非比例结构阻尼系统的振动控制

提出了一种非比例结构阻尼系统的振动控制方法.把模态阻尼矩阵分为对角阻尼矩阵和对角元素为零的非对角阻尼矩阵,将非对角阻尼矩阵视为小量,用摄动方法求解这个受控系统,可得到非比例阻尼系统的近似解析解,实现对非比例阻尼系统的振动控制.数值模拟说明此方法有较高的精度,可在土木工程高层结构的振动分析中应用.     

高层建筑设计方案的经济合理性探讨

高层建筑的建筑方案和结构方案的优化是整个工程项目经济合理的关键。文章阐述了建筑专业在方案设计阶段应与结构专业设计人员相互配合完成方案设计；在结构设计中应合理运用有关参数，避免人为浪费。     

《建规》《高规》在设计执行中若干问题的思考与建议

针对GB 50016—2006《建筑设计防火规范》GB 50045-95《高层民用建筑设计防火规范（2005年版）》在设计执行中遇到的一些问题,包括对名词术语理解、住宅相关问题、防火门种类和适用部位等问题,结合工作实际进行了分析并提出笔者的见解。     

浅谈南宁市100m左右高度高层建筑基础选型

结合南宁市地质分布情况,从技术（荷载特性）和经济两个层面总结和分析了100m高层建筑基础的选型和方向,为同类高层建筑提供参考。     

Numerical Simulation on Whole Construction Process of High-Rise CFST Structures

The time-changing analysis model for concrete filled steel tubes was established based on the time-changing concrete model of CEB-FIP MC90, in which the interaction between steel tube and concrete core was considered by the restraint conditions of master and slave nodes. The numerical simulation method was developed for analyzing the whole construction process of high-rise CFST structures. A real structure was taken as numerical example, in which the influence of concrete creep and shrinkage as well as construction process was considered. The results of numerical simulation are compared with those obtained from on-site monitoring. It is shown that the concrete creep and shrinkage as well as construction process have big influence on high-rise CFST structures, which should be taken into account in designs and constructions.     

粘滞阻尼墙用于高层钢框架减震控制研究

为了研究粘滞阻尼墙对高层钢框架结构的减震控制效果,本研究采用SAP2000结构分析软件模拟钢框架结构的计算模型,进行无控和有控下结构地震响应的对比分析,来研究粘滞阻尼墙的减震效果。结果表明:钢框架中适量的布置粘滞阻尼墙是一种有效的减震方法。     

高层建筑清水混凝土的质量控制技术措施

该工程的主体工程混凝土要求为清水混凝土,本文论述了为确保清水混凝土质量所采取的一系列施工技术措施.     

Direct Alloying of High Speed Steel M2 with CaWO_4 MoO_3 V_2O_5

The principle and possibility of alloying of high speed steel W6Mo5Cr4V2 (M2) with CaWO 4 MoO 3 V 2O 5 during the steelmaking are discussed, experiments of the alloying technologcial process have been carried out, the properties of M2 product have been determined, the benefit have been analysed. The results show that the rate of recovery of W Mo V are respectively 97.08%, 96.51%, 93.79% during the steelmaking of M2 alloying with CaWO 4 MoO 3 V 2O 5 in induction furnace, the chemical composition and properties of product M2 can meet the demands that the standard of high speed steel M2 requires.