Predicting effective doses for the joint action of two fungicide applications

A function was derived to predict fungicide efficacy when more than one application of a single active ingredient is made to a crop, given parameters describing the dose–response curves of the component single-spray applications. In the function, a second application is considered to act on that proportion of the total pathogen population which was uncontrollable at the time of the first application (represented by the lower asymptote of the dose–response curve for the first treatment), plus any additional part of the population which survived the first application as a result of a finite dose being applied. Data to estimate the single-spray dose–response curve parameters and validate predictions of two-spray programme efficacy were obtained from separate subsets of treatments in four field experiments. A systemic fungicide spray was applied to wheat at a range of doses, at one or both of two times (t₁ and t₂), in all dose combinations. Observed values of the area under the disease progress curve (AUDPC) for septoria leaf blotch (Mycosphaerella graminicola) were used to construct response surfaces of dose at t₁ by dose at t₂ for each culm leaf layer. Parameters were estimated from single-spray and zero-dose treatment data only. The model predicted a high proportion (R² = 71–95%) of the variation in efficacy of the two-spray programmes. AUDPC isobols showed that the dose required at t₂ was inversely related to the dose at t₁, but the slope of the relationship varied with the relative timings of t₁ and t₂ in relation to culm leaf emergence. Isobols were curved, so the effective dose – the total dose required to achieve a given level of disease suppression – was lower when administered as two applications.     

Study on Optimum Design of Rectangular Sedimentation Tanks

In this paper,the flow velocity fields,suspended solids concentration fields and flow-through curves in rectangular sedimentation tanks with different reaction baffles location,inlet horizontal velocity and length height ratio are simulated in detail using a developed mathematical model given in Reference 2.According to the numerical results,the influence of different reaction baffles location,inlet horizontal velocity and length height ratio on the operating efficiency is analyzed.Finally,the rational reaction baffles location,inlet horizontal velocity and length height ratio are presented.     

可视化编程技术在发动机外特性曲线绘制中的应用

通过对汽车发动机外特性的理论分析,在处理汽车发动机外特性曲线时,建立了一种适合处理发动机外特性曲线的三次样条函数拟合的数学模型,在C Builder可视化开发平台上,编制了汽车发动机外特性曲线绘制程序.利用三次样条函数插值法对实验数据进行拟合,实现了发动机外特性曲线绘制的自动化.     

关于滚子链额定功率曲线的探讨

在分析ISO10823、DIN8195、ANSIB29.^-1等标准和有关文献的基础上，结合一些国际知名链条公司的功率曲线，探讨了ISO10823功率曲线的建立基础，提出了使用标准时应注意的问题。     

天津大神堂海洋特别保护区生境修复初步评价

2012年4月、9月和2013年5月、9月份对渤海湾天津大神堂海洋特别保护区分别进行了大型底栖动物调查,用丰度/生物量比较曲线法分析了6个调查站位的大型底栖动物群落投礁前后受污染扰动的变化状况。结果表明,在调查期间保护区大型底栖动物群落表现出从最初的受到中等程度干扰→趋向于受到干扰→群落状况趋向正常,保护区生态状况已经大有好转,人工生态修复效果初显。     

A method of production data analysis for multi-fractured horizontal well in shale gas reservoir

Production data analysis is an effective method of evaluating gas in place, parameters of reservoir and hydraulic fractures. Current model of production data analysis fails to make sense because of the existence of absorption, multi-fracturing, and stimulated reservoir volume (SRV). Considering the effect of desorption, fracture interacting and closed boundary, the authors calculate the productivity of multi-fractured horizontal well in shale gas by Laplace transform and pressure superposition principle. Then theoretical charts of Agarwal-Gardner production decline curves are presented by employing new definition of dimensionless material balance time and dimensionless production, which is based on asymptotic approximations. The result shows that Agarwal-Gardner curves can be divided into two parts where they are scattered in early transient period, and where their shape was influenced by parameters relevant to adsorption, position of each fracture and reservoir geometry, and then drawn to Arps harmonious decline in pseudo steady state period. Reservoir parameters, hydraulic fracture characteristics and gas in place are evaluated by using the type curve matching with actual production data.     

基于ANN的复垦土壤水分特征曲线的预测研究

为能较容易且更准确地获取复垦土壤水分特征曲线,将易测定的土壤特性如土壤质地、容重和饱和含水量作为输入变量,采用基于bagging算法的神经网络法建立了用于预测土壤水分特征曲线的土壤转换函数法(PTFs)模型,并对徐州矿区复垦土壤的水分特征曲线进行了预测,同时与普通BP算法预测精度进行了比较.研究结果表明所建立的PTFs参数模型具有较高的估计精度,bagging算法均方根预测误差比普通BP算法减少了7.5%～27.0%,说明该模型的建立与求解为复垦土壤水分特征曲线的预测研究提供了一条新途径.     

毛乌素沙地土壤水分特征曲线和入渗性能的研究

采用张力计法测定了毛乌素沙地低吸力段土壤水分特征曲线,并用θ=aψ-b模型进行了拟合,分析了各层次土壤的持水和供水能力.结果显示0～20 cm的土壤持水能力最差,但供水能力最强,40～60 cm的土壤持水能力最强,供水能力一般;当土壤吸力达到0.06～0.08 MPa,即土壤容积含水率在1%～3%时,比水容量就已达到了10-1级,标志着土壤水分处于难效水阶段,植物利用比较困难;在室内采用环刀法测定了沙地土壤水分的入渗率,结果显示有植被覆盖的试验区的初始入渗率、稳定入渗率和累积入渗量都比无植被覆盖的对照区大,说明该地区植被对土壤水分的消耗影响显著.     

ALA对西瓜叶片叶绿素荧光光响应曲线的影响

用PAM-2100便携式荧光仪测定50～200 mg·L-1 ALA处理的西瓜幼苗叶片,观察到ALA处理可以提高西瓜幼苗暗适应叶片最大荧光(Fm)、可变荧光(Fv)、PSⅡ最大光化学效率(Fv/Fm)、PSⅡ潜在光化学效率(Fv/F0)以及叶片获取光能能力(1/F0-1/Fm)的效应.对叶绿素荧光光响应曲线的研究表明,叶片PSⅡ有效光化学效率(Fv′/Fm′)、PSⅡ实际光化学效率(ΦPSⅡ)、荧光猝灭系数(qP)和光化学能量耗散(P)均随着光化光照强度的增加呈下降趋势;而非光化学荧光猝灭系数(NPQ)、电子传递速率(ETR)、光化学速率(PCR)、天线热耗散(D)以及PSⅡ反应中心非光化学能量耗散(E)则随着光化光照强度增加呈上升趋势.在作用光照强度为40 μmol·m-2·s-1时,Fv′/Fm′、ΦPSⅡ、qP、P、E、D和NPQ等光响应曲线出现1个明显的转折点;当光化光照强度低于40 μmol·m-2·s-1时,随光照强度增加,曲线呈相反趋势.外源ALA处理明显提高西瓜叶片Fv′/Fm′、ΦPSⅡ、P、PCR和ETR.当光化光照强度高于1 500 μmol·m-2·s-1时,ALA处理叶片NPQ明显高于对照,表现出更强的能量耗散能力.从PSⅡ反应中心能量分配比率上看,ALA处理叶片D下降,E上升,同时保持较高P,说明ALA处理有利于能量进入PSⅡ反应中心,促进光化学效率提高.