Metal leaching and toxicity of denitrifying woodchip bioreactor outflow—Potential reuse application

The denitrifying woodchip bioreactor is designed to remediate nitrate-rich water, including those produced from aquaculture effluents. Reuse of treated bioreactor outflows in recirculating aquaculture would offer considerable water savings and valuable alkalinity recuperation. However, such bioreactors may leach detrimental wood-bound contaminants, preventing outflow reuse. To determine water reuse potential, woodchip media from two hardwood species (white ash, Fraxinus americana; Norway maple, Acer platanoides) were evaluated for 206 d under a range of operating conditions (start-up, steady-state, reducing conditions, and drying-rewetting cycles) for a spectrum of potentially harmful dissolved contaminants. Aerated outflows also were evaluated for acute and chronic toxicity to the biologically sensitive invertebrate Ceriodaphnia dubia. Dissolved metal leaching subsided within the first few weeks of operation, though initial concentrations of copper and zinc were detected at concentrations of concern. Elevated concentrations of tannins-lignin and total ammonia nitrogen were detected throughout the study and were influenced by operational phase. Acute toxicity was not generally detected, though chronic toxicity was observed during drying-rewetting cycles in the maple outflows. The measured toxicity was not correlated with water chemistry, indicating an additive effect of several toxicants. Overall, significant differences in outflow water quality between ash and maple wood species were negligible. Results indicated that bioreactor outflows may be applicable for aquacultural reuse, though reusing outflows immediately following start-up or restarting after a dry period would not be recommended.     

Reproduction in three species of rainbowfish (Melanotaeniidae) from rainforest streams in northern Queensland, Australia

Abstract – The reproductive biology of three species of rainbowfish (Melanotaeniidae) in northeastern Australian rainforest streams was investigated. Two species, Melanotaenia eachamensis and Cairnsichthys rhombosomoides are endemic to the area, whereas the third, M. splendida splendida, is more widespread. The species were all highly fecund, producing many hundreds of eggs between 1.10 and 1.24 mm in diameter. Melanotaenia eachamensis was the most fecund, produced the largest eggs of the three species, and consequently exhibited the greatest maternal investment (as measured by gonadosomatic index). The majority of reproductive effort occurred during the dry season, although reproductively active fish were present year-round for each of the species, but particularly so for M. s. splendida and C. rhombosomoides. No evidence for a role by temperature or photoperiod as environmental cues for reproduction was found, and it was suggested that gonad development was strongly tied to somatic growth. The concentration of reproduction to the dry season ensures that larvae are produced during a period of relatively stable and benign physical conditions. Comparison of temporal changes in gonadosomatic index values suggest that the spawning season of M. eachamensis , which occurs in high-elevation streams, is more restricted and commences about 1 month earlier than either other species. A similar phenology was observed for the M. s. splendida population found at high elevation and highlights the potential for spatial differences in stream productivity to influence life history. ^Note     

罐顶对罐壁应力的影响

在大型油罐设计中采用线性理论的方法,分析论述了罐顶对罐壁是否产生影响这一问题。通过对拱顶油罐、浮顶油罐的罐壁边界条件、罐顶边界条件的分析计算,求出各层壁板挠度方程中的待定系数,便可得出其应力。从线性方程中,可看出影响罐壁应力的主要因素是挠度方程中的待定系数。待定系数除受储罐尺寸、液位高度的影响外,还受罐顶重量、罐顶剪力和弯矩的影响。以10万m~3浮顶油罐和拱顶油罐为例,进一步证明,液位是罐壁应力的控制因素,而罐顶重量、罐顶剪力和弯矩对罐壁应力的影响可以忽略不计。     

美国白蛾生物学特性的研究

通过对美国白蛾的生活史、生活习性,各龄幼虫的鉴别特征、卵的发育温度、各龄幼虫的耐饥力及蛹重与携卵量关系的观察研究,提出了蛹重与携卵量关系的直线回归模型: Y=-580.07+5704.28x.     

固支矩形底扁球壳的边界几何缺陷

In this paper, concept of boundary geometrical imperfection during postbuckling process for shallow spherical shell is first presented. The effects of the declination of the rectangular boundary on postbuckling process are also studied by integrated metho     

舍饲安哥拉周岁公羊行为习性观察

对 6只舍饲安哥拉周岁公羊进行连续三天昼夜行为习性观察 ,结果表明 :周岁安哥拉山羊在舍饲情况下每昼夜反刍时间 (min)为 45 7 2 5± 2 4 39,睡眠时间为 2 96 5 0± 41 5 0 ,采食时间为 2 65 0 0± 2 2 31,其他时间为 15 4 2 5± 72 76。反刍与采食的时间比为 1 7∶1,明显大于正常的反刍与采食比 (0 5～ 1)的上限。反刍、睡眠和采食也与其它山羊相差较大。周岁安哥拉山羊的反刍、睡眠多发生在夜间 ,采食活动及其它一些动作如打架、自淫多发生在白天。安哥拉山羊白天排粪、排尿次数多于黑夜 ,昼夜排粪次数差异极显著。安哥拉山羊对牧草及灌木有较强的选择性 ,对饮水的卫生要求极为严格 ,拒饮不干净的水     

鸡蛋消毒方法的对比研究

采用5种消毒方法对鸡蛋蛋壳表面细菌进行杀菌效果试验,结果表明,各处理组之间抑菌效果差异显著(P＜0.05),杀菌效果优劣依次为开水浸烫＞甲醛熏蒸＞过氧乙酸熏蒸＞高锰酸钾浸泡＞过氧乙酸浸泡,开水浸烫操作技术难度较大,容易引起蛋壳破裂,适宜实际生产的消毒方法为过氧乙酸熏蒸和甲醛熏蒸.将消毒处理后的鸡蛋在温度25℃,相对湿度60%～80%贮存20天,开水浸烫处理组鸡蛋仍保持较鲜的品质,其余各组鸡蛋品质较差.结果表明,常规消毒方法(除开水浸烫法)只能抑制蛋壳表面微生物的生长繁殖,不能延缓鸡蛋品质下降达到保鲜鸡蛋的作用.     

Assessing exterior egg quality indicators using machine vision

ABSTRACT

1. The objective of this study was to develop a machine vision method for analysing exterior parameters of chicken eggs to automate the stage of primary sorting.

2. The developed algorithm based on predetermined thresholds calculated egg quality indicators, including geometric dimensions, shape index and the mottling grade. The algorithm was implemented with an experimental setup that combined the image-based and the candling methods. A total of 400 egg samples were analysed.

3. Comparison of results of the algorithm with those obtained using the traditional manual method showed that mean value of radii values difference was 0.095 ± 0.058 mm for the sharp and 0.080 ± 0.047 mm for the blunt end of the egg, with standard deviations of 0.58 mm and 0.49 mm, respectively.

4. The correlation coefficient between the shape index values determined by the two methods was 0.93; the standard deviation of absolute differences between corresponding values was 1.05%.

5. The results of mottling grade estimation were compared using F-measure and confusion matrix.

6. The results allow the possibility to perform the assessment of egg exterior quality factors in an automatic mode, independent of the expertise of a grader.     

浅谈二种生活用具在棉花自交与杂交中的应用

棉花在栽培过程中,为了获得好性状的棉珠,利用自交与杂交技术进行育种,本文论述小铁夹和吸汽水管方法的精髓及注意事项。