插装阀阀芯优化与仿真分析

插装阀在静止状态下，由于静摩擦的原因，导致阀芯与阀套出现卡滞现象；在运动状态下，由于压差和阀芯微偏移的原因造成阀芯与阀套发生磨损；为此提出一种新型的带有导流槽的插装阀阀芯。基于缝隙流动和液压卡紧分析，建立插装阀阀芯与阀套间隙的CFD优化仿真模型，通过N-S方程、伯努利方程和卡紧力方程联立得到阀芯与阀套间卡紧力的推导公式。基于CFD仿真模拟分析，比较新型阀芯与原阀芯不同模型间隙的切线应力、压力分布规律，结果表明：在入口压力为12 MPa时，原阀芯的切线应力在12 000 Pa上下波动，大于新型阀芯切线应力4 200 Pa；在入口压力为8 MPa时，原阀芯的切线应力在7 200 Pa上下波动，大于新型阀芯切线应力3 000 Pa；且原阀芯切线应力的波动范围远大于新型阀芯。新型阀芯在阀套间的受力更加平稳，磨损更小。研究结果为插装阀优化以及减少能量损失和改善润滑条件提供理论指导和依据。     

手动比例复合阀在中高压液压绞纲机中的应用

中高压液压技术在海洋捕捞机械—绞纲机中的使用推动了我国渔业机械的发展,手动比例复合阀在中高压液压技术上的应用则大大加快了液压绞纲机在国内渔业生产中的普及。目前,我国浙江、江苏、福建、广东和山东等省沿海渔民使用的绞纲机普遍采用带手动比例复合阀的液压系统。为此,对手动比例复合阀换向、溢流、调速集成等功能进行了分析。     

可控止回阀水力特性的测试研究

本文运用水流相似原理，对可控止回阀的流阻系数曲线和动水力矩，进行了系统的水力模型试验研究，为该阀的节能效益和技术开发的可行性，提供了必要的科学依据，其流阻系数值为０．１９，优于液控蝶阀。     

我国农药残留快速检测技术的研究与应用现状

本文简述了目前农药残留快速检测技术的研究概况，分析了农药残留快速检测技术在我国的实际应用情况。     

X射线荧光光谱法快速测定稻谷中的镉

探索了一种对稻谷中重金属镉的快速、直接的测定方法,以适用稻谷集中收购、存储和流通过程中快速检测的的需要。样品无需前处理,直接磨成粉状即可上机测定。该方法采用X射线荧光光谱分析的原理,样品中的待测元素受激产生特征X射线,并由高性能探测器接收,得到镉元素的信号强度,然后根据信号强度与浓度的比例关系,经过软件处理自动计算样品中镉的含量,20min内完成精确定量。检出限可达到0.034mg/kg,实物标样标准偏差为0.016。此方法简单快速,并且准确性高,重现性好,可广泛应用于稻谷中镉的快速检测。     

水质快速检测设备的硬软件设计及实现

[目的]研制本质快速检测设备,实现水质的现场多指标快速检测.[方法]对设备的硬件及软件进行了设计.硬件设计包含了1P2303芯片、锂电,Cortex-M3型ARM微控制器、树莓派显示系统、光频转换器等的设计;软件设计则包含了软件设置、项目选项、项目测量结果以及测量数据表格输出等模块的设计;并对水质快速检测设备的可靠性进行了试验检验.[结果]通过对该设计的设备硬件和软件合理搭配连接,从而研发出了水质快速检测设备.用该设备与国家标准要求的设备同时测定某一河道水样的5项指标结果发现,3个样点水样中铁、氨态氮、氟化物、硝酸盐和6价铬含量的两组数据值接近,无明显差异.虽然国家标准法检测下限比快测法高一个数量级,但快速设备的测定结果不影响操作员对水质的判断,说明该水质快速检测设备精密度高;两种测定方法的稳定性比较,结果快速测定法的5个指标数据的相对偏差略高于国家标准法(3.92％),但其测定结果能够较好地满足现场测定要求,说明该水质快速检测设备稳定性良好.[结论]该水质快速检测设备的检测精度和稳定性较高,可满足水质的现场快速检测要求.     

大豆植株分杈数自动提取算法研究

根据大豆植株分杈个数可以预估大豆的产量。为了满足现代农业预测农产品产量的需要,本文提出一种大豆植株分杈数自动提取算法,即首先将采集到的大豆植株图片进行灰度变换、滤波、阈值分割得到二值图像,再进行形态学中的闭运算操作得到大豆植株的轮廓,然后基于Zhang并行快速细化算法提取骨架,最后借助改进的角点检测算法对大豆植株的所有分杈点进行标记并自动统计分杈数,仿真结果与大豆植株实际分杈点一致。     

美洲矾根愈伤组织诱导及其快繁技术体系研究

以矾根(Heuchera micrantha)植株不同器官为外植体材料,MS培养基为基本培养基,探索了矾根组织培养与快繁技术体系。结果表明,选取幼芽作为外植体时快繁效率最高,最适芽诱导培养基配方为MS+2.0 mg/L 6-BA+0.5 mg/L NAA,采用4/5MS+0.2 mg/LNAA的生根培养方案较为适宜。     

Comparison of N-terminal pro-atrial natriuretic peptide and three cardiac biomarkers for discriminatory ability of clinical stage in dogs with myxomatous mitral valve disease

Plasma N-terminal pro-atrial natriuretic peptide (NT-proANP) concentration increases with progression of myxomatous mitral valve disease (MMVD) in dogs. This multicentre, prospective study compared plasma NT-proANP, N-terminal pro-brain natriuretic peptide (NT-proBNP), ANP, and cardiac troponin I (cTnI) concentrations in dogs with MMVD for their characteristics and discriminatory ability to detect cardiac dilatation and congestive heart failure (CHF). Thirty-six healthy dogs and 69 dogs with MMVD were included. Clinical variables were obtained via physical examination, thoracic radiography, and echocardiography. The discriminatory ability of each cardiac biomarker (CB) to determine the presence or absence of cardiac dilatation (event 1) and CHF (event 2) was evaluated using the receiver operating characteristic curves. Plasma NT-proANP, NT-proBNP, and ANP concentrations showed a significant association with the left atrium/aorta ratio (P<0.01). The area under the curve of plasma NT-proANP and NT-proBNP concentrations were 0.72 and 0.75, respectively in event1 and 0.72 and 0.76, respectively in event2. Plasma NT-proANP and NT-proBNP concentrations showed sensitivity 80.0 and 80.0%; specificity 67.6 and 64.7% in event1 (cutoff value; 8,497.81 pg/ml and 1,453.00 pmol/l, respectively) and sensitivity 85.7 and 81.0%; specificity 60.4 and 64.6% in event2 (cutoff value; 8,684.33 pg/ml and 1,772.00 pmol/l, respectively). In dogs with MMVD, plasma NT-proANP, NT-proBNP, and ANP concentrations increase with left atrial enlargement. Particularly, plasma NT-proANP and NT-proBNP concentrations appeared to be equally useful in the discriminatory ability to detect cardiac dilatation and CHF.     

Quantification of reservoir bags as airway pressure-limiting devices in a nonrebreathing system

ObjectiveTo evaluate the influence of reservoir bag types, volumes and previous use on the peak pressures (Pmax) and the times to develop 30 cmH₂O pressure (P30) within a nonrebreathing system with a closed adjustable pressure-limiting (APL) valve.Study designIn vitro study using three-way factorial design with repeated measure on one factor.SubjectsA total of 75 new anesthesia reservoir bags (five types, three volumes, five bags from each type × volume). The bag types were reusable latex (RL), disposable latex (DL) and three disposable neoprene (DN-1, DN-2 and DN-3).MethodsEach bag was tested three times (treatments): new, after prestretching and 1 week later. The bags were attached to a Bain system and anesthesia machine with closed APL valve and patient port with O₂ flow 2 L minute^–1 until Pmax was reached. The Pmax and time to reach P30 values were determined from recorded pressure traces. General linear mixed model analysis was used to examine the effects of bag type, volume and treatment. One-sided 95% upper prediction limits of Pmax were calculated to test the null hypothesis that predicted Pmax of new bags would be ≥ 50 cmH₂O for each factor combination.ResultsRL bags were the least and DN-3 bags were the most compliant. Prestretching increased compliance in all bag types. Smaller bags of RL, DL and DN-1 were less compliant than larger ones. The predicted Pmax values were < 50 cmH₂O only for DN-3 bags after prestretching. The time to reach P30 was critically low when using 0.5 L bags (median 17 seconds).Conclusions and clinical relevanceTo minimize the risk of barotrauma, highly compliant reservoir bags (e.g. DN-3) are recommended and reusable bags should be avoided. Bags should be prestretched before first use, 0.5 L bags should be avoided and fresh gas flow minimized.