L波段低噪声放大器的电路设计与性能分析

闸述了L波段低噪声晶体管放大器中各种降低噪声措施的基本原理,给出了低噪声电路设计的一般原则,以及L波段卫星地面接收系统前端低噪声高频放大器输入级中噪声匹配电路的设计举例.     

装修与电气

本文着重地论述了由装修而引发的电气安全技术问题已到了不容忽视的程度。就此问题作 者提出了自己的观点及解决办法。     

电阻电桥传感放大器性能的改善

在构成基本型电阻电桥传感放大器的基础上给出了三种改善其性能的方法。１）补偿法。２）补偿加放大器改进综合法。３）负反馈法。通过实验证明了理论分析和实际效果是一致的，从而对电阻传感器在非电量检测中的广泛应用具有一定的实际意义。     

中小型水电站发电机专用断路器的选择

正确设计选择发电机保护断路器直接关系到水电站后期的电气设备合理投资、运行维护及保证水电站长周期安全经济地运行.过去中小型水轮发电机大都选用普通型的油断路器或真空断路器或SF6断路器等,近些年来选用普通真空断路器的越来越多.中小型水电站应根据不同接线方式、不同容量的发电机出口断路方法,选择发电机专用断路器.     

Quantification of reservoir bags as airway pressure-limiting devices in a nonrebreathing system

ObjectiveTo evaluate the influence of reservoir bag types, volumes and previous use on the peak pressures (Pmax) and the times to develop 30 cmH₂O pressure (P30) within a nonrebreathing system with a closed adjustable pressure-limiting (APL) valve.Study designIn vitro study using three-way factorial design with repeated measure on one factor.SubjectsA total of 75 new anesthesia reservoir bags (five types, three volumes, five bags from each type × volume). The bag types were reusable latex (RL), disposable latex (DL) and three disposable neoprene (DN-1, DN-2 and DN-3).MethodsEach bag was tested three times (treatments): new, after prestretching and 1 week later. The bags were attached to a Bain system and anesthesia machine with closed APL valve and patient port with O₂ flow 2 L minute^–1 until Pmax was reached. The Pmax and time to reach P30 values were determined from recorded pressure traces. General linear mixed model analysis was used to examine the effects of bag type, volume and treatment. One-sided 95% upper prediction limits of Pmax were calculated to test the null hypothesis that predicted Pmax of new bags would be ≥ 50 cmH₂O for each factor combination.ResultsRL bags were the least and DN-3 bags were the most compliant. Prestretching increased compliance in all bag types. Smaller bags of RL, DL and DN-1 were less compliant than larger ones. The predicted Pmax values were < 50 cmH₂O only for DN-3 bags after prestretching. The time to reach P30 was critically low when using 0.5 L bags (median 17 seconds).Conclusions and clinical relevanceTo minimize the risk of barotrauma, highly compliant reservoir bags (e.g. DN-3) are recommended and reusable bags should be avoided. Bags should be prestretched before first use, 0.5 L bags should be avoided and fresh gas flow minimized.     

连续工作方式下掺Yb光纤放大器的增益与噪声特性研究

对连续工作方式下掺Yb光纤放大器的增益与噪声特性进行理论研究,从描述掺Yb光纤放大器的速率方程与光传输方程出发,计算了掺Yb光纤放大器的增益与噪声指数,讨论在975nm泵浦光的作用下,泵浦功率、器件长度对放大器增益和噪声指数的影响。     

泵站继电保护设计方法

分析了进口、国产继电保护设备的不同，提出了对泵站继电保护二次回路的设计新方法。泵站二次设计可按照“单元”设置的原则，将泵站二次设计划分为10／6kV泵站进线、主机、站变、所变、联络等主要单元。     

CMOS集成块在水电站控制电路中的应用

在水电站控制电路中,为完成全站逻辑选控开停机,逻辑选控同期合油开关、跳油开关的功能,用CMOS集成电路替代分立元件,从而提高了水电站的自动化程度,缩小了集控台体积,也有利于安装、调试和维修。     

车辆用永磁发电机磁路分析与试验研究

应用等值磁路理论对磁路进行了分析，用图解法求解出钕铁硼永磁体的工作点，研制出了一种无电励磁绕组、无碳刷滑环结构，故障率低的永磁发电机，采用单相双半渡可控整流稳压式电子稳压器，集稳压、整流于一体，电能消耗少，发电效率高，解决了车辆用永磁发电机在变转速变负荷工况下输出电压保持稳定的问题。     

农用运输车部分电路的改进设计

针对农用运输车的现状、发展前景进行了简要地分析,为了保证行车安全,在转向时加装了前侧灯照明装置、倒车及转向时加装了音乐报警装置;为了保证车辆的安全运行,在气压制动系统中增加安全保护开关,控制发动机的点火电路(汽油机)或熄火电磁阀电路(柴油机),可实现低气压时的自动保护,以保证车辆正常行驶。