欧式木窗专用推台铣主轴动平衡方法研究

介绍了普及型欧式木窗专用推台铣床的作用及其特性，阐述了欧式木窗推台铣床主轴的平衡理论基础．指出了该机械系统的动平衡方法，并通过试验做出了分析。     

浅谈地下车站侧墙大块定型移动模架施工技术

随着城市地铁的飞速发展,地铁车站在条件满足的情况下大都采用明挖法施工。在施工主体侧墙时采用满堂红支架法施工,但因施工时工期较长且易存在一些质量通病,因此,近年来大块定型移动模架被得到了广泛的应用。     

关于藏书倒架的研究与探讨——以中国矿业大学图书馆文昌科技图书阅览室为例

结合工作实际探讨藏书倒架的前期准备工作及倒架时的路线设计、人员组织安排和倒架后的环节完善。以期减轻图书馆人员在倒架工作中的劳动强度和工作量，提高工作效率。     

Study on the Land Use Right in Urban Housing Dismantling and Moving

With the strengthening of constitutional protection that legal private property is not to be encroached upon and the land usufructs paid regime are further clear, the regime of urban housing dismantling and moving is facing a vigorous test. This paper analyzes three problems: the justice of the withdrawal of land use right, the legality of the alteration of the land use right and the rationality of the compensation of the land use right during the urban housing dismantling and moving. Finally, this paper tries to find some effective measures to solve the chain problems.     

A New Method for Parameterized Design of Metallic Doors and Windows

According to the graphics characteristics of metallic doors & windows design and based on the research of graphics dimension restriction problems. This paper provides a new method for parameterized design of metallic doors & windows in virtue of expression solution. In this method, the restrictions of graphic elements have been changed into the parameter expressions of sizes and positions of graphic elements. Through the calculation of such expressions, the parameter driven method has been reached. Thus the parameterization of graphics can be easier and quicker than before. It can be used to setup the open parameterized graphics libraries.     

土方机械落物保护结构动态仿真及试验

简述了土方机械落物保护结构的特点及性能要求,建立了落物保护结构受瞬态冲击响应的有限元结构动力学方程并提出了求解算法。以某装载机落物保护结构为例,建立了落物保护结构的非线性有限元模型,讨论了有限元网格划分及载荷施加方法,分析了落物保护结构的主要设计参数对冲击点最大位移及落锤速度和加速度的影响,并给出了更合理的结构。在试验台上对该装载机落物保护结构进行了落物冲击试验,试验结果和仿真结果吻合较好。落物保护结构的动态仿真为结构的设计提供了依据。     

Analysis of green total factor productivity trend and its determinants for the countries along silk roads

In coping with increasing energy consumption and the consequential environmental pollution, green development is becoming an important part of social development. Since the inauguration of China’s Silk Road Economic Belt Initiative (BRI), economic cooperation between China and other countries along BRI has seen much growth. Therefore, it is of great significance to study the levels of green total factor productivity (GTFP) of the countries in the Silk Roads Economic Belt (B&R) and examine how these levels vary spatially and evolve temporally. In this paper, a panel regression analysis with DEA windows is used to study the spatiotemporal trends of the levels of GTFP. The results are: (1) The B&R countries have seen an increase in their overall levels of GTFP over time; (2) There are regional differences in the levels of GTFP, with higher efficiency in Western Asia and Central and Eastern Europe, and lower efficiency in Southeast and Central Asia; (3) The analysis of GTFP for countries in these regions shows that the efficiencies of most countries have been improving, with that of only a few countries have been decreasing; (4) By using regression analysis, we find that variables such as import, export, industrial structure, and urban affect the B&R countries with growing GTFP.     

南黄海族小黄鱼昼夜渔获率差异的统计学分析

利用2004年度东海区重点渔场底曳拖网渔业资源监测资料,从中选用小黄鱼网次渔获率作为指标值,应用LSD方法对南黄海族小黄鱼昼夜渔获率差异进行了统计学分析,以揭示小黄鱼昼夜的活动规律。结果表明,小黄鱼在不同的洄游阶段昼夜网次间渔获率无显著性差异,昼夜无垂直移动现象,常年处于底层,为典型的底层鱼类;在利用底曳拖网船进行渔业资源调查时,无需修正昼夜网次间小黄鱼的渔获率,用获取的调查数据即可估算资源量。     

牛瘤胃胃电频谱分析中窗函数的选择

采用三种常用的窗口函数,对牛瘤胃４ 种生理状态下胃电（峰电位和慢电位）的频谱进行了分析比较,得出了不同窗函数下频谱中幅值的特性,并分析确定了作者课题组频谱分析时的窗口函数——汉宁窗。     

不同通风形式日光温室湿热特性的数值模拟

研究日光温室不同通风形式对室内湿热特性的影响。采用计算流体动力学数值模拟方法,构建日光温室作物-环境湿热系统的数值模拟模型。将模拟结果与试验测量结果进行对比,温度和相对湿度的模拟值与实测值的最大相对误差分别为4.7%和4.1%,验证了所构建模型的准确性。应用该模型模拟不同通风形式下温室内的气流和温湿度分布情况,比较分析不同的通风形式对室内湿热特性的影响。结果表明：不同的通风形式会影响室内气流的运动轨迹和速度,从而影响室内温度和相对湿度的分布变化。仅开启上通风口通风时,室内的平均温度和相对湿度较高,气候分布均匀,整体变化较小,适宜冬春季节或清晨傍晚室内温湿度较低时的通风要求;仅开启下通风口通风时室内温湿度分布模式均匀性最差,进风口处的温湿度明显低于北墙,且进口存在涡流,不利于作物生长发育;上、下通风口均只开一半通风时,作物区平均温度和相对湿度分别为39.3℃和25%,上、下通风口均全开时作物区平均温度和相对湿度为36.8℃和23.7%,较于前者室内温度和相对湿度分别降低了2.5℃和1.3%,适宜于炎热天气下日光温室内的降温除湿要求。