净化液处理对豇豆采后多环芳烃(PAHs)的净化效果研究

为降低蔬菜采后体内多环芳烃(PAHs)对人体的危害风险,以豇豆为材料,利用不同浓度洗洁精、食盐、米酒、米醋、植物油及清水分别对豇豆豆荚进行浸洗,通过高效液相色谱-质谱联用法检测豇豆采后体内PAHs的含量,并筛选出豇豆体内PAHs的最佳净化方法。结果表明,米酒和米醋处理对豇豆体内PAHs的去除效果基本一致,其中米酒处理组的∑PAHs（美国环保局公布的优先监测的16种多环芳烃的含量总和）降低68.92%,米醋处理组的∑PAHs降低73.88%,且对萘、二苯并(a,h)蒽和茚并(1,2,3-c,d)芘等均有明显的去除效果;清水浸洗可有效降低豇豆体内的茚并(1,2,3-c,d)芘含量,但会使菲的含量增加;食盐处理使∑PAHs增加了77.15%,主要表现在增加了2、3环PAHs在豇豆体内的积累;植物油处理可降低个别PAHs单体含量,但会引入其他PAHs单体,同时增加∑PAHs含量。毒性当量计算结果表明,米酒能有效降低豇豆体内的PAHs毒性,同时食盐处理也使豇豆体内的PAHs毒性当量降低。米酒和米醋能有效降低豇豆体内∑PAHs和二苯并(a,h)蒽的含量及其毒性当量。     

城镇化水平计算方法比较分析

城镇化是社会经济发展的必然趋势，与小城镇人口、经济实力、社会发展和环境保护等方面密切相关。城镇化判别指标归纳起来分两大类：一类是单一指标法或称主要指标法；另一类是多项指标法、复合指标法或称综合指标法。在常用的、单一指标法的城镇化水平计算方法中，城镇人口比重指标法和带眷系数法两种方法能够比较准确地反映小城镇的城镇化水平，尤其以城镇人口比重指标法计算结果最符合实际。     

推求合理畦宽的方法及应用

为了寻求合理的节水省时畦宽,以更好地利用现有水源,在1990、1991年试验和实践的基础上,用统计回归分析方法对大城县农田畦田规格进行了分析,求出了合理畦宽,并从灌水持续时间、用电量、提水量等方面对合理畦宽的节水、节能效果进行了分析。     

塔里木沙漠公路沿线机械防沙体系效益评价及防沙带合理宽度的初步探讨

本文通过对塔里木沙漠公路肖塘段（起始段）至塔中段的风沙危害和现有防沙体系进行评价，指出了目前公路沿线防沙体系存在的问题，并给出了沿线防护体系的合理宽度模型及模拟计算结果。     

油草混播种类对油菜生产和草地生产性能的影响

为筛选与门源油菜混播效益最高的牧草种类,解决油菜连作障碍问题,提高青藏高原高海拔区土地的生产能力,本研究采用油菜混播箭筈豌豆、青稞和燕麦的方式,分时段取样,探究了油菜混播不同牧草对在不同时段牧草自身生产能力的影响,并通过土地当量比判断各混播组合的优劣。研究表明油菜-燕麦混播处理在7月6日时表现干重最高,单位面积达174.48 g；在7月21日表现为鲜重和鲜干比最高,在8月15日时表现为株高显著高于单作油菜(p＜0.05),较单作油菜高97.02%；鲜重最高,达2817.00 g。在9月11日,油菜-青稞和油菜-燕麦混播处理的株高显著高于单作油菜(p＜0.05),分别较单作油菜高64.33%和99.68%,以油菜-青稞混播处理的干重最高,达589.00 g,较单作油菜处理高147.51%。油菜-箭筈豌豆混播和油菜-燕麦混播有产量优势,油菜-燕麦混播的土地当量比最高,为1.11,土地利用效果最好。     

Maize/peanut intercropping increases photosynthetic characteristics, ~(13)C-photosynthate distribution,and grain yield of summer maize

Intercropping is used widely by smallholder farmers in developing countries to increase land productivity and profitability. We conducted a maize/peanut intercropping experiment in the 2015 and 2016 growing seasons in Shandong, China. Treatments included sole maize(SM), sole peanut(SP), and an intercrop consisting of four rows of maize and six rows of peanut(IM and IP). The results showed that the intercropping system had yield advantages based on the land equivalent ratio(LER) values of 1.15 and 1.16 in the two years, respectively. Averaged over the two years, the yield of maize in the intercropping was increased by 61.05% compared to that in SM, while the pod yield of peanut was decreased by 31.80% compared to SP. Maize was the superior competitor when intercropped with peanut, and its productivity dominated the yield of the intercropping system in our study. The increased yield was due to a higher kernel number per ear(KNE). Intercropping increased the light transmission ratio(LTR) of the ear layer in the maize canopy, the active photosynthetic duration(APD), and the harvest index(HI) compared to SM. In addition, intercropping promoted the ratio of dry matter accumulation after silking and the distribution of ~(13) C-photosynthates to grain compared to SM. In conclusion, maize/peanut intercropping demonstrated the potential to improve the light condition of maize, achieving enhanced photosynthetic characteristics that improved female spike differentiation, reduced barrenness, and increased KNE. Moreover, dry matter accumulation and ~(13) C-photosynthates distribution to grain of intercropped maize were improved, and a higher grain yield was ultimately obtained.     

前桥摆转转向式四驱底盘结构形状指数的优化

前桥摆转转向式四驱底盘可直接转入下一畦作业,提高了小地块工作行程率,在地头宽度小于等于1个作业宽度时,更有利于机耕过程中的转向操作。为此,通过ADAMS软件仿真,以最小地头宽度为目标对底盘结构参数进行了优化。仿真结果表明,底盘在作业过程中从一畦进入地头直接转入相邻的下一畦时,后内侧轮基本上不吃入上一畦,最小地头宽度与长宽比成反比。在底盘转向时行走轮不干涉后悬挂农具的前提下,底盘最小的理论长宽比应为0.5:1。但由于底盘长宽比受行走轮直径、轮宽及重心的影响,底盘的合理长宽比值范围需趋近于理论长宽比。当机具作业宽幅大于等于机具轮宽时,可直接做倒U形转向;否则采用"4"和歪梨形组合掉头转向,实现地头宽度等于1个作业幅宽的转向。     

离心泵叶轮出口宽度对泵腔内压力脉动分布的影响

在试验和数值模拟相互验证的基础上,开展叶轮出口宽度对离心泵泵腔内压力脉动分布影响的研究．通过试验和数值计算获得离心泵的外特性、泵腔内静压分布、泵腔内压力脉动分布及泵体表面的压力脉动幅值分布,并进行对比分析,结果表明：前泵腔内静压和压力脉动幅值随出口宽度的增大而增大,随半径的减小而增大;后泵腔内静压和压力脉动随出口宽度和半径的变化不十分明显．综合考虑外特性和压力脉动,在比转数 ns ＝97时叶轮出口宽度与叶轮出口直径之比应小于0.06;为了使压力脉动在泵腔内有效地衰减,出口宽度与前腔间隙的比值在1.81附近时最佳．研究结果可用于指导离心泵叶轮的优化设计．     

ASVCP guidelines: quality assurance for portable blood glucose meter (glucometer) use in veterinary medicine

Portable blood glucose meters (PBGM, glucometers) are a convenient, cost effective, and quick means to assess patient blood glucose concentration. The number of commercially available PBGM is constantly increasing, making it challenging to determine whether certain glucometers may have benefits over others for veterinary testing. The challenge in selection of an appropriate glucometer from a quality perspective is compounded by the variety of analytic methods used to quantify glucose concentrations and disparate statistical analysis in many published studies. These guidelines were developed as part of the ASVCP QALS committee response to establish recommendations to improve the quality of testing using point‐of‐care testing (POCT) handheld and benchtop devices in veterinary medicine. They are intended for clinical pathologists and laboratory professionals to provide them with background knowledge and specific recommendations for quality assurance (QA) and quality control (QC), and to serve as a resource to assist the provision of advice to veterinarians and technicians to improve the quality of results obtained when using PBGM. These guidelines are not intended to be all‐inclusive; rather they provide a minimum standard for management of PBGM in the veterinary setting.     

Distributed Power Flow Method Based on Ward Equivalent

With interconnecting and developing of power system, the problem of power flow computation on dispersed data resource need to be solved. A new distributed computation method of power flow based on Ward equivalent is presented. According to master-slaver splitting principle, multi-area interconnected power system is divided into master-slaver areas. Boundary buses in different areas are defined as different bus-types. Neighborhood areas are equivalent by Ward equivalent principle, and the equivalent injection power and equivalent impedance are worked out. Power flows from master area to slaver areas are solved by Newton method, and the equivalent injection power and equivalent impedance on the boundary are modified by their solutions. The process above repeats until to convergence. The proposed distributed power flow method takes full advantage of the information of power, voltage, network configuration in neighborhood areas, so it is better on convergence and quality of solution. The proposed algorithm is testified by IEEE 14-bus system and a practical 181-bus system.