用简易诊断法检查判断液压系统各元件的工作性能

故障的排除首先在于判断，目前基层维修网点大多数没有检测仪器和设备，出了故障乱拆乱卸，导致液压元件工作失灵，甚至整车液压系统瘫痪。拖拉机液压系统产生故障的主要原因是液压元件工作性能恶化引起的。为此，介绍了在没有检测仪器和设备的条件下，如何应用简易诊断法检查判断各液压元件的工作性能。     

手动比例复合阀在中高压液压绞纲机中的应用

中高压液压技术在海洋捕捞机械—绞纲机中的使用推动了我国渔业机械的发展,手动比例复合阀在中高压液压技术上的应用则大大加快了液压绞纲机在国内渔业生产中的普及。目前,我国浙江、江苏、福建、广东和山东等省沿海渔民使用的绞纲机普遍采用带手动比例复合阀的液压系统。为此,对手动比例复合阀换向、溢流、调速集成等功能进行了分析。     

农机液压技术的应用与发展

液压技术的应用已成为现代化农业机械的典型标志。为此,介绍了农机液压技术的应用现状;并根据科学技术的发展,简要分析了农机液压技术的发展趋势。     

Effect of Heat‐treatment on Accuracy of Infrared Spectroscopy and Digital and Optical Brix Refractometers for Measuring Immunoglobulin G Concentration in Bovine Colostrum

Background

Heat‐treatment of colostrum is a method developed to reduce calf exposure to pathogens. Infrared (IR) spectroscopy and Brix refractometers can be used for measuring colostral IgG concentration and assessing colostrum quality.

Objectives

To determine the impact of heat‐treatment on accuracy of IR spectroscopy and Brix refractometers for measuring colostral IgG concentration and assessing colostrum quality before and after heat‐treatment.

Animals

A total of 60 Holstein dairy cows on 8 commercial dairy farms.

Methods

A cross‐sectional study was designed to determine the effect of heat‐treatment at 60°C and 63°C each for 30 and 60 minutes duration on colostral IgG concentration measured by the reference radial immunodiffusion (RID) assay, IR spectroscopy, and digital and optical refractometers.

Results

Colostrum IgG concentration significantly decreased after heat‐treatment at 63°C for 30 or 60 minutes as measured by RID, but the IgG values remained unchanged when measured by IR spectroscopy and refractometers. The lowest correlation coefficient found between IR spectroscopy (r = 0.70) and RID results was in colostrum heat‐treated at 63°C for 60 minutes. For digital (r = 0.48) and optical (r = 0.50) refractometers, the lowest correlation coefficient was at 63°C for 30 minutes when compared to RID. The accuracy of the IR spectroscopy, digital and optical Brix refractometers was decreased from 91.7 to 80%, 81.7 to 45%, and 80 to 45%, respectively, when colostrum heat‐treated at 63°C for 60 minutes.

Conclusions and Clinical Importance

Radial immunodiffusion, IR spectroscopy, and Brix refractometers exhibit utility for measuring IgG concentration when colostrum heat‐treated at 60°C but does not detect decrease IgG concentrations when heat‐treated at 63°C.     

Impact on soil physical properties of using large-grain legumes for catch crop cultivation under different tillage conditions

In Central Europe, various plant species including large-grain legumes and their mixtures are grown as catch crops, particularly between grains harvested early and subsequent summer crops. This article investigates the question of how soil structure in the topsoil is influenced when catch cropping with large-grain legumes (experimental factor A: without catch crop, with catch crop) under different ploughless tillage conditions during catch crop seeding (experimental factor B: deep tillage/25–30 cm, shallow tillage/8–10 cm). Five one-year trials were performed using standard machinery at various sites in Germany. Soil core samples extracted from the topsoil in the spring after catch crop cultivation served to identify air capacity, saturated hydraulic conductivity and precompression stress. The above-ground and below-ground biomass yields of the catch crops were also determined at most of the sites. In addition, the soil compaction risk for the working steps in the experiments was calculated using the REPRO model.The dry matter yield of the catch crops varied considerably between the individual trial sites and years. In particular, high levels of dry matter were able to form in the case of early seeding and a sufficient supply of precipitation. The soil structure was only rarely affected positively by catch crop cultivation, and catch crops did not contribute in the short term to loosening already compacted topsoils. In contrast, mechanical soil stresses caused by driving over the ground and additional working steps used in cultivating catch crops often led to lower air capacity in these treatments. This is consistent with the soil compaction risks calculated using the REPRO model, which were higher in the treatments with catch cropping. Catch crop cultivation also only resulted in improved mechanical stability at one location. The positive effect of deep ploughless tillage on air capacity and saturated hydraulic conductivity, however, became more clearly evident regardless of catch crop cultivation. In order for catch crop cultivation with large-grain legumes to be able to have a favourable impact on soil structure, it is therefore important that cultivating them does not result in any new soil compaction. In the conditions evaluated, deep tillage was more effective at loosening compacted topsoil than growing catch crops.     

生产力发展与农村居民消费观念的变迁

介绍了我国农村地区生产力水平的发展现状,2004年中央惠农政策实施以来,农村地区生产力水平得到了迅速提升,主要表现在：农村劳动力文化素质的大幅度提升;农业生产机械的保有量不断增加;生产管理和决策水平不断提高。分析了生产力发展对农村居民消费观念变迁的推动作用：夯实了农村居民消费观念改变的物质基础;改善了农村居民的消费结构;提高了农村居民消费的社会化程度。提出了培育农村地区新的消费热点的对策建议：引导农村居民树立起现代消费理念;加大政策扶植力度;引导农村居民树立健康消费理念。     

支管射流三通结构优化与试验

为了提高支管射流三通水力性能,改善滴灌的灌水均匀性,基于CFX数值模拟技术,对进口宽度为15 mm的支管射流三通进行结构优化.选取位差、劈距、劈尖半径和侧壁倾角为影响因素,通过四因素三水平正交设计了9组模型,边界条件设定为进口压力100 kPa.选取支管射流三通出口设计流量为评价标准,支管射流三通最优结构尺寸为位差5.5 mm、劈距113 mm、劈尖半径13 mm、侧壁倾角10°.此结构尺寸参数下的支管射流三通水力性能试验结果表明:在进口水压为100 kPa时,支管射流三通脉冲频率为148次/min,水头压力振幅为37.9 kPa,水头压力损失为16.7 kPa,出口流量为0.698 L/s;支管射流三通所接滴灌带长度为60 m时,与普通支管三通相比,支管射流三通的灌水均匀系数提高了2.78%,流量偏差率降低了4.72%.该研究可为射流技术在脉冲滴灌系统的研究、开发与应用提供理论依据.     

基于Simulink的液压系统建模与仿真

针对农业机械中液压系统结构复杂、研发周期长等问题,通过分析农业机械中液压回路各个组成元件特性,基于Simulink构建元件动态数学模型。对液压回路进行研究,分析了液压回路在不同元件参数下的动态性能,为优化液压回路系统提供参考。     

基于径向基神经网络的非寿险公司财务预警研究

选取我国保险行业中40家非寿险公司2006~2008年的混合非平衡面板数据作为研究样本，采用径向基神经网络模型从偿付能力、盈利能力、成长能力三个角度对非寿险公司财务预警进行研究。实证表明，此模型可以为管理层的财务预警提供更有有效的信息，并且在我国保险业具有样本量小，有效数据少的情况下，有着良好的运用前景。     

抛物线形混凝土衬砌渠道标准化结构形式研究

通过实例比较了2种常用的抛物线形渠道水力最佳断面参数,得出二次抛物线渠道的水力性能优于半立方抛物线形渠道,并推导出了二次抛物线渠道实用经济断面的计算公式,提出了详细的计算步骤,给出了二次抛物线渠道实用经济断面水力计算表以供设计人员使用。同时,根据渠道工程实际应用情况和现行规范要求,提出了抛物线形混凝土衬砌渠道标准化结构形式,计算得出了常用抛物线形混凝土渠道结构尺寸、不同比降流量表,在实际工程应用中可根据设计渠道的具体情况进行选用。