漆树酶在漆酚树脂上的固定化研究

介绍了漆酚树脂吸附金属离子后对漆树酶的固定化方法，比较了Ｆｅ＾３＋和Ａｌ＾３＋、漆酚树脂和漆酚－水杨酸接枝树脂对漆树酶的固定化结果显示，漆酚－水杨酸－Ａｌ螯合树脂对漆树酶的固定化活力最高，测定了溶液ＰＨ，环境温度对固定化漆树酶活性的航固定化漆酶的重作用性。另外，测定了固定化漆树酶的米氏常数，Ｋｍ＝４．９×１０＾－３，并讨论了Ｋｍ小于天然漆树酶的米氏常数的原因。     

二甲硝咪唑盐的合成研究

本文报道以简便易行的方法合成水溶性二甲硝咪唑盐，收率高达95％以上，具工业化应用价值。     

甲醛捕捉剂在胶合板生产中的应用

普通UF树脂胶中添加甲醛捕捉剂H300或H800后,其固化时间明显延长.采用H300或H800改性的UF醛树脂胶黏剂生产胶合板,在保证胶合强度的前提下,板材的甲醛释放量达到国标E2或E1级要求.     

Changes in Endopeptidase Activity during Photosynthetic Declination in Rice Leaf

Two japonica rice varieties, Wuyujing 3 and 97-7, were used to study the changes in contents of soluble protein, free amino acids and endopeptidase activity during photosynthetic declination. The content of soluble protein in flag leaf of cv.Wuyujing 3 was higher than that of cv. 97-7, but decreased rapidly in Wuyujing 3. Free amino acids in flag leaf and the thirteenth leaf of Wuyujing 3 started to increase 10 days before the turning point of photosynthetic declination (TPPD), while it occurred just 1-2 days before TPPD in the flag leaf and the thirteenth leaf of 97-7. During reversible phase of photosynthetic declination,endopeptidase activity remained at a low level and increased slightly only in the later part of this phase. Then it rose up rapidly at irreversible decline phase and reached a very high level. For Wuyujing 3, the change in endopeptidase activity in the thirteenth leaf was parallel to that in flag leaf. However, for 97-7, the rapid increase of endopeptidase activity in the thirteenth leaf started later than that of flag leaf. The results implied that the rate of protein breakdown and conversion to transportable nitrogen in leaves of 97-7 was slower than that in leaves of Wuyujing 3 during photosynthetic declination and it led to relatively lower seed setting rate and fully filling grains rate in 97-7. This may be one of the important reasons why 97-7 could not bring the high yield potentiality into play and the findings may be taken into consideration while breeding for high potential varieties in future.     

改善E1级胶合板用UF胶粘剂预压性能的研究

利用氧化淀粉在树脂合成后期、API在调胶时加入分别对脲醛树脂进行改性，探讨改性UF对胶合板预压强度的影响。采用正交实验法对比改性后胶合板的预压性能和改性后胶合板的甲醛释放量的变化。结果表明：随着API量的加大，胶合板的预压性能得以提高；而氧化淀粉改性后则随着量的加大，一定范围内胶合板的预压性能得以提高，加入量继续加大后反而下降。     

Physiological Basis of Irrigation Scheduling for Seed Production in Egyptian Clover Syn. Berseem (Trifolium alexandrinum L.) Crop

A field experiment was conducted to find out the critical physiological stages of irrigation schedules inducing better growth, physiological efficiency and seed yield potential of berseem ( Trifolium alexandrinum L., Var. S-99-1). For this purpose eight irrigation treatments were made comprised of four treatments of three irrigation (W₁, W₂, W₃ and W₄), three treatments of four irrigation (W₅, W₇ and W₈) and one treatment of five irrigation (W₆) at various physiological stages i. e. regeneration, flower initiation, full bloom, seed initiation and advance seed development stage.
Thus based on the experimental results the physiological role of watering in berseem seed production could be discussed as:
With-holding of irrigation either at regeneration or at full bloom stage developed potential water stress in plants as indicated by high proline content of irrigation treatments — W₄, W₁ and W₇; and further brought out disturbance on the formation of carotene, synthesis of water soluble sugar and translocation of sugar towards reproductive organs during grain development stage. These stresses adversely affected the plant growth and flowering behaviour. The irrigation at seed initiation stage increased the seed yield. Continuous irrigation did not appear to be useful. Thus it can be concluded that irrigation at three critical physiological stages i. e. regeneration, full bloom and seed initiation was found to be essential for obtaining potential seed yield of berseem.     

测定石膏性盐渍土水溶性盐的适宜水土比

土壤水溶性盐的含量与组成随制备浸出液的水土比例不同而异,对含石膏的盐渍土测定结果的影响尤为显著。为了正确反映田间水溶性盐的实际状况,作者进行了三种不同水土比例制备浸出液的对比试验。结果表明,适宜水土比为1:1,其测出的盐分含量与饱和泥浆法按近,且操作简便、快速,在我国一般土化分析实验室均可采用。     

催干剂对氨基环氧树脂阴极电泳漆的影响

以氨基环氧树脂为基体树脂，Co^2 ,Pb^2 盐为催干剂合成了阴极电泳漆，并对膜性能进行考察，结果表明，所合成的阴极电泳涂料在PH值为6－7、电泳时间2min的条件下。加入不同的催干剂，在不同的烘干温度下，得到性能不同的漆膜。经过膝膜综合性能试验，结果表明，加入钴和铅复合催化剂，在160℃左右烘干20min，可得到完全固化，硬度较高、耐潮、耐盐、耐酸碱性较好的漆膜。     

红汁乳菇多糖提取最佳工艺研究

对红汁乳菇多糖提取、纯化工艺进行了优化研究，结果表明在料液比1：30，浸提温度95％浸提时间2h,pH8．0，可获得最佳提取效果。在醇析浓度为70％，V(氯仿)：V(正丁醇)=1：0．2，V(氯仿 正丁醇)：V(样品)=1：l时，纯化含量为58％。同时用超声波法对红汁乳菇多糖的提取作了研究，其得率为6.99％，效果较佳。