杨梅简易气调保鲜过程中气体成分变化及保鲜效果

以东魁杨梅为试材,研究简易自发气调贮藏(MA)和充氮气调贮藏(NA)条件下,杨梅贮藏小环境中气体成分的变化和对贮藏效果的影响。结果表明:在MA中,乙烯浓度在2d达到高峰;O2前4d浓度急剧下降,后维持在2.48%至1.78%;CO2一直呈上升趋势,试验过程浓度提高了124.3%。在NA中,乙烯高峰出现时间明显推迟、峰高降低;O2浓度维持在2.28%-1.82%,CO2变化与MA相似,浓度提高了131.3%。MA和NA均有效延缓杨梅鲜果的软化变质,减缓果实硬度和总糖的下降速率。贮藏至16d,NA和MA中果实变质率分别比对照下降31.6%和22.5%,硬度比对照增加25.93%和21.98%,总糖含量处理与对照无明显差异。     

Impact on soil physical properties of using large-grain legumes for catch crop cultivation under different tillage conditions

In Central Europe, various plant species including large-grain legumes and their mixtures are grown as catch crops, particularly between grains harvested early and subsequent summer crops. This article investigates the question of how soil structure in the topsoil is influenced when catch cropping with large-grain legumes (experimental factor A: without catch crop, with catch crop) under different ploughless tillage conditions during catch crop seeding (experimental factor B: deep tillage/25–30 cm, shallow tillage/8–10 cm). Five one-year trials were performed using standard machinery at various sites in Germany. Soil core samples extracted from the topsoil in the spring after catch crop cultivation served to identify air capacity, saturated hydraulic conductivity and precompression stress. The above-ground and below-ground biomass yields of the catch crops were also determined at most of the sites. In addition, the soil compaction risk for the working steps in the experiments was calculated using the REPRO model.The dry matter yield of the catch crops varied considerably between the individual trial sites and years. In particular, high levels of dry matter were able to form in the case of early seeding and a sufficient supply of precipitation. The soil structure was only rarely affected positively by catch crop cultivation, and catch crops did not contribute in the short term to loosening already compacted topsoils. In contrast, mechanical soil stresses caused by driving over the ground and additional working steps used in cultivating catch crops often led to lower air capacity in these treatments. This is consistent with the soil compaction risks calculated using the REPRO model, which were higher in the treatments with catch cropping. Catch crop cultivation also only resulted in improved mechanical stability at one location. The positive effect of deep ploughless tillage on air capacity and saturated hydraulic conductivity, however, became more clearly evident regardless of catch crop cultivation. In order for catch crop cultivation with large-grain legumes to be able to have a favourable impact on soil structure, it is therefore important that cultivating them does not result in any new soil compaction. In the conditions evaluated, deep tillage was more effective at loosening compacted topsoil than growing catch crops.     

Efficient reduction of biomass,seed and season long pollen production of common ragweed (Ambrosia artemisiifolia L.)

Ragweed (Ambrosia artemisiifolia L.) is a noxious plant that not only is a troublesome agronomic weed that causes economic damage to agricultural crops but also − and even more importantly − causes severe health problems due to its severe allergenicity. The pollen of invasive ragweed has become a major allergenic risk factor in urban areas in newly occupied regions. Many urban areas prohibit herbicide application; thus, mowing is the most widely used control measure. Counting pollen is labour intensive; therefore, pollen production data are mainly based on estimations. Field experiments were conducted to determine the effects of different mowing scenarios, plant density and cutting height on the biomass, pollen production and seed production of common ragweed plants. Ragweed plants were mown twice: just before the flowering of terminal racemes (BBCH 59) and when the flowers of the re-sprouting lateral shoots reached BBCH 59. A 1- to 3-cm cutting height produced the greatest pollen reduction compared to that of intact control plants (94%) based on a season-long pollen collection. The number of female flowers also significantly decreased (97%). Compared to the control, the onset of pollen discharge was delayed by 5 weeks and the length of the pollen discharge period decreased from 9 to 4 weeks. The season-long unique and reproducible pollen production data can be integrated with airborne pollen modelling and population management strategies.     

CNG发动机燃烧室形状对气流运动和燃烧特性的影响

为提高天然气发动机的燃烧品质,基于6105型涡轮增压CNG发动机,通过建模分析法,对发动机不同燃烧室形状对缸内气流运动和燃烧特性的影响进行了三维数值模拟研究。研究结果表明,燃烧室形状对挤流的形成和燃烧过程有着重要影响。缩口型燃烧室具有较大的挤流强度和较长的涡流持续期,火焰传播速度快,燃烧性能好,但其火花塞附近的热负荷较大,NOx的含量高。敞口型燃烧室挤流强度较弱,火焰传播速度较慢,燃烧性能最差。直口型燃烧室则介于两者之间,既能保证较快的火焰传播速度和较好的燃烧性能,又降低了其火花塞附近的热负荷和NOx的排放量,是较适合天然气发动机采用的燃烧室。     

基于冠层温度和土壤墒情的实时监测与灌溉决策系统

设计了一个可以在线连续监测田间作物冠层温度、环境信息和土壤墒情的实时灌溉决策系统,并将其安装于农田进行了1 a实际运行和观测。系统采用太阳能供电和微处理器进行数据采集和管理,为野外的实际应用提供了保障。系统配置了红外温度、空气温/湿度、土壤水分/水势等传感器,能够及时采集田间全面的同步数据,排除了异地观测所形成的数据误差。采用悬臂式多点采集下垫面红外温度检测方法,可以快速采集更多和更高精度的数据,避免单点测量的人为误差。系统配备的快速锁紧装置,能够根据下垫面作物的生长情况进行传感器位置高度调节,使检测数据更符合田间实际情况。通过运行管理和监测数据分析可见,所监测数据能够很精细的刻画田间作物实际生长状况,可以用于灌区综合灌溉决策,实现田间精量灌溉管理和控制,为灌溉管理的精量化和智能化提供数据支持。     

静压式平面空气轴承压力场的有限元分析

采用有限元理论分析了静压式平面空气轴承的压力场，并讨论了空气轴承压力场边界条件的处理。分析结果表明，空气轴承的压力场呈现尖峰状分布。分析结果已应用于三坐标测量机的空气轴承设计中，取得了令人满意的效果。     

不同送风和载物方式作用下冲击式速冻设备中虾仁冻结过程的比较

以明虾虾仁为研究对象,利用数值模拟结合实验验证的方法,研究两种送风方式(单侧送风和双侧送风)和两种载物方式(板带载物和网带载物)对虾仁冻结过程的影响,找到使虾仁冻结时间最短的送风和载物方式。研究发现:对于虾仁冻结来说,采用双侧送风+网带载物可以使虾仁表面流场流速更大,有利于提高换热效率,减少虾仁冻结时间,相对于其他送风方式和载物方式来说可缩短虾仁冻结时间的14%～25%;双侧送风有助于低速侧形成提高虾仁下表面流速的涡流,而网带载物可以避免在虾仁下侧面与网带交界处以及虾仁头部形成射流"真空区",上述均有助于提高虾仁表面风速,缩短虾仁冻结时长;但是冻结速度越快,虾仁冻结均匀性则越差。在本次实验中,虾仁内外最大温差出现在实验组D(双侧送风+网带载物),最大温差可达13.02℃。     

EC细网格模式2m气温预报产品在崂山地区的验证

选取2015—2019年青岛市崂山区10个气象自动站的日气温数据和EC细网格模式2 m气温预报产品,验证EC细网格模式2 m气温预报产品最低温度和最高温度在青岛崂山地区的准确率,同时分析崂山地区温度的时间、空间分布特征,对预报产品进行订正,在实际业务中进行推广,提高预报的准确率,做好公众气象服务。结果表明,气温存在年变化差异和季节内差异,同一种温度下,春季和夏季的区域分布比较类似,秋季和冬季的区域分布比较类似;崂山区内EC细网格24 h最低温度预报值偏高,最高温度预报值偏低,最低温度的预报总体准确率比最高温度的预报总体准确率要高,西部地区的预报准确率要高于东部地区的准确率;通过订正后,发现最低温度4个季节的预报准确率都在50%以上,最高温度订正后的准确率,除夏季59%以外,其他各季节均在75%以上。     

Transient heat transfer characteristics of air-array-jet impingement with different nozzle arrangements on high-temperature flat plate in small jet-to-plate distance

Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionless jet-to-plate distance(H/D)was 0.2,and non-dimensional nozzle-to-nozzle spacing(S/D)was 3,4,5 and 6,respectively.It is found that the quenching time is shortened at a constant total mass flow at air jet inlet m·(m·=218.21 kg/h),and the heat transfer uniformity is deterio-rated as S/D increases.However,the adding reversed-flow nozzles can shorten the quenching time of the glass plate considerably with a modest change in the heat transfer uniformity.The results at variable m·are the same as those at a fixed m·.Furthermore,the parity and arrangement of nozzles are also discussed,It is found that an odd number of nozzles is more beneficial for transient heat transfer.Based on these results,an appropriate proposal for ultra-thin glass tempering process is presented.     

不同干燥方式对红托竹荪干燥特性和品质的影响

为提高红托竹荪干燥品质并获得最佳干燥工艺,采用真空红外干燥（vacuum infrared drying,VID）、气流冲击干燥（air impingement drying,AID）、控湿干燥（moisture control drying,MCD）等不同干燥方式对红托竹荪进行对比研究,以热风干燥（hot air drying,HAD）作为对照组,研究不同干燥方式及温度对红托竹荪干燥品质的影响。试验结果表明不同干燥方式对竹荪宏观品质产生了显著影响,其中MCD可获得最小的色差?E和收缩率,AID则能够保证较高的复水比;干燥速率方面,MCD在前期能够获得较高的干燥速率,但后期干燥速率会放缓,而AID在整个干燥过程都具有较高的干燥速率,干燥时间较短;在成分保留上,MCD可以保留较高含量的多糖、三萜和黄酮,而采用VID可以有效保护多酚。单位能耗随干燥温度的升高明显降低,不同方式下VID的干燥能耗值整体偏大,MCD的单位能耗最低（18.82 kW·h/kg）。通过主成分分析法,上述干燥方式对红托竹荪综合评分后得到的结果排序为：MCD>AID>VID>HAD,MCD干燥方式中采...