The effects of density and artificial substrate on intensive shrimp Litopenaeus vannamei nursery production

Recirculating aquaculture systems (RAS) can be installed indoors, allowing year-round production of tropical animals in nearly any climate. A nursery phase is commonly used in Litopenaeus vannamei production since it allows for enhanced biosecurity and better quantification of animals while reducing space requirements. However, it is unclear whether animal density and inclusion of artificial substrate may improve shrimp performance during the nursery phase. In this experiment, we compared shrimp production parameters in two stocking densities with or without the use of an artificial substrate by creating four treatments: low-density LD; 1500 PL/m⁻³, low-density with substrate LDS, high-density HD; 3000 PL/m⁻³), and high-density with substrate (HDS). The LDS and HDS treatments included 0.46-m² of high-density polyethylene 2.5-cm mesh as a substrate, which increased the tank surface area by 21 %. Each treatment was randomly assigned to four 160-l culture tanks, each with a biofilter. The shrimp had an initial weight of 4 mg and were grown for 50 days. The low-density treatments had significantly higher dissolved oxygen (DO) and pH than the high-density treatments (P ≤ 0.001). Specifically, LDS had the highest DO and pH followed by the LD, HD, and HDS treatments, respectively. High-density treatments had significantly higher NO₂-N levels than low-density treatments during week 2 of the experiment when an unusually high concentration of nitrite was observed. FCR was significantly lower in both low-density treatments than in high-density treatments. At harvest, the total biomass (kg m⁻³) was significantly higher in high-density treatments than in low-density treatments (P ≤ 0.001), and the HDS treatment had a significantly greater biomass output than HD. Producers should consider artificial substrate and higher densities during nursery production to maximize shrimp production; however, the effects on water quality should also be taken into account.     

火炬松短周期工业材不同高度上干缩性能的研究

对湖南同一立地指数（１８）下，５株１７．５年生的火炬松（ＰｉｎａｓｔａｅｄａＬ．）短周期工业材１．３，３．６，５．６，７．６，９．６ｍ５个高度的木材干缩系数、基本密度、生长轮宽度、晚材率和微纤丝角度，按生长轮取样，进行了测量和统计分析．结果表明，弦向、径向、体积干缩系数和干缩比，在树于５个高度之间的差异，均达到了显著水平；各高度干缩系数与生长轮的年龄（离髓心的距离）以及与上述各主要构造因子之间呈显著的线性相关，且相关度度随树干高度的增加而减弱．     

The rates of maize growth and lignin biosynthesis change after root-applied chalcone

The effects of root-applied chalcone at 0.15 mmol L⁻¹ on the growth and lignin biosynthesis in maize were investigated. The contents of 4-coumarate: CoA ligase (4CL, EC 6.2.1.12) substrates in maize shoots were increased more rapidly in the samples with chalcone application than in the control and the increase occurred at ≤ 3 h after the application (HAA). The lignin content was reduced by chalcone at ≤ 6 HAA. The shoot growth was suppressed by chalcone at ≤ 9 HAA. Consequently, the results suggest that chalcone suppressed maize growth by inhibiting monolignol biosynthesis.     

有机生态栽培基质配比对生菜生长及品质的影响

以传统基质草炭、蛭石及腐熟羊粪和玉米秸秆为原料,配制成12种不同配比的栽培基质,以商品叶菜类栽培基质作为对照,研究不同基质配方对生菜生长的影响,以期获得最适合生菜栽培的基质配比组合。结果表明,不同组合基质配比均能满足生菜的正常生长,所有处理的株高、叶面积、单株鲜重和单株干重都较对照组(CK)有着不同程度提高,其中T11(草炭∶腐熟羊粪∶玉米秸秆∶蛭石=1∶4∶3∶4)条件下各指标表现最好,分别较CK提高了31.80%、47.15%、59.43%和79.53%;从生理生化指标来看,T11处理的Vc含量最高,是CK的2.5倍;T10(草炭∶腐熟羊粪∶玉米秸秆∶蛭石=3∶1∶4∶4)的根系活力是所有处理中最高的,达到CK的2.02倍;T12(草炭∶腐熟羊粪∶玉米秸秆∶蛭石=3∶4∶1∶4)处理的叶绿素含量最高,是CK的1.41倍,硝酸盐含量最低,较CK降幅达到74.59%。通过隶属函数进行综合比较分析,我们认为T11是所有供试处理中最适合生菜栽培的基质配比。     

Effect of the Substrates on the Production of Engrafted Vine Cuttings in Heated Greenhouses

This article highlights the results of a long-term research project on the production of grape stalks engrafted by the desk method. The integrated impact of rootstock varieties, modes of stratification, and different substrates on vegetating vine cuttings, raised in heated greenhouses, and the capacity of their acclimatization after planting was studied. The results of the research show that rootstock variety and modes of stratification influence the output of engrafted vegetating cuttings of vines grown in pots using various substrates. In particular, the engrafted cuttings of variety Rkatsiteli produced on two rootstocks, 5 BB and 101-14, passed stratification (a) in sawdust with local electroheating, (b) on the water with its periodic change, and (c) in the layer of perlite. After preplanting preparations they were planted in pots with six different substrates: (1) soil (control); (2) perlite; (3) sawdust; (4) rice husk + soil + sand (1:1:1); (5) peat + soil + sand (1:1:1); and (6) mold + soil + sand (1:1:1). The cuttings were grown with a covered root system in a heated greenhouse for 35–40 days. Forty-day-old vegetating cuttings, after hardening, were planted into the open ground. Specialties were established during the root and shoot formation on vegetating nursery plant grafts during the rooting period. Optimal substrates for growing engrafted cuttings with a covered root system in heated greenhouses for each rootstock and stratification mode were determined.     

适宜天津市基质栽培的番茄品种筛选

利用基质栽培技术,以番茄(Lycopersicon esculentum Mill.)为供试材料,比较了天津市常用的11个番茄品种部分农艺性状、经济性状、果实营养成分指标的差异,通过对这些指标的分析,筛选出最适宜天津市基质栽培的番茄品种。结果表明,粉皇后和傲兰6号在产量、单果重等指标中表现比较突出,适合在天津市以基质栽培方式推广应用。     

Recommendations on Shrinkage and Temperature Reinforcements in Concrete Slabs

The mechanism of shrinkage cracking is discussed with a simple member, which is fully restrained and subjected only to an axial restraining force caused by shrinkage, while a simple procedure is presented for the determination of the number and spacing of the cracks and the average crack width. With the simple model, some examples are shown to compare the provisions for minimum shrinkage and temperature reinforcement in GB 50010-2002 Code, ACI 318-02 Code and AS 3600-1988 Code. The results show that the provisions in GB 50010-2002 Code are too weak in comparison with the others. Finally, some recommendations are proposed.     

精密滴灌灌水器注塑工艺模拟与优化

通过正交优化试验设计,以注塑工艺模拟代替实物进行试验,研究了注塑工艺参数对LDPE材料灌水器制品收缩率的影响。模拟确定了各工艺参数对制品收缩率及收缩率变化的影响度,并优化取得了最佳的注塑工艺参数。在模拟结果的基础上一次试模成功,灌水器制品的流道部分精度达到±0.01mm。     

稻草、玉米芯调理牛粪堆肥成型育苗基质试验

以稻草和玉米芯为调理料,分别与主体原料牛粪按质量比1∶4混合堆沤腐熟后获得牛粪稻草基质和牛粪玉米芯基质,以这2种基质为原料进行压缩成型试验,探讨了土壤添加量、原料含水率、成型压力以及成型温度等操作因素对基质块成型品质的影响及作用规律。结果表明:牛粪稻草和牛粪玉米芯2种基质块的抗跌碎能力基本持平,其中牛粪稻草基质块的容重较大,吸水性和保水能力更强;添加土壤对2种基质块的抗破碎能力均有一定的提高,但不添加土壤2基质块也具有良好的抗破碎能力,能满足育苗过程对其机械强度的要求;适宜的原料含水率、成型压力和成型温度范围为10%~15%、10~15 k N和80~120℃。