投加硅藻土对城镇污水处理厂出水水质影响研究

对好氧池出水混合液进行了加药絮凝试验，探讨了加药量、污泥浓度对絮凝沉淀效果的影响，并通过生产性试验，验证了试验结果的正确性，从而解决了某污水处理厂因进水水质波动影响，出水SS不能稳定达标的问题。     

水头可调薄壁堰式渠道流量智能测控系统优化试验研究

采用巴赞堰流公式计算流量的水头可调薄壁堰式渠道流量智能测控系统通过渠道流量量测与控制试验,验证了其精准的测流功能和智能控制技术的可行性。为进一步提高该测控系统运行的效率和稳定性,减少运行能耗,对矩形薄壁堰堰流公式进行水力试验研究,通过分析堰上水头和流量关系,拟合出矩形薄壁堰流量计算公式。通过向该拟合公式引入修正系数λ=0.848,将测控系统测得的堰上水头数据值代入该拟合公式求得的流量值与电磁流量计测得流量值的差值的平均值为-0.004L/s,标准差为0.119,线性相关系数R2=0.989 1。该拟合公式相对于巴赞堰流公式形式简单、参数较少、运算简便,同时也满足节水灌溉对精准测流的要求,更适用于水头可调薄壁堰式渠道流量智能测控系统,对于在灌区推广和使用该测控系统具有重要的意义。     

Study on Optimum Design of Rectangular Sedimentation Tanks

In this paper,the flow velocity fields,suspended solids concentration fields and flow-through curves in rectangular sedimentation tanks with different reaction baffles location,inlet horizontal velocity and length height ratio are simulated in detail using a developed mathematical model given in Reference 2.According to the numerical results,the influence of different reaction baffles location,inlet horizontal velocity and length height ratio on the operating efficiency is analyzed.Finally,the rational reaction baffles location,inlet horizontal velocity and length height ratio are presented.     

Study on the Sedimentation Rule of the Particles in Debris Flow

In this paper, according to the study on a great number of experiments and data analyses, the sedimentation rule of solid particles in debris flow is set up. Three main factors that influence the particle sedimentation in debris flow were studied; the basic reasons to influence the particle sedimentation were analyzed. The particle sedimentation in debris flow could be divided into three stages,i, e. the starting stage, the quick sedimentation stage and the accumulation stage,and detailed analysis on the sedimentation process each stage was made. The liquid viscosity, particle quality and additional water pressure have an important role on the sedimentation rule of the particle in debris flow.     

平面二维数模研究闸下淤积的缺陷

以姚江大闸和武障河闸为例，对河口水域建闸后的闸下淤积的机理进行了研究。通过应用二维悬沙模型的模拟计算，分析了数学模型在模拟近闸段的淤积时存在的缺陷，对产生问题的原因进行了初步探讨。由于闸下淤积问题存在明显的时空性和区域性特征，应积极研究解决措施。     

Evidence of sedimentation inequality along riparian areas colonised by Impatiens glandulifera (Himalayan balsam)

Soil loss from riparian areas supporting the annual invasive weed, Impatiens glandulifera (Himalayan balsam), was measured and compared with equivalent values recorded at nearby, topographically similar areas supporting perennial vegetation over a cumulative seven-year period, along sections of two separate river systems; one in Switzerland, and one in the UK. Soil loss from colonised locations was significantly greater than from reference locations in four of the seven measurement periods. Despite contrasting results, standard deviations, based on soil losses and gains, were predominantly higher for colonised areas at both rivers over most monitoring periods. These findings indicated that areas colonised by Himalayan balsam experience higher sediment flux in comparison with areas free of invasion. Here, we test those original interpretations by reinterrogating the datasets using a more robust analysis of inequality. Nine datasets were tested, five of which (i.e. 56%) showed that sediment flux was significantly greater at Himalayan balsam-invaded areas than at reference areas. Three datasets showed no difference in sediment flux between invaded and reference areas (33%), and one (11%) showed higher sediment flux at reference areas. Most results uphold our original interpretations and support our hypothesis that hydrochory probably dictates where colonisation initially occurs, by depositing Himalayan balsam seeds in slack or depressional areas along river margins. Once Himalayan balsam becomes established and sufficient perennial vegetation is displaced, seasonal die-off and depleted vegetation cover may increase the risk that some areas will experience significantly higher sediment flux.     

Mesohabitat associations of the threatened San Marcos salamander (Eurycea nana) across its geographic range

相似文献   

Limnology of Macrobrachium amazonicum grow‐out ponds subject to high inflow of nutrient‐rich water and different stocking and harvest management

We evaluated the water characteristics and particle sedimentation in Macrobrachium amazonicum (Heller 1862) grow‐out ponds supplied with a high inflow of nutrient‐rich water. Prawns were subject to different stocking and harvesting strategies: upper‐graded juveniles, lower‐graded juveniles, non‐graded juveniles+selective harvesting and traditional farming (non‐grading juveniles and total harvest only). Dissolved oxygen, afternoon N‐ammonia and N‐nitrate and soluble orthophosphate were lower in the ponds in comparison with inflow water through the rearing cycle. Ponds stocked with the upper population fraction of graded prawns showed higher turbidity, total suspended solids and total Kjeldahl nitrogen than the remaining treatments. An increase in the chemical oxygen demand:biochemical oxygen demand ratio from inlet (4.9) to pond (7.1–8.0) waters indicated a non‐readily biodegradable fraction enhancement in ponds. The sedimentation mean rate ranged from 0.08 to 0.16 mm day^?1 and sediment contained >80% of organic matter. The major factors affecting pond ecosystem dynamic were the organic load (due to primary production and feed addition) and bioturbation caused by stocking larger animals. Data suggest that M. amazonicum grow‐out in ponds subjected to a high inflow of nutrient‐rich water produce changes in the water properties, huge accumulation of organic sediment at the pond bottom and non‐readily biodegradable material in the water column. However, the water quality remains suitable for aquaculture purposes. Therefore, nutrient‐rich waters, when available, may represent a source of unpaid nutrients, which may be incorporated into economically valued biomass if managed properly.     

打结器支架精铸毛坯误差分析与五轴数控加工方法

针对打结器支架铸造毛坯存在误差、支架结构复杂、难以加工成型等问题,为了减小支架毛坯铸造误差对加工质量的影响,基于三维扫描技术对打结器支架毛坯进行逆向检测与分析,得到同一批次铸造支架毛坯的误差分布规律。通过推导不同空间坐标系下的轴孔中心坐标变换规律,提出一种支架轴孔加工位置偏离理想位置的调整方法。针对打结器支架的5个空间交错轴孔和1个凸轮曲面,设计了打结器支架的专用夹具,制定了五轴数控加工工序,通过一次装夹可完成5个空间交错的轴孔和凸轮曲面的加工。将加工成型的支架和其他零部件组装成打结器,进行了方草捆打结试验,结果表明,打结器支架上各轴孔的相对位置与角度关系准确,打结动作精准、可靠,支架加工成品率为99%,方草捆成结率为100%。