Expression of Anti-Lipopolysaccharide Factor Isoform 3 in Chlamydomonas reinhardtii Showing High Antimicrobial Activity

Antimicrobial peptides are a class of proteins with antibacterial functions. In this study, the anti-lipopolysaccharide factor isoform 3 gene (ALFPm3), encoding an antimicrobial peptide from Penaeus monodon with a super activity was expressed in Chlamydomonas reinhardtii, which would develop a microalga strain that can be used for the antimicrobial peptide production. To construct the expression cluster, namely pH2A-Pm3, the codon optimized ALFPm3 gene was fused with the ble reporter by 2A peptide and inserted into pH124 vector. The glass-bead method was performed to transform pH2A-Pm3 into C. reinhardtii CC-849. In addition to 8 μg/mL zeocin resistance selection, the C. reinhardtii transformants were further confirmed by genomic PCR and RT-PCR. Western blot analysis showed that the C. reinhardtii-derived ALFPm3 (cALFPm3) was successfully expressed in C. reinhardtii transformants and accounted for 0.35% of the total soluble protein (TSP). Furthermore, the results of antibacterial assay revealed that the cALFPm3 could significantly inhibit the growth of a variety of bacteria, including both Gram-negative bacteria and Gram-positive bacteria at a concentration of 0.77 μM. Especially, the inhibition could last longer than 24 h, which performed better than ampicillin. Hence, this study successfully developed a transgenic C. reinhardtii strain, which can produce the active ALFPm3 driven from P. monodon, providing a potential strategy to use C. reinhardtii as the cell factory to produce antimicrobial peptides.     

Engineered-airlift pumps for aquaculture applications using multiphase flow analysis

Currently, very few aquaculture operations are employing airlift pump technology for water recirculation, aeration, and waste removal. This is likely due to the poor design and lower efficiency of traditional airlift design, the limited amount of research effort that has been invested in improving performance capabilities of air lift pumps and the general lack of awareness of the industry about the inherent advantages of airlift systems. A new efficient airlift pump is hydrodynamically designed by incorporating the Volume of Fluid (VOF) multi-phase model along with the K-ε turbulence model utilizing Computational Fluid Dynamics (CFD) tools. The pump is designed to offer a substantial reduction in total energy usage as well as an improved quality of the culture products in order to make it attractive to aquaculture industry. In this study, both numerical and experimental investigations were carried out for airlift systems operating under two different submergence ratios of 50% and 90% in a lab setting using 2.54 cm diameter pumps. Also, the performance of a large-scale pumps of 10.16 cm diameters were also tested in an aquaculture raceway to determine its effect on the operation. The numerical results were found to be in agreement with the experiments within ±20% which is considered very reasonable for multiphase flow analysis. The present study was found to present a great tool for modelling the airlift pump performance, and potentially proposing new designs.     

含刚性沉水植物明渠水流结构的试验研究

【目的】得到含刚性沉水植物明渠的水流结构。【方法】采用粒子图像测速仪(PIV),用有机玻璃棒模拟刚性植物,在不同来水流量、植物密度条件下对明渠水流结构进行了试验研究。【结果】无植物时平均流速沿垂向呈对数分布规律,有植物时则呈现明显的分区分布特性。无植物时紊动强度值沿垂向变化不大,有植物时在植物顶端位置处紊动最剧烈。流量或植物密度越大,植物顶端位置的流速梯度就越大,植物层上方的流速最大值也越大。植物密度越大,植物顶端位置的紊动强度越大,植物密度对水流紊动强度由最大值减小到最小值的区域影响很大。【结论】刚性沉水植物的存在会改变水流结构,增强紊动掺混,增强流体质点交换和能量传递,且上述影响会随着流量或植物密度的增大而增强。     

NO对大鼠中脑腹侧被盖区DA神经元的调节

实验观察了微量注射 NOS抑制剂 L -NAME及微量联合注射 NO的前体 L-精氨酸( L-Arg) L-NAME于大鼠中脑腹侧被盖区( VTA)对该部位多巴胺神经元的调节。发现VTA注射 L -NAME( 1 mg/ 5μL )后 ,伏隔核( Acb)多巴胺 ( DA )代谢产物—双羟苯乙酸( DOPAC)水平升高到注射前的 1 2 2 .5% ( P <0 .0 0 1 ) ,小剂量注射 L-NAME( 0 .2 mg/ 5μL)对伏隔核 DOPAC水平无明显影响 ;同样方法联合注射 L-Arg( 3 0 0 μg/ 5μL) L-NAME( 1 mg/5μL)后 ,伏隔核 DOPAC水平无明显变化。结论 :VTA微量注射 L-NAME兴奋了该部位的DA神经元 ,而 L -Arg L -NAME联合注射 ,却不能影响 DA神经元的活动 ,说明 NO可以通过L-Arg-NOS-NO途径参与 VTA多巴胺神经元的调节     

茶多酚(TP)对家禽免疫功能的研究

选用14日龄健康的海佩科内用仔鸡48羽,随机分成试验(24羽)和对照(24羽)两组.试验组在饲粮中添加0.25％的茶多酚(TP),研究TP对鸡免疫功能的作用.试验结果表明,TP对自然感染法氏囊病鸡,有明显提高(p<0.05)鸡血液中红细胞C_(3b)受体和免疫复合物的含量及保护鸡脾脏正常的免疫功能,同时也发现TP对公母鸡法氏囊的重量有不同影响.本试验表明,TP具有提高家禽免疫功能的作用.     

菜用加工兼用栗永荆3号选育

一般认为我国南方栗仅宜于菜用，加工极易开瓣和糊化，经过几年的筛选和加工试剂，永荆3号品种可生产B－E级标准的糖水栗子罐头。     

有摩擦的高速气体管流

本文以多变热力过程为基础建立了有摩擦管路的计算公式,并对计算方法和有关问题作了分析说明.     

Reproduction in three species of rainbowfish (Melanotaeniidae) from rainforest streams in northern Queensland, Australia

Abstract – The reproductive biology of three species of rainbowfish (Melanotaeniidae) in northeastern Australian rainforest streams was investigated. Two species, Melanotaenia eachamensis and Cairnsichthys rhombosomoides are endemic to the area, whereas the third, M. splendida splendida, is more widespread. The species were all highly fecund, producing many hundreds of eggs between 1.10 and 1.24 mm in diameter. Melanotaenia eachamensis was the most fecund, produced the largest eggs of the three species, and consequently exhibited the greatest maternal investment (as measured by gonadosomatic index). The majority of reproductive effort occurred during the dry season, although reproductively active fish were present year-round for each of the species, but particularly so for M. s. splendida and C. rhombosomoides. No evidence for a role by temperature or photoperiod as environmental cues for reproduction was found, and it was suggested that gonad development was strongly tied to somatic growth. The concentration of reproduction to the dry season ensures that larvae are produced during a period of relatively stable and benign physical conditions. Comparison of temporal changes in gonadosomatic index values suggest that the spawning season of M. eachamensis , which occurs in high-elevation streams, is more restricted and commences about 1 month earlier than either other species. A similar phenology was observed for the M. s. splendida population found at high elevation and highlights the potential for spatial differences in stream productivity to influence life history. ^Note     

管道3PE防腐涂层补口技术标准及规范对比分析

通过对比国内外热收缩带(套)补口技术规范及标准,分析了各项性能指标间的差异,包括材料性能指标、安装工艺及质量检验.指出管道表面处理及底漆涂装是影响热收缩带(套)安装系统性能的重要因素,提出了工程技术规范编制建议.