基于有限元的汽车扭臂热锻工艺研究

文章以汽车扭杆力臂为研究对象,通过DEFORM-3D有限元分析对汽车扭杆力臂热锻工艺过程进行模拟试验,分析了成形过程中的上模载荷情况、应力应变场分布情况和温度场的变化规律。以提高产品质量和降低载荷为主要目的,给出合理的热加工参数,分析结果能为类似锻件的热模锻工艺和模具设计提供依据。     

富锗酵母培养物对下笼蛋鸡肉品质、肠道菌群及结构的影响

本试验旨在研究富锗酵母培养物对下笼蛋鸡肉品质及肠道的影响。选取505日龄健康的海兰褐壳蛋鸡480只,随机分为4组,每组5个重复,每个重复24只鸡。对照组饲喂基础日粮,试验组在基础日粮中分别添加12、16、20 mg/kg的富锗酵母菌培养物。预试期7 d,正试期为42 d。结果表明:与对照组相比,12、16、20 mg/kg组腿肉的蒸煮损失分别降低45.2%、33.6%、39.7%(P<0.01),pH均高于对照组(P<0.01);16mg/kg组腿肌的亮度(L~*)低于对照组(P<0.05);12、16、20 mg/kg组腿肌的剪切力分别比对照组低44.13%、56.07%、50.60%(P<0.01);各试验组胸肌pH均高于对照组(P<0.01),16mg/kg组的pH高于12、20mg/kg组(P<0.05);与对照组相比,16mg/kg组乳酸菌数量升高(P<0.05);空肠中,各试验组的绒毛长度高于对照组(P<0.01);16、20 mg/kg组绒毛长度/隐窝深度高于对照组(P<0.01)。结果显示,日粮中添加富锗酵母培养物可以改善下笼蛋鸡小肠的形态结构和肠道菌群平衡,提高鸡肉品质,建议添加量为16 mg/kg。     

关于我国海水网箱养鱼发展现状与危机分析及可持续发展的探讨

我国海水网箱养鱼发展现状是以个体联合体生产经营为主体的低技术水平的数量规模化，众多传统港湾已形成了大范围的严重超负荷养殖状态，其对环境巨大的污染力引发鱼病猖獗和频受赤潮侵袭，已面临严峻的养殖环境危机。本文综合分析了我国海水网箱养鱼的发展现状与负面效应及其现状危机，并初步进行了危机根源和可持续发展的讨论分析。     

田间小棚繁殖烟蚜茧蜂的繁蜂效果研究

研究了田间小棚繁殖烟蚜茧蜂的繁蜂效果,比较了在不同接蜂量和蚜量范围条件下的僵蚜数量及其羽化情况。接蜂量和接蜂时的蚜量是影响僵蚜数量的2个重要因素,以接蜂时的蚜量对繁蜂效果的影响更为明显。在接蜂量为蜂(♀)蚜比1∶100、蚜量范围2 000~3 000头/株的条件下,可获得较好的繁蜂效果,僵蚜的数量可达到8 000个/株以上。在繁蜂前期僵蚜的质量较高,僵蚜的羽化率可保持在90%以上,在繁蜂后期受重寄生蜂的影响,僵蚜的质量明显下降。应用田间小棚繁殖烟蚜茧蜂时,重寄生蜂是影响后期繁蜂质量的重要因素。     

13～18周龄笼养蛋鸭适宜蛋白质和蛋氨酸水平的研究

用 32 4羽满 1 2周龄的金定鸭 ,通过饲养试验、代谢试验、屠宰试验和对试鸭产蛋期 (1 9～ 2 8周龄 )产蛋性能的观察 ,研究了在等能条件下(ME :1 1 51MJ/kg) ,不同蛋白质水平 (CP :1 3 %、 1 5 %、 1 7% )和蛋氨酸水平 (Met/CP :0 0 1 7、 0 0 2 2、 0 0 2 7)组成的 9种饲粮对 1 3～ 1 8周龄笼养蛋鸭的生长性能、养分利用、体成分沉积和产蛋期产蛋性能的影响。结果表明 :该阶段饲粮粗蛋白、蛋氨酸水平对体增重影响不显著 (P >0 0 5) ;体增重与蛋氨酸 (% )呈一定的正相关 (r=0 4574) ;CP为 1 3%、Met/CP为 0 0 2 7组采食量一直较稳定、较高 ,且饲料效率又好。代谢试验 :不同粗蛋白、蛋氨酸水平饲粮对试鸭氮存留率和能量的利用率影响显著(P <0 0 5或P<0 0 1 ) ,且它们随饲粮CP水平的升高而降低 ,随蛋氨酸水平升高而升高 ;磷的利用率也分别以CP为 1 3%的水平和Met/CP为 0 0 2 7的水平极显著地高于其他水平对磷利用率 (P <0 0 1 )。屠宰试验 :当Met/CP为 0 0 2 7时 ,体氮沉积量和体磷沉积量最佳。产蛋性能 :开产日龄和高峰日龄与 1 3～ 1 8周龄CP食入量呈弱的负相关 (r=- 0 1 83 3和r=- 0 0 984) ,与蛋氨酸食入量呈正相关 (r =0 5780和r =0 435 0 )。饲粮粗蛋白、蛋氨酸水平对 1 9～ 2 8周龄     

中药骨疏康对笼养蛋鸡生产性能的影响

54羽 2 0周龄伊莎蛋鸡分为 2组 ,A组为正常组 (2 7羽 ) ,B组为已发生骨质疏松组 (2 7羽 )。每组又随机分为 3组 ,每组 9只 ,分别喂骨疏康 1号、骨疏康 2号和对照组。试验期间 ,每天记录产蛋情况 ,定期测定骨矿含量、雌激素水平。结果表明 :骨疏康 1号能显著提高产蛋率 (P <0 0 5) ;骨疏康 2号在B组能显著提高产蛋率 ,在A组差异不显著 ,骨疏康 1号、 2号之间差异不显著。骨疏康 2号能显著提高蛋壳强度。中药对骨矿影响不显著。VitD3能显著提高产蛋率 ,改善蛋壳品质     

Determining spatial feed distribution in sea cage aquaculture using an aerial camera platform

Within this paper we describe an unmanned aerial vehicle (UAV) based method to estimate the spatial feed pellet distribution in salmon fish-cages and exploit it within a case study to determine the radial pellet distribution for different rotor spreaders and blower configurations. Compared to previously used methods, capturing pellets thrown from a rotary feed spreader in rows of Styrofoam boxes, the UAV based method is simpler and faster to setup and allows to cover a larger portion of the sea cage surface area. We compare results obtained with the Styrofoam box method with results we obtained by an automatic analysis of aerial videos taken by the UAV during feeding experiments. The employed method helps to gain insight into the spatial feed pellet distribution in full-scale salmon fish-cages where the feeding pipe and actual fixation of the spreader may influence the dynamic behaviour of the feeding system. This can also be seen as a step towards a continuous measuring of the feed pellet distribution, particularly in view of possible future feeding systems that may allow to adapt the feed pellet distribution to the actual fish distribution.     

Human Simulated Intelligence Motion Control for Three-link Acrobot on Horizontal Bar

The design of multi-controller and multi-mode control law is presented for the three-link Acrobot on horizontal bar by employing Human simulated intelligent control method based on sensory-motor Schema.Imitated the characteristics of gymnast's swing-up and handstand movement,the control process of robot is divided by six sequence phase.Then the sensory cell and motor cell and the group of sensory-motor schema is designed based on the analysis of quality-quantity combination.The simulation results show that the controller ensures the gesture and the energy to the desired goal,farther more the motion control of giant swing backword is realized in the simulation.     

Experimental Research on High-strength Inorganic Anchoring Material

A new type of inorganic anchoring material is developed as a substitution for anchoring adhesive to overcome some imperfections in the process of planting reinforcing steel bar.The mix proportion of the anchoring material is determined by experiments.The compressive strength,adhesive force to concrete,volume stability and anchoring force with steel bar are studied.The early strength of the anchoring inorganic material is quite high: for 1d up to 38.5MPa and 3d up to 60MPa.It is a good adhesive to concrete and the adhesive strength of 28d is about 2MPa.The anchoring material will have tiny volume expansion with the age,which is beneficial to enhancing the anchoring force.The essential component of the inorganic anchoring material is cement-based material,so some defects of the organic macromolecular material can be avoided,such as poor stability and requirement for vigorous construction conditions.Its characteristics in early strength,adhesive force to concrete and volume expansion can satisfy the requirement of the construction to the planting reinforcing steel bar and the loading force,thus it can be used as a substituting material for anchoring adhesive.