插装阀阀芯优化与仿真分析

插装阀在静止状态下，由于静摩擦的原因，导致阀芯与阀套出现卡滞现象；在运动状态下，由于压差和阀芯微偏移的原因造成阀芯与阀套发生磨损；为此提出一种新型的带有导流槽的插装阀阀芯。基于缝隙流动和液压卡紧分析，建立插装阀阀芯与阀套间隙的CFD优化仿真模型，通过N-S方程、伯努利方程和卡紧力方程联立得到阀芯与阀套间卡紧力的推导公式。基于CFD仿真模拟分析，比较新型阀芯与原阀芯不同模型间隙的切线应力、压力分布规律，结果表明：在入口压力为12 MPa时，原阀芯的切线应力在12 000 Pa上下波动，大于新型阀芯切线应力4 200 Pa；在入口压力为8 MPa时，原阀芯的切线应力在7 200 Pa上下波动，大于新型阀芯切线应力3 000 Pa；且原阀芯切线应力的波动范围远大于新型阀芯。新型阀芯在阀套间的受力更加平稳，磨损更小。研究结果为插装阀优化以及减少能量损失和改善润滑条件提供理论指导和依据。     

A comparison of the effects of carbon dioxide and medical air for abdominal insufflation on respiratory parameters in xylazine-sedated sheep undergoing laparoscopic artificial insemination

AIMS: To determine if abdominal insufflation with medical air will improve oxygenation and ventilation parameters when compared to insufflation with CO₂ in xylazine-sedated sheep undergoing laparoscopic artificial insemination (AI).

METHODS: Forty-seven sheep underwent oestrus synchronisation and were fasted for 24 hours prior to laparoscopic AI. Each animal was randomised to receive either CO₂ or medical air for abdominal insufflation. An auricular arterial catheter was placed and utilised for serial blood sampling. Respiratory rates (RR) and arterial blood samples were collected at baseline, after xylazine (0.1?mg/kg I/V) sedation, 2 minutes after Trendelenburg positioning, 5 minutes after abdominal insufflation, and 10 minutes after being returned to a standing position. Blood samples were collected in heparinised syringes, stored on ice, and analysed for arterial pH, partial pressure of arterial O₂ (PaO₂), and CO₂ (PaCO₂). The number of ewes conceiving to AI was also determined.

RESULTS: Repeated measures ANOVA demonstrated temporal effects on RR, PaO₂, PaCO₂ and arterial pH during the laparoscopic AI procedure (p<0.001), but no difference between insufflation groups (p>0.01). No sheep experienced hypercapnia (PaCO₂>50?mmHg) or acidaemia (pH<7.35). Hypoxaemia (PaO₂<70?mmHg) was diagnosed during the procedure in 14/22 (64%) ewes in the CO₂ group compared with 8/23 (35%) ewes in the medical air group (p=0.053). Overall, 15/20 (75%) ewes in the CO₂ group conceived to AI compared with 16/22 (72.7%) in the medical air group (p=0.867).

CONCLUSIONS AND CLINICAL RELEVANCE: There were no statistical or clinical differences in RR, PaO₂, PaCO₂, pH, or conception to AI when comparing the effects of CO₂ and medical air as abdominal insufflation gases. None of the sheep experienced hypercapnia or acidaemic, yet 42% (19/45) of sheep developed clinical hypoxaemia, with a higher percentage of ewes in the CO₂ group developing hypoxaemia than in the medical air group. Based on the overall analysis, medical air could be utilised as a comparable alternative for abdominal insufflation during laparoscopic AI procedures.     

竹材弦面纵向切削的研究

研究了竹材弦面纵向切削的3种切削方式(单劈刀切削、单刨刀切削及并列式双刨刀切削)及单刨刀切削时的切削阻力,结果表明:对竹材采用劈或刨的切削方式,均可进行弦面纵向切削并能获得质量较好的竹蔑。竹材的节间、节部、切削厚度、含水率及切削速度等因素对切削阻力均有不同程度的影响。节部切削阻力明显高于节间切削阻力;切削阻力随切削厚度的增大而增大,两者成线性关系;含水率增大时,节间切削阻力减小,而节部切削阻力变化不大;切削速度增大时,节间切削阻力基本上是下降的,而节部切削阻力是增大的。     

砂垫层基础的设计与施工措施

在各类工程中砂垫层的作用不同,作者对软弱地基在结构设计中采用砂垫层这一措施进行了详细叙述。     

谷物冷却机回风利用与节能

分析了谷物冷却机采用回风型冷却的节能原理及优点，回风型冷却具有重要的节能意义。     

采种大白菜地膜复盖的研究

为了提高大白菜(B. campestris ssp pekinensis.)种子的产量和质量,我们进行了两年地膜覆盖研究。结果表明:无论直播小株、育苗小株、老株那种采种方式,凡使用地膜覆盖的均比不覆盖的产量增加30％左右,质量也明显的提高;聚乙烯、聚氯乙烯都是良好的地而覆盖材料,在大白菜种子生产中可以取得相近似的效果。     

地膜覆盖对棉枯萎病发生的影响

地膜覆盖显著降低了棉花枯萎病的发病率与病情指数，极显著地提高了棉花的产量。     

南方鲶肌肉,鳔及胡子鲶肌肉的水解和游离氨基酸研究

本试验测定了南方鲶肌内和鳔及胡子鲶肌肉的水解氨基酸和游离氨基酸含量，并对其营养价值进行了比较，评价。     

直列4缸内燃机双轴平衡系统设计

直列4缸平面布置曲轴内燃机存在不平衡的二阶往复惯性力,采用兰氏双轴平衡系统,可以平衡二阶往复惯性力,使内燃机的噪声和振动明显下降。     

土的弹性抗力与墩顶固结结构物的联合计算

将土、基础及上部结构物视为一个整体，在计入土的弹性抗力后对多跨无铰拱和连续刚构的上下部结构进行联合计算，并给出了算例，可供设计参考。