DYNAMIC MODELS OF AQUIFEROUS CONTENT OF LIVING FUELS

RESEARCHSITELivingfue1splayedanimportantroleinheatconcentrationactionorinheatsourceofforestfire.Whenitshumiditydecreasestoacertainlevel,theybecameaheatsourcewhenthelivingcombustibl-eswerecombinedwithfire.Thus,itwasessentialhowtodeterminethemoisturesituationandthefOrestfiredangerdegreetobeforecastedaccurately.Thedynamicmodelspresentedinthispaperwereusefultosolvethisproblem.Everyyear,-therewerealotofforestfires,especiallythefireoccurrenceinDaxinganMountains,inthespringofl987.Itwasveryimpo…     

潜江小城镇景观规划

潜江小城镇的水资源丰富但开发落后，绿系统不完善，街景缺乏工艺性。在对现状调查分析的基础上，提出了对过境公路、水体、街景进行动感空间、情感空间规划的建议，对乡土化设计、恢复性设计进行了探讨。     

无源电力滤波器电路参数非线性约束优化

对偏调谐类单调谐滤波器提出了非线性的束优化模型，运用大系统理论协调优化单调谐滤波器和高通滤波器，实例计算表明，该方法是对以往单调谐滤波器设计计算方法的一大改进。     

呼伦贝尔市农业结构调整最优方案

根据不同区域气候特点和产量水平,运用系统工程理论中的线性规划方法对该市的作物种植结构进行了调整,在种植面积基本不变的情况下,净产值增加了15.3%和17.3%;并在不同的气候区域设计了不同作物种植的最佳组合方案。这对增加农业种植效益和农民收入,有效改善生态环境,保持农业的可持续发展等方面都具有显著的经济、社会和生态效益。     

江西省古树资源系统研究报告

研究对象只限于散生于江西省山下及村落的30851株古树，不涉及自然保护区、森林公园中的古树。根据古树生长特征，分析其时间分布(古树级及树龄)、空间分布(设区市分布、县域分布)，借助于动态聚类统计分析方法从不同方向进行数量分类，并对数量分类成果用判别分析进行检验。最后对各县域每km^2和每万人负荷古树数进行核算，用数据资抖说明县域保护古树的重要性，增强县域保护古树的责任感。     

河北省承德地区防护林体系林种结构的最佳模式

本文用线性规划方法,把以防护效益为主并满足社会需求作为约束条件,使防护林工程的费用最小作为目标,计算出了河北省承德地区防护林体系林种结构的61个方案。对不同情况,如资金不足、取得较好的经济效益、解决木材供需矛盾以及其它条件的变化等等,可以从61个方案中选出一个最佳方案。     

5个草地型草地牧草的生长速率和养分动态研究

在牧草生长季节(5~9月)对小哨牧场放牧演替形成的5个草地型草地的牧草进行生长速率、牧草产量及养分的逐月观测,生长速率测定显示,白三叶+东非狼尾草和东非狼尾草+非洲狗尾草两个草地型草地均出现两个生长峰值,分别在6月和9月,其余3个草地型草地只有一个生长高峰。干物质产量和牧草养分测定结果表明,白三叶+东非狼尾草和白三叶+非洲狗尾草+画眉草两种草地型草地表现最好,可以在气候环境条件类似的地区推广种植利用;白三叶+画眉草和白三叶+非洲狗尾草两种草地型草地表现优良,可以在草地改良中,根据当地实际情况选择性地加以种植;东非狼尾草+非洲狗尾草型草地表现较差,不提倡种植。     

设施油桃根系的生理生化代谢动态

研究了设施栽培条件下曙光油桃根系的碳氮物质代谢、POD和SOD活性的动态变化。结果表明,在新根的生长季节,根系中可溶性糖、蛋白质含量、游离氨基酸总量、POD、SOD活性的变化与新根的生长具有相同的趋势,淀粉则相反。粗根的淀粉、可溶性糖含量、POD活性高于细根,而蛋白质含量、游离氨基酸总量和SOD活性则变化较大。     

秦巴山区养羊户适度经营规模的研究

通过对秦巴山区陕西省西乡县15个典型陕南白山羊养殖专业户的资金投入、羊群结构、草地资源、经济效益等情况的调查，分析了养羊户的资源利用和生产经营状况，确定了与山羊生产密切相关的12个变量，即种公羊数、基础母羊数、后备母羊数、育肥羊数、羊舍面积、草地补种及施肥费用、医杂费、氨化或青贮饲料量、补饲精料量、工作日、投资额，并确定了各变量的参数值，以利润最大为目标函数，然后运用线性规划模型，计算出不同投资、不同人力及草地资源等条件下的适度经营规模。结果表明，养羊户的投资额是决定适度规模的主要因素。根据投资和羊群基础母羊数量设计的三种典型经营条件下，基础母羊全部留种的经营方式可获最大投资收益率(140．1％)；基础母羊数量达到20只以上，自繁种公羊的经营方式的最大投资收益率为74．0％；资金有限，人工授精配种的经营方式的投资收益率最低，为73．1％。     

Reducing crude protein variability and maximizing savings when formulating corn-soybean meal-based feeds

Crude protein in corn and soybean meal have been documented to vary, and such inherent variability can result in under- or over-feeding of CP when feeds are formulated, leading to reduced bird growth, added input costs, and increased environmental pollution. The purpose of this study was to compare 2 grain-handling techniques and 2 feed formulation methods (linear vs. stochastic programming) to reduce CP variability in finished feeds and determine resulting costs or savings. The 2 grain-handling techniques were placing all the random batches of each delivered ingredient in to (1) a single bin (1-bin method) or (2) segregating above- and below-average samples into 2 bins (2-bin method). A fast way of estimating the composition of the ingredients is now available (near-infrared reflectance spectroscopy). Microsoft Excel workbooks were constructed to solve broiler starter feed formulation problems. Formulating feeds by linear and stochastic models based on the 2-bin method reduced CP variability by at least 50% compared with the 1-bin method. Formula cost was reduced by ˜20 cents per ton (averages of August 2012 United States ingredient prices) when the 2-bin method was used with the linear model. Formulating feed with a margin of safety increased formula cost by $3.40 per ton. Stochastic feed formulation increased formula cost to meet the specified CP level in feed at any probability of success, and formula cost was reduced substantially with the 2-bin method (up to $6.47 per ton). The magnitude of savings and reduced feed variability suggested that, regardless of the costs associated with building extra bins, the 2-bin method can be economically efficient in the long run. Therefore, it could be possible to split the batches of feed ingredients at a feed mill into above- or below-average bins before feed formulation to reduce CP variability and to maximize savings.