基于模糊建模的混炼胶粘度测量

提出了一种在线测量混炼胶粘度的新方法．该方法以模糊建模技术为基础，综合考虑混炼过程各因素对胶料粘度的影响，建立起胶料粘度的在线测量模型．在模糊建模中，采用T-S模型描述胶料粘度变化的非线性过程，提出了一种基于相似性判别的模糊聚类算法以自动确定合适的聚类组数目，并用实数编码的遗传算法优化全局参数，从而获得了规则简化的、具有较高精度的模糊模型．根据此方法，设计了测量装置，并进行了现场试验．试验结果表明模糊模型输出与实验室测量值基本一致，平均误差较低且最大误差未超过1门尼．该方法较大地提高了橡胶混炼的生产效率，为粘度最优控制奠定了基础．     

Different biological behaviour of Waldenström macroglobulinemia in two dogs

Waldenström Macroglobulinemia is a low‐grade immunosecretory disorder associated with lymphoid tumours, which is rarely reported in veterinary medicine. In this study, we describe two clinical cases of this rare syndrome in dogs, each characterized by a different onset and clinical course. In one case, a hyperacute onset and aggressive behaviour of the neoplasm was observed. Absolute serum viscosity (SV) was retrospectively evaluated in order to explain clinical findings. Rotational viscosimetry showed good precision in measuring SV. Both dogs had SV values higher than a control groups of healthy dogs although only one subject developed hyperviscosity symptoms and complications. At high paraprotein concentrations, a slight reduction of the M‐component was associated with a marked decrease in SV. Thus, this work suggests that SV assessment is a relevant tool for managing monoclonal gammopathies, whose usefulness should be further confirmed in larger cohorts of dogs.     

不同粘度矿物油助剂对除草剂活性的影响

室内及温室内测定了10种不同粘度矿物油助剂对除草剂防除苘麻和稗草药效的影响及对玉米苗期的安全性。结果表明,10种矿物油助剂均不同程度地增加了氰草津和烟嘧磺隆防除两种杂草的活性。其中粘度为46 mm2/s (40℃)的矿物油乳剂(MOC46)对供试除草剂药效的增强作用最为明显,其次为粘度32 mm2/s (40℃)的矿物油乳剂。10种助剂对氰草津药效的增强作用大于对烟嘧磺隆。MOC46对除草剂活性的增加由高到低依次为:莠去津、氰草津＞莠去津+氰草津、莠去津+烟嘧磺隆、氰草津+烟嘧磺隆＞烟嘧磺隆;对玉米苗期安全性依次为:莠去津、烟嘧磺隆、莠去津+烟嘧磺隆＞莠去津+氰草津、氰草津+烟嘧磺隆＞氰草津。氰草津与MOC46混用对玉米苗期药害较重。     

The evolution and application of enzymes in the animal feed industry: the role of data interpretation

ABSTRACT

1. Enzymes have been used commercially for nearly 40 years and save significant costs through sparing of expensive nutrients but the mechanism by which this is achieved is still debated.

2. The research focused on non-starch polysaccharidase (NSPase) enzymes is used as an example of where greater progress could have been made if the details of the work had been described more fully and the analysis of the data generated had been broader in scope and more critical.

3. Lack of standardisation of the details presented in the materials and methods has been identified as a significant barrier to meaningful retrospective analysis and thus limits advances in the understanding of the mode of action of these enzymes.

4. The identity of the enzyme employed and its activity is often lacking, and more importantly the purity is rarely disclosed. Contaminant activities which are neither listed nor assayed could play a significant role in the responses observed.

5. The dose optimum of most enzymes is often considerably higher than that employed in most studies. Thus studies claiming synergy between two ‘activities’ should ensure that the response is not related to each enzyme simply augmenting the dose of just one activity in the finished feed. This is a common problem, and coupled with the lack of factorial experiments to justify the presence of each enzyme in a multi-enzyme product, it is not surprising that there is still debate as to whether single or multi-enzymes are best suited poultry rations.

6. The three proposed mechanisms for NSPases (viscosity, cell wall and prebiotic) are discussed, and along with their strengths and weaknesses it is suggested that a re-evaluation of each is needed. Viscosity may have to be re-evaluated as being a function not only of the cereal being fed, but of the age of the animal as well. The cell wall theory as described is poorly modelled in vitro and hence the validity of these data is questioned. The prebiotic theory may need significant modification as it appears that the quantities of oligomers produced are insufficient to generate the additional volatile fatty acids (VFA)’s reported. It is likely that all three mechanisms play a role in the responses observed, but the prebiotic mechanism probably plays by far the most important part in low viscosity diets.

7. Future research would be improved if it considered all potential mechanisms when designing a trial. Significant failings are apparent as a result of adherence to tenets in explanation of the results. Most importantly, it should be emphasised that a hypothesis is there to be tested, not defended.     

The effect of orifice shape and the injection pressure on enhancement of the atomization process for pressure-swirl atomizers

The following paper presents results of studies on the atomization process of water in pressure-swirl atomizers with different shapes of orifice using a laser diffraction technique. The effect of the shape of the orifice and the injection pressure on the droplet size distributions and mean droplet diameters was analyzed. The results obtained showed that droplet size decreases with an increasing injection pressure and droplet size distributions are expanded. The smallest droplet diameters were obtained by atomization in profiled and conical shaped orifice atomizers, however the largest droplet diameters were achieved for plain orifice atomizers. The analysis of the interfacial surface produced by the atomizers has shown that the greater enhancement of the atomization process had occurred using profiled and conical shaped orifice atomizers compared with plain orifice atomizers. The correlation for the Sauter mean diameter as a function of the Reynolds number and the ratio of orifice length to diameter has been proposed. The paper is related to agricultural water management. The data obtained are important from the point of view of the design of atomizers, agricultural treatments and crop protection.     

Assessing the deposition and canopy penetration of nozzles with different spray qualities in an oat (Avena sativa L.) canopy

Consistent spray coverage that is evenly distributed throughout the canopy is necessary to control pest populations that can negatively affect yield. As applicators are switching to Coarser spray quality nozzles to reduce risk and liability of pesticide spray drift, concerns about efficacy loss are growing. Previous research has indicated that small droplets are the most effective at penetrating through crop canopies, but newer nozzle technologies have improved the effectiveness of larger droplet or Coarser sprays. Research was conducted to assess the canopy penetration of nozzles that produce Coarse, Very-Coarse and Extremely-Coarse spray qualities compared to nozzles that produce Fine and Medium spray qualities. Kromekote collectors were positioned in four configurations in an oat (Avena sativa L.) var. ‘Yarran’ (AusWest Seeds, Forbes, NSW, Australia) crop to quantify the coverage and droplet number densities (droplets cm⁻²) across three application carrier volume rates: 50, 75 and 100 L ha⁻¹. Applications were made in the field in 30 cm tall, tillering oats, with collectors arranged in a randomised complete block design with three replications. The entire study was repeated on the following day. Results showed that droplet number densities were inversely related to the droplet size produced by the nozzles, yet coverage was increased more by application volume rate than droplet size. Thus, both spray drift reduction and improved canopy penetration can be achieved with proper nozzle selection and operation parameters for the control of agronomic pests.     

不同水分,温度条件下CO2浓度对大米品质的影响

试验选用当年新收获的稻谷加工成的水分为１３．９％、１４．７％和１６．０％的大米，在２３℃和３３℃的恒温室中，将７种不同浓度的ＣＯ２经减压调湿后通入粮堆。定期取样，测定大米的脂肪酸、水溶酸、还原糖、非还原糖、粘度和过氧化物酶活性的变化。试验结果表明：１３．９％水分的大米在２３℃下储藏，各种浓度ＣＯ２对大部分品质指标影响不显著，ＣＯ２的保质作用不明显；１４．７％水分的大米在２３℃储藏，ＣＯ２对个别品质     

3MG-30型果园弥雾机的研制与试验

研制了一种与小四轮拖拉机配套的、适用于标准化果园植保作业的机载果园型弥雾机，对该机各项性能指标进行了试验与分析。试验结果表明，与其他类型喷头相比，按一定排列组合的空心雾锥喷头在与风机配合使用进行药液的2次雾化时具有更好的喷雾量分布和雾滴分布均匀性；小于35m/s的风机出口风速所产生的梯度气流使枝叶扭转与退让，并使雾滴的穿透性和树内沉积量增加，提高了作业质量和机组生产率。