Effects of Large Saddle Panels on the Biomechanics of the Equine Back During Rising Trot: Preliminary Results

The saddle panels, directly in contact with the horse's back, are likely an important element to optimize the fitting of the saddle, the comfort of the horse, and subsequently, the pain management in dorsalgic horses. The aim of this study was to better understand the effect of the saddle panels on the horse's back, by evaluating a prototype saddle (comfort panels: CP) compared to a standard saddle (STD). The horse's back movements were measured using inertial measurement units (IMUs) fixed at the levels of thoracic vertebrae T6, T12, T16 (under the saddle) and lumbar vertebrae L2 and L5. The centers of mass (COMs) of the horse and the rider and limb's protraction-retraction angles, pressure between saddle and horse's back, and force on the stirrups were measured using respectively 2D motion capture, pressure mat and force sensors in the stirrup leather. Three horses were trotted at the rising trot (sitting: left diagonal-rider seated; standing: right diagonal-rider standing) by the same rider. To compare saddles, linear mixed-effects regression models were used. The estimated means (SE) were calculated. During sitting phase, pressure in the cranial and middle areas of the saddle significantly increased for CP compared to STD (+0.9 (0.2) kPa and +1.0 (0.1) kPa, respectively) whereas caudal pressure decreased (−1.8 (0.4) kPa). Concurrently, the range of motion of angles T12-T16 and T16-L2 under the saddle significantly increased (+1.8 (0.2)° and +2.3 (0.3)°, respectively). The results showed that modifications of the panels' shape not only affect the pressure distribution but also the kinematics of the thoracic and lumbar regions of the equine back.     

4个甜樱桃品种在德州的引种表现及设施栽培技术

对引入山东德州的4个甜樱桃品种美早、萨米脱、布鲁克斯、拉宾斯进行了日光温室栽培试验,对其性状表现进行了观察。结果表明,4个品种均表现生长良好,适应性强,结果正常,果实品质优良,可以作为德州地区日光温室的栽培品种发展。简述了4个甜樱桃品种在日光温室的栽培技术。     

呼和浩特市大气污染状况的研究及遥感信息的利用

利用遥感技术结合地物波谱测定和叶表面内大气污染元素的含量测定分析研究大气污染是一种有效可靠的方法。克服了常规大气监测的弊病。充分显示了快速、准确的优越性。为城市规划和环境的综合治理提供了可靠的科学依据。     

群钻钻削精度试验

通过群钻钻头直径Ｄ，进给量ｆ和切削速度ｎ对孔径扩张量，圆度，孔中心线垂直度和直线度影响的试验，得出它们的变化规律。     

基于模糊建模的混炼胶粘度测量

提出了一种在线测量混炼胶粘度的新方法．该方法以模糊建模技术为基础，综合考虑混炼过程各因素对胶料粘度的影响，建立起胶料粘度的在线测量模型．在模糊建模中，采用T-S模型描述胶料粘度变化的非线性过程，提出了一种基于相似性判别的模糊聚类算法以自动确定合适的聚类组数目，并用实数编码的遗传算法优化全局参数，从而获得了规则简化的、具有较高精度的模糊模型．根据此方法，设计了测量装置，并进行了现场试验．试验结果表明模糊模型输出与实验室测量值基本一致，平均误差较低且最大误差未超过1门尼．该方法较大地提高了橡胶混炼的生产效率，为粘度最优控制奠定了基础．     

高压无气喷涂工艺在大型储罐上的应用

分析了大型储罐传统防腐涂装方式的特点,指出了采用新型涂装方式的必要性,介绍了高压无气喷涂工艺的预处理、实施及注意事项,分析了高压无气喷涂工艺的实施效果,提出了储罐防腐的建议.     

焦锑酸钾沉淀法定位Ca~(2+)在梨生理研究中的应用

介绍了应用焦锑酸钾沉淀法定位Ca2＋的方法，以及在梨生理研究中的具体步骤和应用效果。结果表明：在固定液中加焦锑酸钾处理进行制样，梨树不同器官或组织细胞中的自由态Ca2＋，都能生成焦锑酸钙在原部位沉淀，经染色后在电子显微镜下呈现出黑色颗粒，而固定液中不加焦锑酸钾处理的则没有这种颗粒。再进一步用Ca2＋的专一性鳌合物EGTA进行处理，检查这些黑色颗粒是否消失，以证实黑色颗粒就是Ca2＋，从而可对Ca2＋进行定位标记。在不同的组织细胞及同一组织细胞在不同的生理时期，其被标记的Ca2＋密度和场所是不同的，可通过其动态变化来探讨它的作用机理。还对用此方法定位Ca2＋的注意事项进行了讨论。     

柚木(Tectona grandis)无性系繁育及造林技术

柚木为马鞭草科柚木属植物,是世界上最珍贵的用材树种之一。文章介绍了柚木的生物学特性、无性繁殖即组培技术要点以及造林技术,论述了柚木在我省的推广前景。     

春小麦新品种互麦14号栽培技术

介绍了我省育成的春小麦新品种—互麦14号的丰产栽培技术。     

5龄蚕立体条桑育研究

研究了5龄立体饲育架制作，条桑收获及饲养技术，明确了全年采用立体条桑育对蚕茧产质量及桑树秋末生长的关系，条桑收获及饲育是一项省工高效的养蚕技术。