小麦深施肥播种机应用与效果初探

通过新型的小麦深施肥播种机的应用，实现了小麦深施肥播种，使种、肥分箱不同床，解决了过去化肥对种芽、幼苗的危害问题。达到了节本增效、增产增收的目的。     

Short time effects of biological and inter-row subsoiling on yield of potatoes grown on a loamy sand,and on soil penetration resistance,root growth and nitrogen uptake

Soil compaction, especially subsoil compaction, in agricultural fields has increased due to widespread use of heavy machines and intensification of vehicular traffic. Subsoil compaction changes the relative distribution of roots between soil layers and may restrict root development to the upper part of the soil profile, limiting water and mineral availability. This study investigated the direct effects of inter-row subsoiling, biological subsoiling and a combination of these two methods on soil penetration resistance, root length density, nitrogen uptake and yield. In field experiments with potatoes in 2013 and 2014, inter-row subsoiling (subsoiler) and biological subsoiling (preceding crops) were studied as two potential methods to reduce soil penetration resistance. Inter-row subsoiling was carried out post planting and the preceding crops were established one year, or in one case two years, prior to planting. Soil resistance was determined with a penetrometer three weeks after the potatoes were planted and root length density was measured after soil core sampling 2 months after emergence. Nitrogen uptake was determined in haulm (at haulm killing) and tubers (at harvest). Inter-row subsoiling had the greatest effect on soil penetration resistance, whereas biological subsoiling showed no effects. Root length density (RDL) in the combined treatment was higher than in the separate inter-row and biological subsoiling treatments and the control, whereas for the separate inter-row and biological subsoiling treatments, RLD was higher than in the control. Nitrogen uptake increased with inter-row subsoiling and was significantly higher than in the biological subsoiling and control treatments. However, in these experiments with a good supply of nutrients and water, no yield differences between any treatments were observed.     

精密播种之电子驱动系统设计

本文研究的排种自动控制系统是依据前轮转速控制排种,在排种量、粒距和前轮转速之间建立关系,并以单片机为核心,配以测速装置、驱动装置及处理电路,输出合理驱动脉冲驱动步进电机的转动,进而带动排种器轴转动达到均匀排种目的的一种电子驱动系统方案.     

免耕播种机试验与应用研究

主要论述了保护性耕作关键装备—2BM-9型免耕播种机的技术参数与工作原理,论述了其性能试验、可靠性试验及应用效果。通过性能试验与生产考核表明:该机各项指标均达到了设计要求,使用可靠性大于98%,调整使用方便性大于97%。经测试与调查统计知:该机对作物留茬地提高土壤含水率6%～9%,减少农田风蚀50%～80%,提高土壤有机质含量0.04%～0.08%,增加农民收入10%～15%。经过4年的推广应用,取得了良好的经济社会生态效益,对促进保护性耕作技术的实施有着重要的作用。     

震动气吸针式精量播种机的性能与应用

为适应园艺农业的发展，在借鉴国外同类播种设备的基础上，开发出一种国产全智能精量播种机。本文介绍了该机的工作过程、主要性能指标及需改进的方向。     

水稻田间育秧精密播种机设计与试验

为提高田间育秧播种机的播种合格率和播种稳定均匀性,设计了一种适用于南方水稻田间育秧的精密播种机。在深入分析螺旋勺轮式播种器的播种原理,以及播种器行走控制系统的基础上,采用正交试验方法,研究了螺旋勺轮的凹槽深度、螺旋升角、播种器行走速度对播种合格率和空穴率的影响规律,得出杂交稻播种合格率和空穴率影响因素的最佳参数组合:凹槽深度h为3 mm、螺旋升角α为81.73°、播种器行走速度v为0.35 m/s。试验表明,采用闭环控制系统后的播种机播种杂交稻2~6粒/格合格率由87.14%提升到93.21%,常规稻3~8粒/格的播种合格率为92.14%,播种性能满足常规稻和杂交稻精密播种育秧的技术要求。     

播种检测技术的研究进展与趋势

播种作业过程中,一旦出现播种异常现象应能及时报警,并检测出故障的性质和位置,以便机手排除故障,提高播种机的播种质量。要实现这一目的,就必须对播种性能施全程监控。为此,介绍了播种检测技术发展概况,指出了提高精密播种机田间播种质量的关键问题,分析了播种检测技术的发展趋势。     

探讨集中式排种器的排种机理及其发展

目前传统排种器多属于“一器单行”型式。机械式对种子尺寸要求严格、破碎率高;气力式能耗大、结构复杂、使用要求高。而集中式排种器(或系统)是对“一器单行”技术的突破,满足精密播种的要求。主要论述了国内外集中式排种器的工作原理、发展概况及其存在的问题。     

三种不同变量施肥执行机构的比较研究

目前,国内外有3种变量施肥执行机构。为此,通过对3种国内外变量施肥执行机构的设计方案进行比较研究,分析出各自的特点,选择出适合黑龙江垦区国产大豆精密播种机的变量施肥执行机构,为设计研制适合国产大豆精密播种机的变量施肥执行机构创造条件。