筒式结构拆除的力学分析

根据力学原理，分析讨论了钢筋混凝土筒式结构定向倾倒的切口高度和切口角度．     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

二化螟群集性的调查研究

通过对二化螟群集性的调查分析,初步查明在不同类型田、水稻的不同生育期、二化螟幼虫的不同龄次,二化螟幼虫的群集性不同.这为科学制订二化螟防治指标提供了理论依据。     

小麦矮秆育种中性状间关系的多元分析

以7个株高梯度系列的35个系统及5个亲本品种为材料,采用典范分析和逐步回归分析研究了株高及其构成因子与产量因子、产量生理性状间的关系。结果表明:①株高因子通过产量生理性状影响产量因子,一定的生物学产量是获得高产的基础。②矮秆品种的高化对提高产量、千粒重和收获指数有利,对蛋白质含量的影响不明显;高秆品种矮化能显著提高收获指数,对籽粒的蛋白质含量影响不大。③在主要性状符合育种目标的前提下,选择倒二节间较长、第一和第二叶间距略长、穗颈和穗部较长的类型可能对提高产量有利。     

四川的云南松地径胸径相关关系及其应用研究

本文报道了四川的云南松树干在部三个不同部位直径(地表直径d0．00、0.05m高处直径d0.05、0.1Om高处直径d0.10)与胸径(d1．3)的相关关系，利用其编制了四川云南松地径一元材积表，并对其在四川云南松林区进行盗伐木、滥砍乱伐木材积估计和监测森林资源消耗量等方面的应用进行了探讨。四川云南松地径与胸径最佳关系模型为二次抛物线回归方程，相关系数r=0，999217～0．999380，剩余平方和Q=179．3391～226．4480，且d0.10与d1．3相关关系最为紧密。     

四个紫花苜蓿品种种子萌发期耐盐性研究

在实验室内模拟的盐分条件下,用不同浓度的Na Cl盐溶液对4个紫花苜蓿品种(中苜1号、中苜3号、中草3号和陇东苜蓿)种子萌发期进行盐胁迫处理。结果表明:低浓度(0.2%和0.4%)的盐溶液对苜蓿的发芽率和幼苗苗高抑制作用不显著,对幼根具有一定的刺激作用。0.8%和1.0%的Na Cl溶液处理下发芽率、0.6%的Na Cl溶液处理下的幼苗苗高和幼根生长量可以作为苜蓿种子萌发期耐盐性鉴定指标。对四个紫花苜蓿品种的发芽率、幼苗苗高、幼根生长量、耐盐半致死浓度四个指标进行综合分析,结果表明:中苜1号耐盐性最强,其次是中苜3号和中草3号,陇东苜蓿最弱。     

小兴安岭天然林不同树种的树高曲线模型

选用10种树高曲线模型作为候选模型,以决定系数(R~2)、残差平方和(S_(se))和均方差(M_(se))作为模型优劣的评价指标,对小兴安岭天然林中的云杉(Picea asperata)、红松(Pinus koraiensis)、水曲柳(Fraxinus mandschurica)、椴树(Tilia tuan)4种树种的树高曲线模型进行优选。结果表明:云杉、红松和椴树的最优模型均为Logistic模型,水曲柳的最优模型为抛物线模型;云杉和红松两种针叶树种,最优模型的优势不明显,水曲柳和椴树两种阔叶树种最优模型的优势较明显;比较R~2的大小,得出较适合小兴安岭云杉和红松两种针叶树种的树高曲线模型(R~20.8),对小兴安岭阔叶树种的适用程度不具有普遍性,对椴树的适用性好(R~2最大达0.94),对水曲柳的适用性较差(R~20.8)。对水曲柳的树高进行分段研究得出:水曲柳在树高低于9 m时,树高曲线模型较适宜(R~20.8),其中抛物线模型为最优模型;树高较高时,没有适用的树高曲线模型。     

新疆恒源煤矿新近系水体采动等级评价

指出了恒源煤矿侏罗系煤系地层基本无水,主要充水水源为新近系独山子组的孔隙-裂隙含水层,但是主井筒开拓时,开始涌水量很小,继续向下开拓时,井筒涌水量超过1000m3/h。计算了煤层"两带"高度和新近系含水层与下覆煤系地层间距,研究表明:煤系地层与新近系水体间并无直接的水力联系,具体的涌水来源尚无定论,估算矿井的最大涌水量为160.74m3/h,正常涌水量为53.58m3/h。     

基于分段波形的信号瞬时频率计算方法

针对局部均值分解（Local Mean Decomposition，LMD）中乘积函数（Product Function，PF）分量的瞬时频率计算问题，引入了一种新的信号瞬时频率计算方法.该方法基于分段波形，先将信号分成若干个全波段（full wave），然后以一组递增的反正弦函数定义每个全波段的瞬时相位，进而得到信号的瞬时频率.由该方法得到的瞬时频率理论上是正的、稳定的并且能够确保信号局部特征信息的完整.应用该方法计算了仿真信号和实际齿轮故障振动信号的瞬时频率，并与其他方法求得的瞬时频率进行了对比.结果表明，本文方法非常适合求取信号的瞬时频率.