蜗壳式离心泵外特性仿真与实验研究

为探索不同仿真方法的适用性,对ns=157的单级蜗壳离心泵不同工况的扬程和效率进行定常和非定常计算,并分别分析了定常计算时不同叶片夹角及非定常计算时不同时间步长的影响,通过与实验对比,得到的主要结论有:定常计算仅适用于额定工况外特性仿真,其扬程和效率计算误差分别为4.9%和2.9%,而定常多相位的计算误差分别为7.1%和3.2%;非定常仿真计算时,以4°为时间步长,并间隔20°保存一次计算数据,较好地预测出扬程曲线走势,额定工况扬程和效率计算误差约1.1%和1.8%,但小流量和大流量区间扬程计算误差达到10%左右。因此在水力优化设计时,若只关注高效点位置及其扬程和效率,可采用定常计算,若还关注扬程曲线走势,则应采用非定常计算。     

休闲农园节约建设规划设计的探索与实践

休闲农业是乡村经济发展的重要途径,也是乡村振兴的有力推手.休闲农园是实现农业多功能、三产融合、增产增收的重要载体.目前,资金短缺成为休闲农园发展的桎梏,研究其低成本打造及管理意义重大.从规划设计角度出发,结合多年规划设计实践经验,对休闲农园的低成本投入、低成本管理、集约高效生产、节约型景观美化提升以及绿色生态可持续发展等方面做了有益探索,以期为乡村振兴添砖加瓦.     

Experimental investigation on the transport of different fish species in a jet fish pump

A jet fish pump with a throat of ø60 mm was designed to study its performance in the transport of different fish species and the physiological changes in fish thereafter. Experiments were conducted to investigate the fish transport rate and energy required to transport each ton of fish when transporting Carassius auratus, commonly known as the Chinese goldfish, Megalobrama amblycephala, or Wuchang bream, and Ctenopharyngodon idella, the grass carp. Fish were examined for external injuries as well as for several important enzymes and hormones which are indicators of tissue injury and stress. The results showed that the transport rate for all three species of fish rose dramatically with an increase in the primary stream rate. In this experiment, the transport rates of C. auratus, M. amblycephala and C. idella reached 2357 ± 37.2 kg ∙ h⁻¹, 2888 ± 41.6 kg ∙ h⁻¹, and 2060 ± 40.2 kg ∙ h⁻¹, respectively. However, both injury rate and energy required to transport each ton of fish increased no matter whether the primary stream rate was too low or too high. Considering both transport rate and injury rate, the mean primary stream rate of 80 m³ ∙ h⁻¹ was determined to be the optimal operating condition in this experiment. Fish were stressed and most likely some of their organs were damaged. However, most physiological indexes almost fully recovered after several hours.     

Engineered-airlift pumps for aquaculture applications using multiphase flow analysis

Currently, very few aquaculture operations are employing airlift pump technology for water recirculation, aeration, and waste removal. This is likely due to the poor design and lower efficiency of traditional airlift design, the limited amount of research effort that has been invested in improving performance capabilities of air lift pumps and the general lack of awareness of the industry about the inherent advantages of airlift systems. A new efficient airlift pump is hydrodynamically designed by incorporating the Volume of Fluid (VOF) multi-phase model along with the K-ε turbulence model utilizing Computational Fluid Dynamics (CFD) tools. The pump is designed to offer a substantial reduction in total energy usage as well as an improved quality of the culture products in order to make it attractive to aquaculture industry. In this study, both numerical and experimental investigations were carried out for airlift systems operating under two different submergence ratios of 50% and 90% in a lab setting using 2.54 cm diameter pumps. Also, the performance of a large-scale pumps of 10.16 cm diameters were also tested in an aquaculture raceway to determine its effect on the operation. The numerical results were found to be in agreement with the experiments within ±20% which is considered very reasonable for multiphase flow analysis. The present study was found to present a great tool for modelling the airlift pump performance, and potentially proposing new designs.     

京津冀一次区域性暴雨特征分析

利用FNL再分析资料、卫星资料和自动站资料对2019年7月22~23日京津冀一次区域性暴雨过程进行了环流形势、卫星云图、动热力结构的分析。结果表明:此次暴雨发生在500hPa两槽一脊、副热带高压北抬、低空急流的大尺度环流背景下。西南方向的水汽输送和黄渤海的补充水汽为暴雨提供了良好的水汽条件,在河北中部的水汽辐合抬升则为暴雨提供了抬升条件。此次暴雨的产生受中尺度对流云团的连续生成合并影响,降水效率高。在暴雨中心整层表现为低层辐合、高层辐散,上升速度中心明显,使得高层的抽吸作用更强,更有利于上升运动的维持与发展,为降水强度增大提供了有力的动力条件,高空弱冷空气的入侵对能量锋区不稳定能量的释放起到了触发作用。     

叶轮出口边对双蜗壳泵压力脉动的影响

泵的叶轮扫掠蜗壳隔舌时产生的压力脉动是引起船用泵振动噪声的原因之一.为尽可能弱化这一影响,分别设计了叶片出口边与前后盖板基本面垂直和倾斜的2种不同形式叶轮,将其配置在相同的双蜗壳中,通过数值计算与样机试验相结合的手段,对蜗壳内9个不同位置的压力脉动情况进行对比分析.结果表明:出口边倾斜的叶轮相比于出口边垂直的叶轮可明显改善蜗壳内次脉动的“驼峰”现象,且可以进一步降低隔舌处主波动的压力峰值;对蜗壳内2个隔舌稍前的位置,出口边倾斜的叶轮反而会使得该点的压力系数幅值明显增大,且该点主波动的周期数发生改变;2种叶轮出口边的不同形式对蜗壳出口位置的压力脉动的影响基本相同;采用出口边倾斜叶轮对改善因叶轮与隔舌间的液流压力脉动是可行的.     

低、无毒农药防治花灌木主要刺吸式口器害虫

在查清天津市园林主要花灌木刺吸口器害虫桃粉蚜、绣线菊蚜、棉蚜和山楂红蜘蛛发生消长规律的基础上 ,确定了防治适期和结合点 ,筛选出 10 %吡虫啉、绿灵、蚧螨灵、 1. 8%齐螨素和花保5种低、无毒药剂 ,防效均达到 90 %以上。查出天敌 13种 ,并对优势种作了取食量调查     

泡沫比例混合器在液下喷射灭火系统中的应用

提出了环泵泡沫比例混合器和泡沫压力比例混合器在相应灭火系统中的应用、安装和操作中应注意的问题，对两种泡沫比例混合器组成的系统进行了对比，认为环泵比例混合泡沫灭火系统采用正压进水，可以克服负压进水方式存在的缺陷，比较适合油库火灾的扑救；压力比例混合泡沫灭火系统灵活性、匹配性较差，适用于泡沫混合液流量相对不变的火灾扑救。     

甘蓝型双低隐性核不育杂交种沪油杂1号的选育

沪油杂1号(原编号SH-19)是利用隐性上位互作核雄性不育系20118A育成的甘蓝型双低杂交油菜品种.20118A的育性由2对隐性重叠基因和1对隐性上位基因控制,基因型为aabbRfRf,临保系的基因型为aabbrfrf,恢复系的基因型为AA__或__BB__.沪油杂1号种子含油量42.43%,芥酸含量0.62%,硫甙含量24.23μmol/g.在上海市油菜区域试验中平均产量2 243.3kg/hm2,比双高对照汇油50增产11.9%,比双低对照沪油15增产3.8%;在上海市油菜生产试验中平均产量2 244.0kg/hm2,分别比对照汇油50增产33.6%,比对照沪油15增产15.9%.     

迷宫螺旋槽的选取研究

以提高迷宫螺旋泵的扬程、流量、效率、汽蚀等性能参数为目标,给出不同使用条件下螺旋槽形状与几何参数的选取。