言,小麦籽粒的富集系数显著高于玉米籽粒。从痕量元素的累积速率和现行土壤环境质量标准考虑,北京污泥中Hg是优先考虑控制的元素,但是污泥中№对食品安全的影响还需要进行长期的大田实验研究。     

Copper,Zinc, and Lead Fractions in Soils Long-Term Irrigated with Municipal Wastewater

Long-term irrigation with municipal wastewater may lead, even in spite of intense farming, to an accumulation of organic matter, nutrient elements, and trace metals in soils. Excessive increases of heavy metals may pose a potential risk to the food chain and provoke restrictions for the further cultivation of sensitive crops. Copper (Cu), zinc (Zn), and lead (Pb) forms in soils under long-term irrigation (for 100–120 years) with treated wastewater of Wroclaw were investigated by using selective seven-step sequential extraction (procedure of Zeien-Bruemmer) for partitioning the metals into operationally defined fractions, likely to be released in solution under various environmental conditions. The largest fraction of Cu, Pb, and particularly Zn in nonirrigated (control) soils was strongly bound in a residual form, while the percentage of exchangeable and the most labile fractions were negligible. Total concentration of metals in irrigated soils was elevated, and significant redistribution of metals among phases was observed. Percentages of residual fraction of Cu and Pb were no more than 25% (Zn < 40%), while significantly increased contribution of fractions occluded on iron (Fe) oxides and organically bound Cu. Exchangeable and readily mobile forms of Zn are predominant zinc fractions in soils irrigated with wastewater.     

不同前处理方法对秸秆金属元素原子吸收光谱分析结果的影响

秸秆中金属元素是关系农作物秸秆科学利用的重要组成部分,目前还没有统一的秸秆中金属元素原子吸收光谱(atomic absorption spectroscopy,AAS)测定方法标准,该研究采用原子吸收光谱测定黄芪(GBW10028)标准物质、玉米秸秆、小麦秸秆和棉花秸秆中金属元素含量,比较了不同前处理方法对样品中K、Cu、Fe、Zn和Mg分析结果的影响。结果表明:微波消解、干法灰化和湿法消解测定黄芪(GBW10028)标准物质中金属元素含量差异性显著(P<0.05),微波消解比干法灰化、湿法消解准确度高。微波消解对玉米秸秆、小麦秸秆和棉花秸秆中各金属元素的影响与黄芪(GBW10028)标准物质趋于一致。微波HNO3与微波HNO3-H2O2测定结果差异性不显著(P>0.05),微波HNO3比微波HNO3-H2O2和微波HNO3-H2SO4测定结果稳定。微波HNO3是进行秸秆样品金属元素含量测定时较准确简便的前处理方法。