不同阶段猪用颗粒饲料物理性能的对比分析

对某饲料厂不同阶段猪用4种颗粒饲料的物理性能包括直径、长度、硬度、容重、含粉率和耐久性指数（Pellet Durability Index, PDI）等进行测定,对结果进行归类总结并采用统计学的方法参照有关标准进行分析。结果表明,4种颗粒饲料直径在2.87~3.94 mm之间,母猪料直径最大,小猪料最小,两两之间差异显著（P<0.05）,而且随着猪只年龄的增加,颗粒饲料的直径呈递增趋势。颗粒长度在8.62~11.94 mm之间,以大猪料最长,小猪料最短,长径比偏高。颗粒硬度在3.86~6.47 kg之间,以大猪料最大,小猪料最小,中小猪料显著低于大猪料和母猪料（P<0.05）,只有小猪料符合有关要求。颗粒容重在576.7~614.6 g/L之间,母猪料最大,小猪料最小,两两之间差异显著（P<0.05）,与直径呈相同的增减趋势。含粉率以小猪料最大,且只有小猪料与大猪料之间差异显著（P<0.05）。颗粒PDI以大猪料最大,小猪料最小,各阶段猪料的含粉率和PDI均符合有关要求。建议饲料厂家注重颗粒饲料物理性能指标的控制,调整饲料配方和工艺参数,不断改进颗粒饲料的质量。     

Maize kernel color depends on the interaction between hardness and carotenoid concentration

Maize kernel color and carotenoid concentration are traits valued by the food industry to ensure the quality of their products. Correlations between color and carotenoid concentration have been extensively reported. Based on the concept that chromaticity is modified differently by opaque and translucent materials, we tested the hypothesis that maize kernel color is not only the result of total carotenoid concentration but also a consequence of kernel hardness. Kernel hardness (test weight, vitreousness, and floaters percentage), carotenoid concentration, and color (HunterLab) were measured in thirteen commercial hybrids. Genotypes showed significant differences in all analyzed kernel hardness traits, carotenoid concentration (24.7–39.4 mg kg⁻¹), and HunterLab color dimensions. Kernel color values and kernel hardness were correlated. Genotype differences in b (yellowness) were observed in kernels with similar total carotenoid concentration but contrasting hardness. For a similar carotenoid concentration harder genotypes always showed lower b values. When whole kernels were milled and color was measured on the resulting flour, genotype differences in yellowness disappeared, further supporting that the kernel vitreous structure affects kernel color. Our results sustain the notion that the genotype capacity to form larger proportions of vitreous endosperm impacts color regardless of total carotenoid concentration.     

纳米Al_2O_3改性水性木器漆耐磨性和硬度的研究

为提高水性聚丙烯酸酯木器漆的耐磨性和硬度,进行纳米Al2O3浆料的制备及其对水性木器漆改性的研究,探讨分析不同制备方法和Al2O3添加量对漆膜耐磨性和硬度的影响。结果表明:以聚丙烯酰胺为分散剂、聚乙二醇和辛基酚聚氧乙烯醚为润湿剂、聚乙烯吡咯烷酮为稳定保护胶,在高速搅拌下制成的纳米Al2O3浆料,在透射电镜下观察发现纳米Al2O3颗粒分布均匀,具有良好的分散性;在不影响漆膜透明度的情况下,漆膜耐磨性和硬度随Al2O3添加量增加得到提高,添加量在1.5%时漆膜具有较好的耐磨性和硬度;纳米杂合工艺法的漆膜耐磨性和硬度优于后添加法制备的水性木器漆涂膜。     

收获期木薯地耕作层土壤硬度的试验研究

采用田间物理测定和数理统计分析方法,测定了收获期木薯种植地耕作层不同深度的土壤硬度,建立了耕作层深度与土壤硬度的数学模型,分析了土层深度对土壤硬度的影响规律。结果表明:建立的木薯地耕作层土壤硬度与深度的数学模型精度高,硬度与深度基本上成3次方的非线性关系;采用盖膜方式种植的木薯地,其土壤硬度先随土层深度的增大而增大,后随土层深度的增大而缓慢增大或减小;不采用盖膜方式种植的木薯地,其土壤硬度先随土层深度的增大而减小,后随土层深度的增大而增大,最后又随土层深度的增大而减小。     

Design method and homogeneity control of bridge fair-faced concrete

According to the structural characteristics of bridge engineering, the mix optimization design method of bridge fair-faced concrete was presented, and C30~C50 concrete with high cohesion and package, outstanding fluidity and excellent mechanical properties were prepared. Through the test of air content of fresh concrete, micro hardness and micro structure in different parts of hardened concrete specimens, effects of viscosity-modifying admixtures on homogeneity of concrete were discussed. The results showed that the composition of bridge fair-faced concrete were relatively homogeneous, and the microstructure were relatively dense. When C30 concrete mixed with 5 × 10 -5 cellulose ether or 6% silica fume (mass fraction of cementitious material), air content of fresh concrete were less than 2%, and slurry viscosity values were between 1 900 and 2 000 MPa·s. Also, the micro hardness values in different parts of hardened concrete specimens were closed. The results were applied in practical bridge engineering, which generally meets the apparent quality requirements of bridge fair faced concrete.     

农田土壤含水率与坚实度快速信息采集系统

介绍了一种农田土壤含水率与坚实度快速信息采集系统.本系统包括土壤介电传感器、圆锥指数传感器及深度传感器,可以快速、同步、实时地获得0～500mm范围内土壤剖面含水率与圆锥指数信息.同时,本系统还结合了GPS和GIS技术,实现了土壤参数的空间分析,可以更方便地把系统应用于农田信息管理.本系统为实现土壤水分和坚实度的同步测量搭建了一个智能化的试验平台,并且在与德国波恩大学农业工程研究所的合作中成功地应用于田间测量.     

35CrMo旋转接头激光表面硬化技术的试验研究

用L9(34)正交试验法研究35CrMo旋转接头激光相变硬化工艺参数优化组合,分析了旋转接头激光相变硬化方法.试验结果表明:激光相变硬化层硬度比渗氮淬火提高了30%,耐磨性提高了1倍,表面残余应力为压应力;满足了旋转接头工作要求,为改进旋转接头表面处理方法提供了依据.     

冀西北坝上地区退化防护林的土壤性质

为了解冀西北坝上防护林退化与土壤性质的关系,以河北省张北坝上地区杨树防护林为研究对象,比较了不同退化程度杨树防护林的土壤养分和土壤硬度。研究结果表明:1随林分退化程度的增加,土壤硬度和出现钙积层的概率均有增加的趋势。2除速效钾表现出明显差异外,不同退化程度防护林土壤有机质、全磷、速效磷、全氮、碱解氮、全钾含量无明显差异。3张北坝上地区土壤养分含量总体处于较低水平。根据全国第2次土壤普查养分分级标准,其有机质为4级,磷素和氮素为6级,钾素为5级。4土壤有机质含量与全氮、碱解氮、全钾、速效钾、全磷和速效磷含量呈显著或极显著正相关关系,全氮与碱解氮、全钾与速效钾含量呈显著正相关关系,全磷与速效磷含量没有明显的相关关系。尽管张北坝上的地区土壤养分含量普遍较低,但防护林退化程度与多数土壤养分含量没有明显的相关关系,而与土壤硬度的高低及钙积层的有无具有一定的相关性。     

俄罗斯小麦籽粒硬度及puroindoline基因等位变异的分布

小麦籽粒硬度是重要的品质性状之一,对小麦加工品质具有重要影响.为了合理引进种质资源,培育高品质小麦品种,本研究利用小麦硬度指数测定仪JYDB100×40对引进俄罗斯小麦品种的籽粒硬度进行检测,利用STS标记和变温PCR对控制籽粒硬度基因puroindoline的主要等位变异进行分析.结果显示:208个俄罗斯引进小麦品种硬度指数范围为45.6 ～79.2,硬质麦品种为190个(91.35％),混合麦品种为18个(8.65％).Pina基因有Pina-D1a、Pina-D1b和杂合Pina-D1a/ Pina-D1b共3种类型,所占比例分别为87.02％、10.10％和2.88％.Pinb基因有Pinb-D1a、Pina-D1b、Pinb-D1c和双位点突变Pinb-D1bc 4种类型,所占比例分别为37.02％、55.77％、3.85％和3.37％.统计结果显示:携带Pina-D1b+Pinb-D1a基因小麦籽粒硬度指数显著大于Pina-D1a+Pinb-D1b,Pina-D1a+Pinb-D1a和Pina-D1a+Pinb-D1bc.其他puroindoline等位变异之间没有显著差异.俄罗斯硬质麦种质资源丰富,是改善我国小麦籽粒硬度和品质的重要遗传材料.     

Calculating the contact area of trailer tyres in the field

The spectacular increase in the weight of self-propelled harvesters since the early 1980s also applies to trailed implements such as slurry spreaders, compost spreaders, cutter-blowers and general farm trailers. With axle loads exceeding 10 tonnes/axle (tandem 20 tonnes, tridem 27 tonnes), risks of severe compaction can now be expected, not only in field crops but also in grassland. Calculation tables for accurately evaluating contact surfaces of transport tyre, given their properties, load and inflation pressure, are insufficient at the present time. Equations for traction tyres are not suitable for trailer tyres.To overcome this deficiency, contact areas in the field were recorded on 19 sites, from soft to hard surfaces, using 24 different trailer tyres, with varying loads and inflation pressures. The regression calculations for evaluating the contact area apply to a total of 143 measurements.The dimensions of the tyre (width × unladen diameter), the load on the wheel and the inflation pressure are all highly significant variables for evaluation of the soil contact area. Considering the average residual standard deviation for each regression calculation, the best approximations are achieved by taking into account the tyre structure (cross-ply and radial), the width of tyre for cross-ply tyres and the type of tyre, in the case of a radial tyres (low profile or terra profile).Moreover, contrary to expectations, observations show that with low levels of load, reducing inflation pressure can also reduce the contact area.As regards soil hardness, observations show that there is no direct link between a hard soil and a reduced contact area; this relationship does not appear to be linear. The calculations are considered to be reliable on semi-firm to firm soil, frequently found on temporary grassland or natural grassland (penetration resistance 6.5–25.0 MPa).