Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

土的弹性抗力与墩顶固结结构物的联合计算

将土、基础及上部结构物视为一个整体，在计入土的弹性抗力后对多跨无铰拱和连续刚构的上下部结构进行联合计算，并给出了算例，可供设计参考。     

负刚度的工作原理及应用初探

This paper deals with the vibration isolation principle of a system with a negative stiffness spring and the energy analysis for this system.As an application of the method, an example of vibration systems with equal frequencies is given. It shows that th     

有源负载恒温槽性能分析

本文阐述了有源负载恒温槽的工作原理，推导了描述其静态特性的缩减因数表达式，并对这种恒温槽的性能和应用作出了评价。     

聚集器式气力集尘装置几个主要设计参数的合理确定

合理确定聚集器的静压、压力平衡基准、聚集器的压力损失、设计流量等参数，对于保证集尘装置工作的可靠性和经济性都有重要意义。     

一种准零刚度被动隔振系统的非线性共振响应分析

分析了一种机构的负刚度特性和它与线性主弹簧并联后而成的隔振系统的准零刚度特性，推导了准零刚度被动隔振系统的主谐波共振、亚谐波共振和超谐波共振的幅频特性表达式.结果表明，机构的负刚度区域随弹簧的初始变形与杆长的比值增大而变宽；隔振系统的准零刚度区域随主弹簧的刚度与机构中的弹簧总刚度的比值以及机构中的弹簧初始变形与杆长的比值增大而变宽；经比较发现，本文推得的被动隔振系统的同一种谐波共振幅频特性与杜芬方程的幅频特性均存在较大偏差.因此，对于这类被动隔振系统的运动微分方程，若以位移激励的幅值与激励频率平方的乘积代替单位质量的激励力幅值按杜芬方程的解来处理谐波共振问题将会带来较大误差.     

某厂区办公楼的结构设计

笔者结合工程实例,采用SATWE软件对单跨框架结构进行计算分析,并浅析了设计中应重点注意的问题。     

闭式脱粒滚筒的静动态性能分析

针对联合收割机中闭式脱粒滚筒有可能在外载荷作用下会发生较大变形和在外激励作用下发生共振的问题,采用SolidWorks软件对闭式脱粒滚筒进行了三维建模,以*.x_t格式导入Ansys Workbench建立有限元模型,然后对闭式脱粒滚筒进行静动态性能分析(即静态分析和模态分析)。静态分析结果表明,闭式脱粒滚筒的刚度和强度足够,变形均在设计允许范围之内;模态分析得到的闭式脱粒滚筒前6阶固有频率和振型结果表明,在规定的工况范围内,闭式脱粒滚筒在外激励作用下不会产生共振。研究结果为后续样机的设计和改进提供了理论依据。     

水电站进水塔结构分析方案研究

水电站进水塔结构的安全直接关系到整个电站的安全和效益。采用三维有限元法分别建立了实体单元模型和梁单元与实体单元混合模型,开展了静、动力分析研究,对两种模型的计算结果进行了对比。结果表明,水电站进水塔采用两种模型计算的结果呈现出相同的规律。水电站进水塔结构分析可采用以实体单元模拟的成果作为结构分析的基础,在前部拦污栅框架部分的内力分析和配筋计算上以梁系与实体联合模拟的成果作为有效补充,为工程设计提供更为科学合理的参考依据。     

THE ANALYSIS OF MECHANICAL CONSTRUCTION OF SURROUNDING ROCKS IN THE PITCHING SEAM

Defferent forms of mechanical construction, the distribution of stress, and the process of the deformation destruction in the enclosing rocks in a working face of a pitching seam are analyzed according to its geological and mining specialities.